• 수산해양교육연구
• /
• 제27권6호
• /
• pp.1872-1879
• /
• 2015

The present study was conducted on the improvement of the heat transfer performance of double pipe heat exchangers with helical insert device. Double pipe heat exchangers with helical insert device were studied for improvement of the heat transfer performance of double pipe heat exchangers with helical insert device and plain double pipe heat exchangers were also studied to comparatively analyze heat transfer performance. Experimental results were derived on changes in the Reynold's numbers of the cooling water flowing in helical and plain double pipe heat exchangers and changes in the heat flux of the air. Thereafter, to verify the reliability of the experimental results, the theoretical total energy and the experimental total energy were comparatively analyzed and the following results were derived. The thermal energy of the calorie lost by the hot air and that of the calorie obtained by the cooling water were well balanced. The experiments of plain double pipe heat exchangers and double pipe heat exchangers with helical insert device were conducted under normal conditions and the theoretical overall heat transfer coefficient value and the experimental overall heat transfer coefficient value coincided well with each other. In both plain double pipe heat exchangers and double pipe heat exchangers with helical insert device, heat transfer rates increased as the cooling water flow velocity increased. Under the same experimental conditions, the heat transfer performance of double pipe heat exchangers with helical insert device was shown to be higher by approximately 1.5 times than that of plain double pipe heat exchangers.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.236-241
• /
• 2007

Recently, in accordance with the cultural progress and the improvement of citizen's consciousness level, it is the real situation that the construction of small-scaled Multi-Purpose Hall where various cultural events could be performed, is on increasing. However, because the most of Multi-Purpose Hall had been designed and built up without any consideration on Acoustic Factor, many problems are on occurring thereat. Because those small-scaled Multi-Purpose Hall have been mostly used with the finishing material which contains a high degree of Acoustic Absorption indiscreetly, both diffusion and reflection of sound are not establishing properly, and since the reverberation of sound is very low, in case of musical performance by musical instrument, its sound hears too arid and stiff, there occurs some acoustic defect such as it becomes difficult for music appreciation with sufficient timbre, so that the capability improvement on the matter is urgently requiring situation. On this viewpoint, this Research has caught the Authenticity of the forecasted value and actually measured value using Acoustic Simulation on the subject of the small-scaled Multi-Purpose Hall, and then intended to propose the optimum acoustic condition on the basis of the Authenticity. As the result, it could be designed a Multi-Purpose Hall equipped with the satisfactory acoustic performance compare with the time before improvement, so that it is considered that such research result could be practically used as the fundamental material when design for other similar small-scaled Multi-Purpose Hall in the future.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.653-657
• /
• 2005

This study applied the NDS method to the creek levee and the foundation of a building, for the purpose of ground improvement and cut-off. The conclusions are shown in the following. (1) The results of the field tests in the creek levee are as follows; the N value of the standard penetration test is $2{\sim}3$ before NDS grout and $9{\sim}21$ after NDS grout; in the alluvial layer, $7{\sim}11$ before NDS grout and $14{\sim}23$ after NDS grout. This confirms increasing ground strength with consistency ranging from stiff to very stiff. (2) The result of the permeability test in the creek levee shows that the ground had a great hydraulic conductivity with complete leakage before ground improvement but that the hydraulic conductivity has significantly increased to $3.17{\times}10^{-5}{\sim}4.65{\times}10^{-5}cm/sec$ after ground improvement by the NDS method. (3) The result from the field test of the foundation of the building confirms great reinforcing effects, showing that the allowable bearing capacity has increased from Pa = 5.0 $t/m^2$ before reinforcement to Pa = 25.0 $t/m^2$ after reinforcement.

• Journal of the Korean Wood Science and Technology
• /
• 제25권1호
• /
• pp.15-22
• /
• 1997

The effectiveness of presteaming for improving CCA treatability on refractory Japanese larch heartwood was investigated in this study. Presteaming was effective on improving treatability, and the extent of improvement was dependent on moisture contents of wood specimen and steaming conditions. Green wood showed higher average value in both preservative retention and penetration than dry wood, and steaming under pressure conditions also had higher treatability than steaming at atmospheric conditions. The degree of improvement for treatability was increased with the extension of steaming period. Treatability of dry wood pres teamed under pressure conditions more than 6 hours and green wood for 3 hours was similar to that enhanced by conventional incising. Presteaming green wood under pressure conditions more than 6 hours was more effective than conventional incising in improvement of CCA treatability, and resultant treatability satisfied a minimum value required for CCA-treated wood for being used at the regions of hazard class H3 and H4. In addition, an improvement of treatability by presteaming was due to an increase in permeability resulted from the degradation of hemicelluloses within aspirated pit membrane and cell wall, not the removal of extractives from pit membrane. The reduction in strength, measured as longitudinal compressive strength, due to pres teaming was related with the degradation of hemicelluloses, and was increased as steaming conditions were severe. The degree of strength reduction associated with presteaming treatment to obtain required treatability could be quantified from the relatively good relation between the increase in treatability and the decrease in strength.

• 대한물리치료과학회지
• /
• 제9권1호
• /
• pp.53-59
• /
• 2002

This study is research for effect of the involved lower limb weight bearing training on symmetrical weight supporting rate improvement by practicing involved lower limb weight bearing training of three weeks period to improve standing equilibrium problem with asymmetric weight supporting rate of hemiplegia. In result of the study, it has shown that P-value incase of involved supporting rate is lower than level of significance $\alpha$<.05 and mean improvement rate of experienced group is higher in comparison with controlled group and experienced group. In changing quantity of involved maximum supporting rate, P-value is .26 and higher than level of significance $\alpha$<.05, and so it did not show significant difference statistically. But in case of experienced group between pre and post-test, involved side supporting rate and involved side maximum supporting rate showed significant improvement in all. In comparison of relative characteristic training effect difference, it was shown that train-learning effect on case of 40-60 years old, hemorrhagic patient and standard body bun of patient is valuable, which showed significant improvement in case of paralytic side and disease period, it did not show significant difference on excercise learning effect in two above cases. In the above result, we can say that continuous weight bearing training on the involved lower limb for three weeks period help improve the involved side supporting rate of hemiplegia. Accordingly, the weight bearing training on the involved lower limb is training method that patient can easily train with simple guidance of therapists, without being special expensive equipment. Furthermore it can be helpful to establish home therapeutic plan for hemiplegia through education of a patron.

• 한국기계가공학회지
• /
• 제16권6호
• /
• pp.117-124
• /
• 2017

In this study, we investigated the optimization of process conditions by using the Six Sigma process, design of experiment (DOE) method and response surface method (RSM) to resolve dimensional deviation and appearance problems arising from the shortened process time of the mobile phone rear cover. The analysis of the trivial many was performed by 2-sample T-test and cooling time, and mold temperature and packing pressure were selected as the vital fews affecting the overall width of the product. The optimal conditions of the process were then studied using the DOE and the RSM. We analyzed the improvement effects by applying the selected optimal conditions to the production process and the results showed that the difference between the mean value and target value of the overall width stood at 0.01 mm, an improvement of 88.89% compared to current process that fell within the range of standard dimension. The short-term process capability stood at $4.77{\sigma}$, which implied an excellent technology level despite a decrease by $0.22{\sigma}$ compared to the current process. The difference in process capability decreased by $2.44{\sigma}$ to $0.41{\sigma}$, showing a significant improvement in management capability. Ultimately, the process time of the product was shortened from 18.3 seconds in the current process to 13.65 seconds, resulting in a 34.07% improvement in production yield.

• 대한한방부인과학회지
• /
• 제25권1호
• /
• pp.93-105
• /
• 2012

Objectives: This study explored the relationships between Bone Mineral Density (BMD), Body Mass Index(BMI), Age, pain duration outcomes of treatment for Low Back Pain(LBP) in 3 groups(normal,osteopenia,osteoporosis) of female patients. Methods: We evaluated 32 cases of normal, 30 cases of osteopenia and 38 cases of osteoporosis based on BMD, BMI, Age, pain duration among the female inpatients with LBP caused by lumbar disc herniation, admitted at Jaseng Hospital of Oriental Medicine from January 2010 to December 2011. And we measured VNRS(Verbal Numeric Rating Scale) to evaluate the conservative treatment effects. Results: In improvement of female LBP caused by lumbar disc herniation, BMD(T-score), BMI had not proved correlation(P-value>0.05). Female patients' age was negatively correlated with T-score. In pain improvement, BMD normal group showed more reduction of NRS(numeric rating scale) than osteoporosis group, but that had not proved correlation(p-value=0.893). Conclusions: Statically, among the female inpatients with LBP caused by lumbar disc herniation, had no significant differences between the normal group, osteopenia group and osteoporosis group's improvement rate, depending on treating period.

• 플랜트 저널
• /
• 제17권1호
• /
• pp.58-66
• /
• 2021

최근 미세먼지 등 대기오염물질 배출에 대한 전국민적 우려로 정부는 대기오염물질 배출규제 강화정책을 내놓고 있다. 국내 석탄화력발전소는 대기환경설비 성능개선에 박차를 가하고 있으며, 이 논문에는 500 MW급 표준석탄화력 탈질설비에 촉매단을 추가하는 성능개선사례를 다루고 있으며, 촉매단 추가 전·후 성능시험시험과 NOx제거효율에 따른 탈질설비 핵심성능 인자의 변화를 살펴보았다. 연구결과 촉매단 추가 전·후 탈질설비 효율은 80%에서 88%로 상승했고, 핵심성능인자인 미반응 암모니아, SO2/SO3 전환율은 설계보증치를 만족하였으나, 차압의 경우 설계보증치를 초과하였다. 동시에, NOx 제거효율에 따른 핵심성능인자 변화는, 미반응 암모니아 농도, 차압 항목은 NOx 제거효율이 증가에 따라 같이 증가하는 양상을 보여 관리 및 개선이 필요하다는 결과를 얻을 수 있었다.

• 한국지반신소재학회논문집
• /
• 제18권3호
• /
• pp.1-9
• /
• 2019

본 연구에서는 Fly ash로 매립된 지반에서 쇄석다짐말뚝을 적용하여 지반개량 효과를 확인하고자 하였다. 지반조사 및 콘 관입시험을 통해 Fly ash 매립층의 심도, 강도정수를 산정한 후 STONE C 프로그램을 이용해 개량된 지반의 강도정수 및 이론식을 이용해 대상지반의 지지력과 침하량을 예측하였다. 현장에서 실시한 평판재하시험 결과 쇄석다짐말뚝으로 시공된 Fly ash 지반의 지지력은 설계하중을 상회하였으며, 침하량은 모두 기준치 이내로 만족하였다. 시공 후 콘관입시험에 의한 개량효과를 확인한 결과 GCP시공에 따른 복합지반 형성 및 주변지반의 밀도증가에 따라 콘 관입저항치($q_c$)는 250%~500%가량 증가된 것으로 나타나 Fly ash매립지에서 쇄석다짐말뚝의 지반개량효과가 우수함을 확인할 수 있었다.

• 한국정보전자통신기술학회논문지
• /
• 제16권4호
• /
• pp.203-209
• /
• 2023

Harmony search(HS)는 새로운 하모니를 구성할 때 HM을 참조하는 경우 개별 하모니의 평가를 이용하지 않지만 PSO(particle swarm optimization)는 개별 입자의 평가와 모집단의 평가를 이용하여 해를 찾아간다. 그러나 본 연구에서는 HS와 PSO의 유사점을 찾아 PSO의 입자 개선 과정을 HS에 적용하여 알고리즘의 성능을 향상시키고자 하였다. PSO 알고리즘을 적용하기 위해서는 개별 입자의 local best와 떼(swam)의 global best가 필요하다. 본 연구에서는 HS가 harmony memory(HM)에서 가장 나쁜 하모니을 개선하는 과정을 PSO와 매우 유사한 과정으로 보았다. 이에 따라 HM의 가장 나쁜 하모니를 입자의 PSO의 local best로, 가장 좋은 하모니는 PSO의 global best 최고로 간주하였다. 이와 같이 PSO의 입자 개선과정을 HS 하모니 개선과정에 도입하여 HS의 성능을 향상시킬 수 있었다. 본 연구의 결과는 다양한 함수에 대한 최적화 예시를 통해 비교 확인하였다. 그 결과 정확성과 일관성에 있어 기존 HS보다 제안한 HS-PSO가 매우 우수함을 알 수 있었다.