• Journal of the korean academy of Pediatric Dentistry
• /
• v.29 no.2
• /
• pp.217-225
• /
• 2002

When we use the flowable resin on the primary molars for quick handling, one of the most important property is the wear resistance. This study was performed to compare the wear resistance characteristics of four flowable composite resins [Arabesk flow (group 1), Tetric flow (group 2), Aeliteflow (group 3), Filtek flow (group 4)] to that of one control composite resin [Z100 (group 5)]. Specimen discs(n=10), 10mm wide and 2mm thick, were stored in distilled water at $37^{\circ}C$ for 7 days prior to testing. The specimens were subjected to 50,000 strokes at 2 Hz on the MTS system. During the test, the following parameters were maintained: the lateral excursion at 0.4mm, occlusal force at 2-100N with a force profile in the form of a half sine wave. The measurements of volume loss, depth of wear, and Vicker's hardness number of composite resins, and SEM observations of the polished and abraded surfaces were established. One-way ANOVA and Scheffe's multiple comparison test were employed to detect statistically significant differences among the flowable composite resin groups and the control composite group at P<.05. The following results were obtained: 1. Group 3 showed the least volume loss, while group 4 showed the greatest. The mean volume loss increased in the following order: group 3

• Journal of the korean academy of Pediatric Dentistry
• /
• v.38 no.4
• /
• pp.348-354
• /
• 2011

Composite resin has been widely used for eroded enamel. But, as there have been many reports about the differences in physicochemical characteristics of eroded enamel compared with sound enamel, an additional effort was thought necessary to obtain the optimal bond strength. As a possible answer, we came to think about the application of infiltrant resin which is known to have an excellent penetration capacity into enamel. This study was performed for the purpose of comparing the bond strength of composite restoration with or without infiltrant resin under adhesives on the artificially eroded enamel. 60 extracted sound maxillary primary incisors were selected and divided into group 1, 2, 3 according to the number of artificial erosion cycling for 5 minute duration in 1% citric acid of pH 3.2 at $37^{\circ}C$. And the labial surfaces were divided into 3 areas; group A, only resin adhesive was used, group I, only infiltrant resin, group IA, infiltrant resin followed by resin adhesive. Afterwards, every specimen was restored with composite resin. Microtensile bond strength was measured and failure modes were observed. The obtained results were as follows: 1. In comparing the bond strength by the degree of enamel erosion, it was revealed the highest bond strength in group 1, followed by group 2 and 3, showing the lowest bond strength in most eroded group(p<0.05). 2. In comparing the bond strength by surface treatment methods, group IA and I showed higher value than group A(p<0.05), with unsignificant difference between group I and IA(p>0.05). 3. In observation of failure mode, it was shown higher frequency of cohesive failure in order of 1-2-3 and IA-I-A. Conclusively, it was shown decreasing tendency of bond strength as the enamel is more eroded, and infiltrant resin was thought helpful to replace or add to the resin adhesive for optimal bonding with eroded enamel.

• Culinary science and hospitality research
• /
• v.22 no.5
• /
• pp.214-230
• /
• 2016

This study was carried out to create a momentum for interest and understanding of local foods and provide base line data for the presentation of future effective development direction by investigating and researching cognitive characteristics, intake frequency, and preference about local foods targeting Pohang citizens. As a result of the investigation on intake frequency and preference of Pohang's local foods, in almost every item such as "gwamegi", "mul-hoe", "Guryongpo daege", "sashimi noodles", "mori noodles", "pidegi cuttle fish", "mulgomtang", "homchibap sikhae", "jesabap sikhae", "whale meat", "gaebokchi", "duchichijjim", "octopus sashimi", "roundnose flounder sashimi", "round flounder jorim", "fried round flounder", "gunsu sorasanjeok", "raw mustard muchim", "miyeongui dish", "sigeumjang", "chives dish", "rolled chives egg", "gokgang spinach", "pine dish", "yellow bean leaves muchim", "pickled green bean leaves", "green bean leaves watery kimchi", "Pohang sunrise bread", "black stone eel dish", "chili jjim", "red-pepper leaves namul muchim", "wild greens bibinbap", "acorn jello muchim", "oimiyeok changuk", "dongdongju", etc., significant differences were shown at the significance level of p<0.05~p<0.001. About understandings, views, development prospects, and development value and so forthof Pohang's local foods, more than 80% of respondents were positive, and in the questions asking concerns about local foods, more than half of the respondents gave a positive opinion, citing that they "have a little interest", and "tend to have an interest". Therefore, it can be seen that the future of local foods is bright. In the future, it is required that various cultural events related to local foods are held, a number of promotions are carried out, specialization of stores is distributed, and, at the same time, local foods are developed and generalized to suit modern sense, maintaining traditional taste in order to become global foods, as well as thedeformation of recipes.

• Korean Journal of Occupational Health Nursing
• /
• v.4
• /
• pp.5-29
• /
• 1995

Occupational health services in Korea have been operated as dual types : one is operated by occupational health care manager and the other is health care agency without their own personnel. The performance of occupational health service should be different due to the variety of characteristics of health care manager and workplace, qualification of health care manager. This study is to analyze performance of occupational health care services with a particular consideration of job performance shape and efficiency, based on comparing those two types of health care management to show on the basic data for the settlement of more qualitative health care management system at workplace. For this study, total 391 places in Seoul and Inchon city area ; 154 places (39.4%) managed by designated health care manager and 237 places (60.6%) by the agency with their commission are selected as research samples. Tools for data collection are questionnares that have been investigated during the period of 20 September 1993-20 December 1993. Those data are compared with percentiles, mean, standard deviation and B/C ratio using SPSS PC program. Conclusions observed from the tests and each comparison could be summerized as follows : 1. Occupational health care have been accomplished at workplaces with designated people than with agencies people, and coverage rate of the occupational health care services has differences, due to management types. The reason of these results is due to visit only one or two times monthly by the agencies, while their own health care manager obsess, at the workplaces all the times. 2. Most of the expense for environmental control of all health care services expenditures shows that there is almost no fundamental improvement because more expenses are needed for procuring personal protective equipment and measuring work environment instead of environmental improvement. 3. It is investigated how much the cost of occupational health care services needs per worker, and calculated how much the cost needs per service hour per worker. The results from this show that the cost of occupational health services at workplaces with their own managers used less than the cost of health care agencies, eventually the former gives better services with less cost than the latter. 4. Benefit/Cost ratio is also produced by total benefit/total cost. The result from the above way reads 4.57 as a whole, while their own manager having workplaces reads 4.82 and the agencies do l.56. Even if their own manager performing workplaces spent more cost, this system produces more benefit than the agencies management. 5. The B/C ratio for medical organization such as local clinic, health care center and pharmacy shows more than or equal to at the workplaces controlled by the agencies. It is inferred that benefit would be much less than the cost used, with so being inefficient. 6. It is assumed that the efficiency ratio of health education is equal to reduction rate of workers medical organization visit. Estimated reduction rate 5%, 10%, 15%, show that the efficiency ratio of health education have an effect on producing benefits. It is estimated that more benefit can be produced if more qualitative education will be provided for enhancing health care efficiency. 7. Results of this study cannot be generalized because there are large scale of deviation in case of workplaces with less than 300 full time workers, but B/C ratio reads 2.69 as a whole and 3.25 at workplaces with their own health care manager are higher than 1.63 at the workplaces manged by the agencies. Finally, all the benefit concerning health care services could not be quantified, measured and shown on the value of money. This is a reason that a considerable part of benefits are so underestimated. This is also thought that measurement tools should be developed for measuring benefits of health care services with a comprehensive quantification. in the future. It is also expected that efficiency of occupational health care services should be investigated using cost-effectiveness analysis.

• Tuberculosis and Respiratory Diseases
• /
• v.60 no.1
• /
• pp.76-82
• /
• 2006

Background : The objective of this study was to understand sleep-related problems, and to determine whether the sleep questionnaires is a clinically useful method in patients who need polysomnography. Methods : Subjects were patients who performed polysomnography and who asked to answer a sleep questionnaires at the Sleep Disorders Clinic of St. Paul's Hospital, Catholic University of Korea. Baseline characteristics, past medical illness, behaviors during sleep-wake cycle, snoring, sleep-disordered breathing and symptoms of daytime sleepiness were analyzed to compare with data of polysomnography. Results : The study population included 1081 patients(849 men, 232 female), and their mean age was $44.2{\pm}12.8years$. Among these patients, 38.9% had an apnea-hypopnea index(AHI)<5, 27.9% had $5{\leq}AHI<20$, 13.2% had $20{\leq}AHI<40$, and 20.0% had $40{\leq}AHI$. The main problems for visiting our clinic were snoring(91.7%), sleep apnea(74.5%), excessive daytime sleepiness(8.0%), insomnia(4.3%), bruxism(1.1%) and attention deficit(0.5%). The mean value of frequency of interruptions of sleep was 1.6 and the most common reason was urination(46.3%). Epworth Sleepiness Scale(ESS) had a weak correlation with AHI(r=0.209, p<0.01). When we performed analysis of sleep questionnaires, there were significant differences in the mean values of AHI according to the severity of symptoms including snoring, daytime sleepiness, taking a nap and arousal state after wake(p<0.05). Conclusion : On the basis of statistical analysis of sleep questionnaires, the severity of subjective symptoms such as ESS, snoring, daytime sleepiness and arousal state after wake correlated with the AHI significantly. Therefore the sleep questionnaires can be useful instruments for prediction of the severity of sleep disorder, especially sleep-disordered breathing.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.2
• /
• pp.275-281
• /
• 2018

It is known that he pollutant emitted from the combustion process of marine fuel oil causes air pollution and harmful effects to the human body. Accordingly, IMO regulates pollutants emitted from ships. However, the regulation of Particulate Matter (PM) is still in the process of debate, so preemptive action is needed. Fundamental research on PM is essential. In this study, the Dimensionless Light Extinction Constant ($K_e$) of fuel oil used in marine diesel engines was measured and analyzed to construct the basic data of the PM generated from marine-based fuel oil. The fuel oil used in the land diesel engine was measured in the same way for character comparison. Both fuel oils differ in sulfur content and density. The $K_e$ was measured via the optical method using a 633 nm laser and was determined by using the volume fraction of PM collected by the gravimetric filter method. The $K_e$ of the PM discharged from marine fuel oil is 8.28, and the land fuel oil is 8.44. The $K_e$ of two fuel oils was similar within the measurement uncertainty range. However, it was found by comparison with the value obtained by the Rayleigh-Limit solution that the light scattering portion could be large. Also, it was found that light extinction characteristics could be different due to the relationship between light transmittance and collected mass.

• Food Science and Preservation
• /
• v.8 no.4
• /
• pp.419-426
• /
• 2001

This study was carried out to develope a convenient instant spiced Toha-jeot. Toha-jeot was manufactured by five samples; 8%, 10%, 13% 23% sodium chloride and a conventional type soy sauce. The Toha-jeot was refrigerated at 4$\pm$1$\^{C}$ for 3 months and then boiled glutinous rice, red pepper powder, chopped garlic and ginger were added, and the spiced Toha-jeot was fermented at 4$\pm$1$\^{C}$ for 2 months, was freeze-dried at a condition of 40$\^{C}$, vacuum 100∼200 millitor millitorr and then packed in vacuum. It is called freeze-dried instant spiced Toha-jeot (FIST). Changes in the components and quality of refrigerated spiced Toha-jeot (RST) and FIST were investigated for 30day. The moisture content of RST was 53.79∼58.91%. Among the mineral constituents of RST, Na and Ca were dominantly occupying. Water activity of FIST was 0.28-0.39 while that of RST was 0.87-0.92. TBA value of FIST was lower than that of RST. Acidity, VBN (volatile basic nitrogen) and TBA(thiobarbituric acid) of the FIST and RST increased slightly, whereas pH decreased. The major components of fatty acids in FIST and RST were analysed into a feater amount of linoleic acid (Cl8:2), palmitic acid (Cl6:1), oleic acid (Cl8:1), linolenic acid (Cl8:3), EPA (C2O:5) and stearic acid(Cl8:0). In sensory evaluation, the RST had higher scores in color and taste and the FIST in chewiness and flavor. The qualitative characteristics and sensory evaluation of FIST and RST were similar.

• Food Science and Preservation
• /
• v.21 no.1
• /
• pp.62-68
• /
• 2014

This study was performed in order to investigate the functional components of 5 kinds of marine algae. We have collected 5 samples of marine algae, such as the sea mustard (Undaria pinnatifida), sea tangle (Laminaria iaponice), sea weed fusiforme (Hizikia fusiforme), green laver (Entetomotpha), laver (Phophyratenera), which have been harvested in Jeollanam-do. In order to examine the functional effects, 5 kinds of marine algae were extracted with hot water ($80^{\circ}C$, 4 hr), ethanol and methanol (R.T., 4 hr), and subcritical water extract (SWE, 3 MPa, $90^{\circ}C$, $150^{\circ}C$, $210^{\circ}C$). A higher yield of extract was obtained through SWE method (3 MPa, $210^{\circ}C$) in all of the samples obtained. The highest total sugar content was 427.4 mg/g in green laver extracted with SWE (3 MPa, $210^{\circ}C$). The content of the SWE total phenolic compounds was higher than that of the water and solvent (methanol, ethanol) extracts. The anti-oxidative activities of the extracts from 5 kinds of marine algae were examined through the DPPH radical scavenging activity test. The SWE (3 MPa, $150^{\circ}C$ and $210^{\circ}C$) of the marine algae was the highest among all of the extracts. As per the results, the SWE of the marine algae contained more functional components and it had a higher antioxidant activity than those of the other extracts. The $IC_{50}$ value of tyrosinase in seaweed fusiforme and laver were higher than those of the other samples. These results strongly support the possible use of marine algae as functional materials.

• The Journal of the Petrological Society of Korea
• /
• v.26 no.1
• /
• pp.45-54
• /
• 2017

The characteristics of the rock cleavage in Jurassic Geochang granite were analysed using the distribution of microcrack lengths and spacings. The phases of distribution of the above lengths and spacings were derived from the enlarged photomicrographs(${\times}6.7$) of the thin section. First, the length and spacing-cumulative diagrams for the six directions of rock cleavages were arranged in increasing order($H2{\rightarrow}R1$) on the density(${\rho}$) of microcrack length. The various parameters were extracted through the combination of the above two types of diagrams. The discrimination factors representing the three quarrying planes and three rock cleavages were acquired through the mutual contrast between the values of parameters. The analysis results of the research are summarized as follows. The evaluation for the six directions of rock cleavages was performed using the parameters such as (1) intersection angle(${\alpha}-{\beta}$) and (2) exponent difference(${\lambda}_S-{\lambda}_L$) between two exponential straight lines related to spacing(${\alpha}$, ${\lambda}_S$) and length(${\beta}$, ${\lambda}_L$). The values of parameters(1 and 2) are in order of H(hardway, (H1 + H2)/2) < G(grain, (G1 + G2)/2) < R(rift, (R1 + R2)/2). On the contrary, the values of the above two parameters for three planes are in order of R < G < H. Meanwhile, the direction of convergence between two exponential straight lines was derived. The above direction is compliant to arrangement of the line os' centering around the line ol. The above two lines converge in the direction of the Y-axis when the line ol and line os' occupy the upper region on the left and the lower region on the right, respectively(R-type). On the contrary, the above two lines converge in the direction of the X-axis when the order of arrangement between line ol and line os' is reversed(H-type). Especially, the positive(+) or negative(-) value of intersection angle(${\alpha}-{\beta}$) is determined by the arrangement of two vertical lines. This type of correlation analysis is useful for evaluating the relative strength of rock cleavage and discriminating three quarrying planes.

• The Journal of the Petrological Society of Korea
• /
• v.26 no.3
• /
• pp.297-309
• /
• 2017

Jurassic granite from Geochang was analysed with respect to the characteristics of the rock cleavage. The comprehensive evaluation for rock cleavages was performed through the combination of the 16 parameters derived from the enlarged photomicrographs of the thin section and the spacing-cumulative frequency diagrams. The results of analysis for the representative values of these spacing parameters with respect to the rock cleavage are summarized as follows. First, the above parameters can be classified into group I (spacing frequency (N), total spacing ($1m{\geq}$), constant (a), exponent (${\lambda}$), slope of exponential straight line (${\theta}$), length of line (oa') and trigonometric ratios ($sin{\theta}$, $tan{\theta}$) and group II (mean spacing (Sm), difference value between mean spacing and median spacing (Sm-Sme), density (${\rho}$), lengths of lines (oa and aa'), area of a right-angled triangle (${\Delta}oaa^{\prime}$) and trigonometric ratio($cos{\theta}$). The values of the 8 parameters belonging to group I show an order of H(hardway, H1+H2)