• Journal of Animal Science and Technology
• /
• v.55 no.5
• /
• pp.359-365
• /
• 2013

Estimate breeding value can be used as single trait animal model was developed directly using the Fortran language program. The program is based on data computed by using the indirect method repeatedly. The program develops a common algorithm and imprves efficiency. Algorithm efficiency was compared between the two programs. Estimated using the solution is easy to farm and brand the service, pedigree data base was associated with the development of an improved system. The existing program that uses the single trait animal model and the comparative analysis of efficiency is weak because the estimation of the solution and the conventional algorithm programmed through regular formulation involve many repetition; therefore, the newly developed algorithm was conducted to improve speed by reducing the repetition. Single trait animal model was used to analyze Gauss-Seidel iteration method, and the aforesaid two algorithms were compared thorough the mixed model equation which is used the most commonly in estimating the current breeding value by applying the procedures such as the preparation of information necessary for modelling, removal of duplicative data, verifying the parent information of based population in the pedigree data, and assigning sequential numbers, etc. The existing conventional algorithm is the method for reading and recording the data by utilizing the successive repetitive sentences, while new algorithm is the method for directly generating the left hand side for estimation based on effect. Two programs were developed to ensure the accurate evaluation. BLUPF90 and MTDFREML were compared using the estimated solution. In relation to the pearson and spearman correlation, the estimated breeding value correlation coefficients were highest among all traits over 99.5%. Depending on the breeding value of the high correlation in Model I and Model II, accurate evaluation can be found. The number of iteration to convergence was 2,568 in Model I and 1,038 in Model II. The speed of solving was 256.008 seconds in Model I and 235.729 seconds in Model II. Model II had a speed of approximately 10% more than Model I. Therefore, it is considered to be much more effective to analyze large data through the improved algorithm than the existing method. If the corresponding program is systemized and utilized for the consulting of farm and industrial services, it would make contribution to the early selection of individual, shorten the generation, and cultivation of superior groups, and help develop the Hanwoo industry further through the improvement of breeding value based enhancement, ultimately paving the way for the country to evolve into an advanced livestock country.

• Journal of the Korea Furniture Society
• /
• v.20 no.4
• /
• pp.253-261
• /
• 2009

school. This study was carried out by literature review. Values of woodworking in extrinsic viewpoint were justified as well-balanced development between left brain and right brain, effective improvement of creative problem solving skill, formation of affirmative attitude toward woodworking, and obtaining method to use tools and equipment effectively. Values of woodworking in intrinsic viewpoint were justified as students' instinct liking of woodworking, psychological stability, and implanting self-confidence in students. In addition to these, woodworking has more educational values. Such values should be justified in the following studies.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2001.10a
• /
• pp.202-206
• /
• 2001

The purpose of this research was to study the influence of machining characteristics for aluminum alloys. The effect of metallic microstructural variables on the measures of machinability of aluminum alloys has no been adequately investigated. Machining Characteristics are influenced significantly by mechanical characteristics, composition and structure of material etcs. For improvement of machining characteristics, various studies are reported. In this paper, composition elements add to aluminum alloys within the limit of sustaining mechanical characteristics of metallic material. We have analyzed dynamic characteristics of cutting resistance, tensile strength value, hardness value etcs.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2008.11a
• /
• pp.872-876
• /
• 2008

설계VE 프로세스 과정 중 기능분석을 성공적으로 수행하지 위해서는 VE대상의 선정이 중요하다. 그러나 설계VE활동시 대상선정 단계에서 설계VE 집중검토대상을 선정해야 하지만 그 활용성이 미비하였으며, 활용방법에 어려움이 따랐다. 이에 본 연구는 대상선정을 명확하게 하여 차후 기능분석에서 효과적으로 반영할 수 있는 방안으로 SWOT분석을 제안하고자 한다.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2015.05a
• /
• pp.138-139
• /
• 2015

Human productivity of Boring Machine for stack is provided but not its hourly workable quantity(Q-value) in the Equipment ownership cost and expenses section of the Poom-Same that is used for construction cost estimation of public sectors in Korea, which leads to less realistic and subjective estimation for the works. The optimized Q-value of the machine is proposed as a result of thorough investigation into many of its operations.

• Journal of the Korea Safety Management & Science
• /
• v.10 no.2
• /
• pp.105-111
• /
• 2008

Six sigma has been evolved into three generations. The first generation focused on eliminating or reducing defects as Motorola originally developed and applied. The second generation focused on reducing costs and improving process efficiency as GE extended the first generation. The next generation of six sigma such as D2MAIC(Discovery, Define, Measure, Analyze, Improve, Control) and ICRA(Innovate, Configure, Realize, Attenuate) has been discussed since the beginning of the 21st century. Although the third generation of six sigma emphasizes value creation, but there are few specific tools for its implementation. In this thesis, some tools for finding opportunities for value creation are suggested. It is explained and discussed with examples how the tools can be applied.

• Journal of Positioning, Navigation, and Timing
• /
• v.2 no.1
• /
• pp.67-74
• /
• 2013

In this study, a remote controller was designed using localization technique. The designed remote controller system consists of infrared transmit/receive module for time synchronization, ultrasonic transmit/receive module for measuring the TOA value, and micro-controller for processing the measured data value. For the position estimation method of remote controller, the Savarese method was used which does not have a problem of diverging solution depending on initial value. The noise included in the measured value was removed by separating the signal and noise with the use of EMD method which is the non-stationary signal analysis technique. The designed system was tested by constructing a simulation environment, and the improvement of accuracy and precision for the application of EMD method was examined.

• Journal of Nutrition and Health
• /
• v.7 no.4
• /
• pp.25-29
• /
• 1974

A complete study of the nutritive value of foods in Korea is required as essential basic data in the planning of food supply and demand, the implementation of national nutritive survey and the development of dietary improvement, nutritional education and various nutritional administration projects. The kinds, numbers and nutritive value of foods we consume in our everyday life vary markedly according to the weather, soils, and the economic system of the region. A study of the current status of Korea in terms of the nutritional value of foods consumed is urgently required. For this reason, a study was conducted of 29 kinds of foods including 5 kinds of mushrooms, 19 kinds of vegetables and 5 kinds of seafoods. The foods examined were randomly collected from major markets in Seoul. The results are summarized in the accompanying tables.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2002.10a
• /
• pp.249-252
• /
• 2002

This model is the daily streamflow model of the Korean watersheds has been developed to simulate the daily streamflow with the data of daily rainfall and pan evaporation. Parameters of this model are the water balance parameters composed Umax, Lmax, FC, CP, and CE and the routing parameters composed $U_i,\;k_1\;and\;k_2$. Among these parameters, CE value is applied one fixed value during the year and coefficient of initial ion K is empirically determined by 0.2. The object of this research is to improve the DAWAST model by application of the monthly value of CE for evapotranspiration and the revised K value for the initial abstraction.

• IE interfaces
• /
• v.11 no.3
• /
• pp.209-218
• /
• 1998

This paper is concerned with the assessment of benefits from water quality improvements. The contingent valuation method (CVM) is employed to directly measure the value of the project for the improvement of the water pollution in the Kumgang area. The perceived value of the improved water quality is investigated by using questionnaires to those concerned living near water-polluted area. The questionnaire includes such questions as the amount to willingly pay, the motivation to pay, the reasons of rejecting the payment, and some socio-economic data. The results of the survey show that (1) non-use value of the environmental goods is perceived to be more important than use-value of the environmental goods; (2) "willingness to pay" for the improved water quality varies according to the degree of educational level. income level and ages; (3) the resistance to pay for the project comes from the "polluter's pay principle".