• 벤처창업연구
• /
• 제16권6호
• /
• pp.69-84
• /
• 2021

최근 4차 산업혁명에 따른 산업구조 변화로 첨단산업 육성에 대한 필요성이 커지고 첨단제조 분야에서의 부가가치 창출이 높은 것으로 나타남에 따라 이에 대한 중요성이 점차 높아지고 있다. 그러나 급변하는 경제 환경속에서 첨단제조 벤처기업은 내부 핵심자원과 경험 부족으로 경쟁 우위를 확보하는데 많은 어려움을 겪게 되면서, 내부 경쟁력을 강화하고 비(非) 핵심 분야를 보완하기 위하여 다양한 경험과 기술력, 풍부한 자원을 보유하고 있는 외부 기업 또는 기관과의 협력활동을 적극적으로 추진하고 있다. 따라서 본 연구에서는 자원기반이론과 거래비용이론을 바탕으로 첨단제조 벤처기업의 외부적 협력활동 경험이 내부 핵심역량과 경영성과에 미치는 영향을 분석하였다. 본 연구의 가설 검증을 위하여 중소벤처기업부에서 1999년부터 편제하고 있는 벤처기업정밀실태조사의 2020년 자료를 활용하였다. 연구 결과에 따르면 첫째, 외부적 협력활동 경험은 첨단제조 벤처기업의 내부 핵심역량과 비재무적 경영성과에 유의한 영향을 미치는 반면, 재무적 경영성과에는 영향이 없는 것으로 나타났다. 그리고 외부적 협력활동 경험은 내부 핵심역량을 매개하여 경영성과에 영향을 미치는 것으로 나타났다. 둘째, 첨단제조 벤처기업의 내부 핵심역량은 비재무적 경영성과와 재무적 경영성과에 유의한 영향을 미치며, 비재무적 경영성과는 다시 재무적 경영성과에 유의한 영향을 미치는 것으로 나타났다. 마지막으로 외부적 협력활동 경험은 개발·제조·마케팅 역량 모두에 긍정적인 영향을 미쳤으며, 경영성과에는 내부 핵심역량을 구성하는 개별 요인이 미치는 영향이 다르게 나타났다. 특히, 개발·마케팅 역량은 비재무적 성과와 재무적 성과에 모두 유의한 영향을 미치는 반면, 제조 역량은 재무적 성과에만 유의한 영향을 미치는 것으로 나타났다.

• 한국가금학회지
• /
• 제50권3호
• /
• pp.143-159
• /
• 2023

본 연구에서 사용된 클로브 에센셜 오일은 로즈마리 에센셜 오일보다 강력한 항산화 효과를 나타내었다. 토종닭 후라이드 치킨 제조 과정 중 로즈마리와 클로브 에센셜 오일의 첨가는 일반성분, pH, TBARS와 관능적 특성에 있어 유의적인 효과를 줄 수 없었다. 0.005CB를 제외한 모든 에센셜 오일 첨가 처리구는 Control보다 낮은 가열감량을 보였고 0.005CB에서는 높은 픽업률을 보였다(P<0.05). 토종닭 후라이드 치킨의 지방산 조성을 측정한 결과, 클로브 에센셜 오일의 항산화 효과로 인하여 0.005CB와 0.01CB는 Control보다 높은 수준의 arachidonic acid를 나타내었다. 토종닭 후라이드 치킨의 휘발성 유기 화합물을 측정한 결과, 로즈마리 에센셜 오일의 특정 풍미성분들이 토종닭 후라이드 치킨에 마스킹 되었고 클로브 에센셜 오일의 항산화 능력을 통해 몇몇 pyrazine류의 물질들을 감소시켰다. 본 연구 데이터는 향후 로즈마리와 클로브 에센셜 오일을 첨가하여 제조한 토종닭 후라이드 치킨의 저장성 연구에 있어 기초 데이터로 활용될 수 있을 것으로 판단된다.

• 한국응용곤충학회지
• /
• 제13권3호
• /
• pp.105-133
• /
• 1974

본 연구는 목련에서 분리한 흰비단병균 Sclerotimu rolfsii Sacc.의 분화형을 밝히고 균계생장 및 균핵형성에 대한 영양생리를 구명코저 vitamin, 질소원, 탄소원의 효과를 검토했으며 또 본 균과 Penicillium sp.와의 생태적 관계를 해명하기 위한 기초적인 연구로서 본 균의 균계생장 및 균핵형성에 대한 Penicillium 배양여액의 촉진효과와 그 요인을 밝히려고 시도하였다. 본 연구결과를 종합해서 적요하면 다음과 같다. 1. 목연에서 분리한 흰비단병균 제1형, 축2형은 배지상의 성상이나 생리적 성질 펄 병원성이 상이하였다. 특히 목연 아카시아에 대한 병원성은 양자 동일하나 콩이나 오이에 대해서는 제2형균이 제1형균보다 더 강하였다. 2. 공시된 14종의 질소원중 $KNO_2$와 glycine을 제외하고는 모두 thiamine hydrochloride 10r/l가 첨가되었을 때 비로소 공시균의 균계생장 및 균핵형성에 이용되었다. 질소의 형태별로 보면 균계생장에 있어서는 $NO_3-N$보다는 $NH_4-N$이 훨씬 더 효과적이며 organic N은 화합물에 따라 상이하였다. 그러나 균핵형성에 있어서는 이와 반대로 $NO_3-N$이 효과적이었다. $NO_2-N$은 균계생장이나, 균핵형성에 전혀 효과가 없었다. 3. 공시 탄소원 7종도 대체적으로 thiamine이 존재하지 않는 한 균계생장이나 균핵형성에 아무런 효과가 없었다. thiamine이 첨가될 경우 균계생장에 있어서 glucose와 saccharose가 가장 효과적이고 maltose와 soluble starch는 효과가 적었으며 xylose, lactose, glyceline은 전혀 효과가 없었다. 균핵형성에 있어서는 loctose를 제외하고는 전구에서 균핵형성을 보였으며 모두 비슷한 효과를 나타냈다. 4. 배지중의 질소원이 동일수준이면 탄소원이 증가함에 따라 균계생장량이 증가하였다. 그러나 질소원의 량에는 한도가 있는 것으로 질소 0.5g/l이상에서는 오히려 균계생장이 억제되었다. 그러나 균핵형성에 있어서는 탄소원의 증가에 따라 균핵형성량이 저하하였다. 5. 공시균은 thiamine 결핍균으로서 균계생장 최적 thiamine 농도는 20r/l이고 이 농도를 초과하면 오히려 균계생장이 억제되는데 150r/l에서는 무첨가구와 거의 같은 정도로 억제되었다. 6. 공시균의 생장에 있어서 thiamine의 첨가에 따른 질소원리용도는 $NH_4NO_3>(NH_4)_2SO_4>asparagine>KNO_3$의 순위이며 질소원별 thiamine 최적요구량은 $KNO_3$인 경우 12r/l, asparagine인 경우 16r/l 정도였다. 균핵형성량에 있어서는 $KNO_3>NH_4NO_3>asparagine>(NH_4)_2SO_4$의 순위로서 thiamine 최적량은 $KNO_3,\;NH_4NO_3$인 경우 8r/l에서 전균핵생산량의 대부분이 형성되나 asparagine인 경우에는 16r/l 정도였다. 7. 배양액의 pH는 공시균이 생장을 개시하자마자 3.5정도로 급격히 떨어지나 그 이후부터는 생장량이 증가함에 따라 완만하게 떨어졌다. 그러나 pH2.2 이하로는 더 내려가지 않았다. 8. 공시균의 균계생장에 대한 각종 vitamin의 상호효과는 thiamine, biotin, pyridoxine, inositol의 4가지 조합에 있어서도 thiamine이 첨가되지 않은 곳에서는 거의 효과가 나타나지 않았다. 그러나 thiamine+pyridoxine, thiamine+inosital, thiamine+biotin+pyridoxine, thiamine+pyridoxine+inositol구에 있어서는 thiamine 단독 첨가구와 동등 혹은 그 이상의 효과를 나타내지만 thiamine+biotin과 thiamine+biotin+inosital구는 오히려 떨어졌다. 균핵형성에 있어서는 thiamine 단독구에 비하여 각구 모두 약간씩 증가하였다. 9. Penicillium 배양여액중에는 공시균의 균계생장을 촉진하는 물질이 존재하며 배양여액 6-15ml/50ml 배양액의 농도에서 거의 최고균계생장량에 달하였다. 10. 질소원으로서 첨가한 $NH_4NO_3$ 혹은 asparagine은 균계생장에 있어서 배양여액농도 여가에 관계없이 $NH_4NO_3$가 더 유효하였다. 11. 배양여액에 대한 일련의 처리에 있어서 휘발성물질분획, 비휘발성물질분획, 휘발산분획, ether 가용성유기산분획, ether 불용성물질분획, cation 흡착물질분획, cation 비흡착물질분획, anion 흡착물질분획 및 비흡착물질분획의 9분획중 비휘발성물질분획, ether 불용물질분획, cation 흡착물질분획 및 anion 비흡착물질분획에서만 균계가 잘 자랐다. 그러나 균핵은 오직 cation 흡착물질분획에서만 형성되었다. 12. 이 결과는 배양여액중에 균계생장물질, 균핵형성물질 및 균핵형성억제물질이 존재하며 이들 물질은 각각 별개의 물질로서 전2자는 비휘발성이고 ether 불용성이며 cation교환수지에는 흡착되지 않는 물질이며 후자는 비휘발성이고 ether 불용성이며 cation 및 anion 교환수지에 흡착되지 않는 물질임을 암시한다. 13. DNP-aminoacids paper chromatography에 의하여 cation 교환수지흡착분획중에서 aspartic acid, cystine, glycine, histidine, lycine, tyrosine 및 dinitroaniline 7종의 아미노산이 검출되었다. 14. S. rolfsii의 균계생장 및 균핵형성은 glutamic acid, aspartic acid, cystine, histidine 및 glycine의 단독첨가나 혼합첨가에 의해서 촉진되지 않았고 다만 tyrosine에 의해서 약간 촉진되었다. 15. 균핵의 습열에 대한 저항성은 균핵의 수분함유량에 따라 다르며 수분함유량이 적은 것이 보다 더 강하였다. 배지에서 채취한 균핵은 제1,2형균 모두 $52^{\circ}C$에서 5분에 사멸하거나 155일간 $26{\circ}C$에서 건조시킨 것은 $52^{\circ}C$에 있어서 제1형균은 15분, 제2형균은 10분, $57^{\circ}C$에 있어서는 제1형균은 5분, 제2형균은 10분처리에 사멸하였다. 16. 배양균핵을 132일간 $26^{\circ}C$에서 건조시킨 것은 제1,2형균 모두 전부 발아하였고 기건상태에서 283일간 방치한 천연균핵도 제1,2균형 모두 발아하였으며 443일간처리한 것도 아직 제1형균 $20\%$, 제2형균 $16$의 발아율을 보지하고 있었다. 17. 저온에 대한 저항성은 균계, 균계괴, 균핵의 순으로 강하였는데 균계는 $-7--8^{\circ}C$ 1주간 처리에서 완전 사멸하였으나 균계괴는 $-17--20^{\circ}C$ 3주에서도 아직 사멸치 않은 것이 있었으며 균핵은 $-17--20^{\circ}C$ 3주에서 대부분 생존하였다. 18. 약제저항력은 승괴수 $0.05%$에 있어서 제1형균은 180분 제2형균은 240분, $0.1\%$에 있어서는 제1형균 60분, 제2형균 30분에 각각 사멸하였고, Uspulun 800배에 있어서는 제1형균은 120분에 사멸하나 제2형균은 180분에도 사멸치 않으며 500배에 있어서는 제1,2형균 모두 90분에 비로소 사멸하였다. 그러나 유산동 $5\%$ 240분, Ceresan 석탄, Mercuron 각 500배 80분처리에도 아무런 영향이 없었다. 19. Benlate와 Tachigaren의 농도가 증가함에 따라 균계생장 억제효과도 증가하였다. 처리 6째에는 Benlate 0.5ppm을 제외하고는 전농도에서 뚜렷한 억제효과를 나타내었으나 12일째에는 농도에 따라 현저한 차이를 나타냈다. Benlate 0.5ppm 처리는 대조구에 비하여 $66\%$, 2.0ppm은 $92\%$의 억제효과를, Tachigaren은 1ppm $54\%$, 1.5ppm과 2.0ppm은 $77\%$의 억제효과를 나타냈다. 양자 모두 500ppm에서는 거의 완전히 균계생장을 억제시켰다. 균핵형성은 Benlate 500ppm과 Tachigaren 500ppm 및 1000ppm에서 $100\%$ 억제되었다. 20. 일반적으로 균계생장량이 증가함에 따라 배지중의 glucose나 $NH_4-N$의 소비량도 증가하였으나 Benlate나 Techigaren을 처리할 경우 그 농도의 증가에 따라 이들의 소비량이 억제되었다. 그러나 Benlate 저농도(0.5ppm 및 1ppm)에 있어서는 $NH_4-N$의 소비가 무처리구보다 많았다. 21. glucose와 $NH_4-N$의 흡수이용효과 즉 glucose나 $NH_4-N$ 1mg을 소비하여 생산된 균계량은 Benlate나 Techigaren의 처리로 말미암아 크게 저하되었다. 그 정도는 농도에 관계없이 처리 3일째에 가장 심했고 이후 시일이 경과함에 따라 높아졌다. Benlate 처리의 glucose를 제외하고는 대체로 농도가 증가함에 따라 흡수이용효과가 저하되었다. 22. 토양배양에 있어서 $CO_2$ 배출량으로 측정한 균계생장은 어느 농도에서나 저지되지 않았고 다만 Tachigaren 100mg/g 토양에서만 현저하게 억제되었다. 균핵형성은 Benlate나 Tachigaren 10mg/g 토양에서 완전히 억제되었다. 23. Benlate와 Tachigaren 0.1, 1.0, 10, 100, 1000ppm에 10분 및 20분간 침지처리한 결과 균핵의 발아억제효과를 인정할 수 없었다.

• 무역상무연구
• /
• 제13권
• /
• pp.869-895
• /
• 2000

The US supports the Information and Communication (IC) industry as a strategic one to wield a complete power over the World Market. However, several other countries are also eager to have the support for the IC industry because the industry produces a high added value and has a significant effect on other industries. Korea is not an exception. Korea recently succeeded in the commercialization of CDMA for the first time in the world, after the successful development of TDX. Hence, it is highly likely to get tracked by the US. Although the IC industry is a specific sector of IT, there is a concern that there might be a trade friction between the US and Korea due to a possible competition. It will be very important to prepare a solution in advance so that Korea could prevent the friction and at the same time increase its share domestically and globally. It will be our important task to solve the problem with the minimum cost if the conflict arises unfortunately in the IT area. The parties that have a strong influence on the US trade policy are the think tank group and the IT-related interest group. Therefore, it would be important to have a close relationship with them. We found some implications by analyzing the case of Japan, which has experienced trade frictions with the US over the long period of time in the high tech industry. In order to get rid of those conflicts with the US, the Japanese did the following things : (1) The Japanese government developed supporting theories and also resorted to international support so that the world could support the Japanese theories. (2) Through continual dialogue with the US business people, the Japanese business people sought after solutions to share profits among the Japanese and the US both in the domestic and in the worldwide markets. They focused on lobbying activities to influence the US public opinion to support the Japanese. The specific implementation plan was first to open culture lobby toward opinion leaders who were leaders about the US opinion. The institution, Japan Society, were formed to deliver a high quality lobbying activities. The second plan is economic lobby. They have established Japanese Economic Institute at Washington. They provide information about Japan regularly or irregularly to the US government, research institution, universities, etc., that are interested in Japan. The main objective behind these activities though is to advertise the validity of Japanese policy. Japanese top executives, practical interest groups on international trade, are trying to justify their position by direct contact with the US policy makers. The third one is political lobby. Japan is very careful about this political lobby. It is doing its best not to give impression that Japan is trying to shape the US policy making. It is collecting a vast amount of information to make a correct judgment on situation. It is not tilted toward one political party or the other, and is rather developing a long-term network of people who understand and support the Japanese policy. The following implications were drawn from the experience of Japan. First, the Korean government should develop a long-term plan and execute it to improve the Korean image perceived by American people. Second, the Korean government should begin public relation activities toward the US elite group. It is inevitable to make an effort to advertise Korea to this elite group because this group leads public opinion in the USA. Third, the Korean government needs the development of a relevant policy to elevate the positive atmosphere for advertising toward the US. For example, we need information about to whom and how to about lobbying activities, personnel network who immediately respond to wrong articles about Korea in the US press, and lastly the most recent data bank of Korean support group inside the USA. Fourth, the Korean government should create an atmosphere to facilitate the advertising toward the US. Examples include provision of incentives in tax on the expenses for the advertising toward the US and provision of rewards to those who significantly contribute to the advertising activities. Fifth, the Korean government should perform the role of a bridge between Korean and the US business people. Sixth, the government should promptly analyze the policy of IT industry, a strategic area, and timely distribute information to industries in Korea. Since the Korean government is the only institution that has formal contact with the US government, it is highly likely to provide information of a high quality. The followings are some implications for business institutions. First, Korean business organization should carefully analyze and observe the business policy and managerial conditions of US companies. It is very important to do so because all the trade frictions arise at the business level. Second, it is also very important that the top management of Korean firms contact the opinion leaders of the US. Third, it is critically needed that Korean business people sent to the USA do their part for PR activities. Fourth, it is very important to advertise to American employees in Korean companies. If we cannot convince our American employees, it would be a lot harder to convince regular American. Therefore, it is very important to make the American employees the support group for Korean ways. Fifth, it should try to get much information as early as possible about the US firms policy in the IT area. It should give an enormous effort on early collection of information because by doing so it has more time to respond. Sixth, it should research on the PR cases of foreign enterprise or non-American companies inside the USA. The research needs to identify the success factors and the failure factors. Finally, the business firm will get more valuable information if it analyzes and responds to, according to each medium.

• Asia pacific journal of information systems
• /
• 제21권2호
• /
• pp.89-116
• /
• 2011

In collaborative tagging systems such as Delicious.com and Flickr.com, users assign keywords or tags to their uploaded resources, such as bookmarks and pictures, for their future use or sharing purposes. The collection of resources and tags generated by a user is called a personomy, and the collection of all personomies constitutes the folksonomy. The most significant need of the folksonomy users Is to efficiently find useful resources or experts on specific topics. An excellent ranking algorithm would assign higher ranking to more useful resources or experts. What resources are considered useful In a folksonomic system? Does a standard superior to frequency or freshness exist? The resource recommended by more users with mere expertise should be worthy of attention. This ranking paradigm can be implemented through a graph-based ranking algorithm. Two well-known representatives of such a paradigm are Page Rank by Google and HITS(Hypertext Induced Topic Selection) by Kleinberg. Both Page Rank and HITS assign a higher evaluation score to pages linked to more higher-scored pages. HITS differs from PageRank in that it utilizes two kinds of scores: authority and hub scores. The ranking objects of these pages are limited to Web pages, whereas the ranking objects of a folksonomic system are somewhat heterogeneous(i.e., users, resources, and tags). Therefore, uniform application of the voting notion of PageRank and HITS based on the links to a folksonomy would be unreasonable, In a folksonomic system, each link corresponding to a property can have an opposite direction, depending on whether the property is an active or a passive voice. The current research stems from the Idea that a graph-based ranking algorithm could be applied to the folksonomic system using the concept of mutual Interactions between entitles, rather than the voting notion of PageRank or HITS. The concept of mutual interactions, proposed for ranking the Semantic Web resources, enables the calculation of importance scores of various resources unaffected by link directions. The weights of a property representing the mutual interaction between classes are assigned depending on the relative significance of the property to the resource importance of each class. This class-oriented approach is based on the fact that, in the Semantic Web, there are many heterogeneous classes; thus, applying a different appraisal standard for each class is more reasonable. This is similar to the evaluation method of humans, where different items are assigned specific weights, which are then summed up to determine the weighted average. We can check for missing properties more easily with this approach than with other predicate-oriented approaches. A user of a tagging system usually assigns more than one tags to the same resource, and there can be more than one tags with the same subjectivity and objectivity. In the case that many users assign similar tags to the same resource, grading the users differently depending on the assignment order becomes necessary. This idea comes from the studies in psychology wherein expertise involves the ability to select the most relevant information for achieving a goal. An expert should be someone who not only has a large collection of documents annotated with a particular tag, but also tends to add documents of high quality to his/her collections. Such documents are identified by the number, as well as the expertise, of users who have the same documents in their collections. In other words, there is a relationship of mutual reinforcement between the expertise of a user and the quality of a document. In addition, there is a need to rank entities related more closely to a certain entity. Considering the property of social media that ensures the popularity of a topic is temporary, recent data should have more weight than old data. We propose a comprehensive folksonomy ranking framework in which all these considerations are dealt with and that can be easily customized to each folksonomy site for ranking purposes. To examine the validity of our ranking algorithm and show the mechanism of adjusting property, time, and expertise weights, we first use a dataset designed for analyzing the effect of each ranking factor independently. We then show the ranking results of a real folksonomy site, with the ranking factors combined. Because the ground truth of a given dataset is not known when it comes to ranking, we inject simulated data whose ranking results can be predicted into the real dataset and compare the ranking results of our algorithm with that of a previous HITS-based algorithm. Our semantic ranking algorithm based on the concept of mutual interaction seems to be preferable to the HITS-based algorithm as a flexible folksonomy ranking framework. Some concrete points of difference are as follows. First, with the time concept applied to the property weights, our algorithm shows superior performance in lowering the scores of older data and raising the scores of newer data. Second, applying the time concept to the expertise weights, as well as to the property weights, our algorithm controls the conflicting influence of expertise weights and enhances overall consistency of time-valued ranking. The expertise weights of the previous study can act as an obstacle to the time-valued ranking because the number of followers increases as time goes on. Third, many new properties and classes can be included in our framework. The previous HITS-based algorithm, based on the voting notion, loses ground in the situation where the domain consists of more than two classes, or where other important properties, such as "sent through twitter" or "registered as a friend," are added to the domain. Forth, there is a big difference in the calculation time and memory use between the two kinds of algorithms. While the matrix multiplication of two matrices, has to be executed twice for the previous HITS-based algorithm, this is unnecessary with our algorithm. In our ranking framework, various folksonomy ranking policies can be expressed with the ranking factors combined and our approach can work, even if the folksonomy site is not implemented with Semantic Web languages. Above all, the time weight proposed in this paper will be applicable to various domains, including social media, where time value is considered important.

• 한국전통조경학회지
• /
• 제36권3호
• /
• pp.115-127
• /
• 2018

천연기념물 제214호 진안 평지리 이팝나무군의 고사(枯死) 및 쇠약(衰弱) 요인의 명확한 진단(診斷)과 처방(處方)을 통한 천연기념물로서의 가치 존속(存續) 방안을 강구하고자 시도된 본 연구의 결과는 다음과 같다. 첫째, 1968년 13그루의 천연기념물 지정 이후, 1973년을 시작으로 근년까지 계속적으로 고사가 진행되어 현재는 3주만 생존하고 있다. 특히 2010년 이후 마령초등학교 담장 후퇴 등 정비과정에서 복토된 토양의 일부 제거에도 불구하고, 계속적으로 고사가 이루어진 것으로 확인된다. 둘째, 지정목 중 1 3번 생존목 또한 고사된 가지가 많고, 잎이 왜소하며, 엽량이 적었다. 1번목은 수세가 '극히 불량'하고 다량의 가지가 이미 고사하였으며, 금년에는 단지 2개 가지에서만 개화가 이루어졌으며 엽량 또한 현저히 적은 상태이다. 2번목 또한 '불량'상태로 잎이 작고 엽밀도도 낮으며 수형의 변형이 이루어지는 등 수세가 쇠약한 상태이다. 현존하는 가장 큰 1번목은 논토양으로 추정되는 점질토가 복토되어 있어 우려를 더하고 있다. 셋째, 평지리 이팝나무군의 토성 분석결과, '미사질양토[微砂質壤土, Silt loam(SiL)]'로 밝혀짐에 따라 미사(Silt)의 성분비가 높음을 알 수 있다. 또한 1번목 북측의 토양산도는 pH 6.6으로 다른 부위의 흙과는 편차가 컸는데 이는 원지반 토양이 아닌 외부에서 반입된 토양으로 복토되었음에 기인한 것으로 판단된다. 더불어 유기물함량은 적정범위보다 높게 나타났는데 이는 보호관리를 위한 시비가 계속적으로 이루어진 결과가 반영된 것이라고 판단된다. 넷째, 진안 평지리 이팝나무군의 고사 및 생육 불량의 근본적 원인으로는 복토(覆土)로 인한 심각한 생리저하의 만성적 증후군으로 판단된다. 이는 신규로 식재된 후계목 또한 일부 고사된 것에서도 그 원인을 찾을 수 있다. 다섯째, 1차적으로 기존 고사의 원인으로 추정되는 복토 부분에 대한 점진적 제거가 시급하다. 무엇보다도 근계부에 복토된 점질토양의 제거를 건의한다. 복토부를 제거한 후 굵은 모래로 치환하고 뿌리의 호흡 개선을 위해 유공관을 설치한다. 그리고 고사한 4번 고사목과 5 6번의 고사흔적인 밑둥은 제근하고, 하층식생은 예초한다. 생존목은 상부 고사지를 제거, 수피 이탈부는 외과수술을 시행하는 한편 생장점 아래에서 전정하여 맹아의 발생을 유도해야 할 것이다. 여섯째, 지하부 뿌리를 확인하여 부패근 절단 및 토양호흡 개선방안을 마련한다. 근계 전반에 대한 추적 굴취 등으로 썩은 뿌리부를 단근하여 새 뿌리의 발생을 유도한다. 일곱째, 이후 잡초 발생과 답압 억제 그리고 토양 보습효과 유지를 위한 멀칭을 시도한다. 또한 지속적 영양공급을 위한 무기양료 엽면시비 및 영양제 나무주사, 무기양료의 토양관주를 고려한다. 향후 모니터링과 예찰방안을 마련하여 계속적으로 변화상을 체크해야 할 것이다.

• 항공우주정책ㆍ법학회지
• /
• 제32권1호
• /
• pp.83-138
• /
• 2017

한 중 FTA가 2015년 12월 20일 발효되었고, 우리나라 제1위의 교역상대국인 중국과의 FTA로서 발효된 후 1년이 경과하였다. 따라서 본 연구에서는 한국과 중국 간 항공운송 교역 동향을 살펴보고, 한 중 FTA의 항공운송서비스 부문에 대한 양허내용을 검토하고, 항공운송 부문에 미치는 영향을 분석하며, 이에 대응하기 위한 우리나라 항공정책의 방향을 도출하여 제시하고자 한다. 2016년 한 중 간 항공운송 교역 동향을 살펴보면, 대중국 항공운송 수출액은 전년대비 9.3% 감소한 400.3억 달러로서, 대중국 전체 수출액의 32.2%를 차지하고 있다. 대중국 항공운송 수입액은 전년대비 9.1% 감소한 242.6억 달러로서, 대중국 전체 수입액의 27.7%를 차지하고 있다. 한 중 FTA의 항공운송서비스 부문 양허내용을 검토해 보면, 중국은 한 중 FTA 협정문 제8장 부속서 중국의 양허표에서 항공운송서비스 분야의 항공기 보수 및 유지 서비스, 컴퓨터 예약시스템(CRS)서비스에 대하여 시장접근과 내국민대우에 대한 제한을 두고 양허하였다. 한국은 한 중 FTA 협정문 제8장 부속서 한국의 양허표에서 항공운송서비스 분야의 컴퓨터 예약시스템서비스, 항공운송서비스의 판매 및 마케팅, 항공기 유지 및 보수 서비스에 대하여 시장접근과 내국민대우에 대한 제한을 두지 않고 양허하였다. 한 중 FTA가 항공운송 부문에 미치는 영향을 분석해 보면, 항공여객시장에 미친 영향으로, 2016년 국제선 중국노선 도착여객은 996만 명으로 전년대비 20.6% 증가하였고, 출발여객은 990만 명으로 전년대비 34.8% 증가하였다. 항공화물시장에 미친 영향으로, 2016년 대중국 항공화물 수출물동량은 105,220.2톤으로 전년대비 6.6% 증가하였고, 수입물동량은 133,750.9톤으로 전년대비 12.3% 증가하였다. 대중국 수출 항공화물 주요품목가운데 한 중 FTA 협정문 중국 관세양허표 상 수혜품목의 수출물동량이 증가하였고, 대중국 수입항공화물 주요품목가운데 한 중 FTA 한국 관세양허표 상 수혜품목의 수입물 동량이 증가하였다. 항공물류시장에 미친 영향으로 2016년 국내 포워더의 대중국 수출 항공화물 취급실적은 119,618톤으로 전년대비 2.1% 감소하였고, 대중국 수입 항공화물 취급실적은 79,430톤으로 전년대비 4.4% 감소하였다. 2016년 대중국 역직구(전자상거래 수출) 수출금액은 1억 916만 달러로 전년대비 27.7% 증가하였고, 대중국직구(전자상거래 수입) 수입금액은 8,943만 달러로 전년대비 72% 증가하였다. 한 중 FTA에 따른 우리나라 항공정책의 방향을 도출하여 제시해 보면 다음과 같다. 첫째 한 중 간에 항공자유화를 추진한다. 한국과 중국은 2006년 6월 중국의 산동성과 해남성에 대해 여객 및 화물 제3자유 및 제4자유를 범위로 하는 항공자유화 협정을 체결하였으며, 2010년 하계부터 양국 간 항공운항을 전면 자유화하기로 합의하였으나, 중국 측에서 항공협정 양해각서 문안의 해석 상 이의를 제기함에 따라 추가적인 항공자유화는 이루어지지 못하고 있다. 한 중 FTA와는 별도의 항공회담을 통해 중국과의 점진적 선별적 항공여객시장 및 화물시장의 항공자유화를 추진해야 할 것이다. 둘째 항공운송산업 및 공항의 경쟁력을 확보해야 한다. 한국의 항공운송산업 경쟁력의 강화방안으로 국적항공사 경쟁력의 강화를 위한 지원체계를 마련하며, 국적항공사의 새로운 공정경쟁의 기반을 조성하며, 국익기반 전략적 네트워크를 구축해야 할 것이다. 한국의 공항 특히 인천공항의 경쟁력 강화방안으로 항공수요 창출 네트워크 경쟁력을 강화하며, 공항시설과 안전인프라를 확충하며, 공항을 통한 새로운 부가가치를 창출하며, 세계 1위 수준의 서비스 수준을 유지해야 할 것이다. 셋째 항공물류업의 경쟁력을 강화한다. 한국의 항공물류업 경쟁력의 강화방안으로 산업트렌드 변화에 대응한 고부가가치 물류산업의 육성전략으로 신규 물류시장을 개척하며, 물류인프라를 확충하며, 물류전문인력을 양성한다. 또한 글로벌 물류시장의 확대전략으로 물류기업의 해외투자 지원체계를 구축하며, 글로벌 운송네트워크 확장에 따른 국제협력 강화 및 인프라를 확보해야 할 것이다. 인천공항 항공물류 경쟁력의 강화방안으로 기업의 물류단지 입주수요에 대응하며, 신 성장 화물분야의 비교우위 선점을 하며, 물류허브 역량을 강화하며, 공항 내 화물처리속도 경쟁력을 향상해야 할 것이다. 넷째 한 중 FTA 후속 협상에서 항공운송서비스 분야의 추가 개방을 확보한다. 한 중 FTA 발효 후 2년 내에 개시될 후속 협상에서 중국 측 항공운송서비스 분야의 양허수준이 중국의 기체결 FTA에 비해 미흡한 분야인 컴퓨터 예약시스템서비스 및 항공기 보수 및 유지 서비스의 양허에 대해 추가 개방을 요구하는 것이 필요할 것이다. 결론적으로 한 중 FTA가 우리나라 항공여객시장, 항공화물시장 및 항공물류시장에 미치는 영향에 대응하여 추진해야 할 정책과제로서, 국적항공사의 경쟁력과 국민 편익을 고려하여 중국과의 점진적 선별적 항공자유화를 추진하며, 항공운송산업과 공항의 경쟁력 강화를 위한 지원체계를 구축하며, 물류기업들의 항공물류시장 진출을 확대하며, 중국 측 양허수준이 낮은 항공운송서비스 분야의 추가 개방 요구를 위한 준비를 해야 할 것이다.

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 1993년도 한국우주과학회보 제2권2호
• /
• pp.17-17
• /
• 1993

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.