• Transactions of Materials Processing
• /
• v.14 no.7 s.79
• /
• pp.619-623
• /
• 2005

Lubrication and cooling characteristics are the most important factors of elevated temperature forging lubricants. Usually adopted lubricants in warm forging processes are graphite, synthetic and emulsion lubricants. Most widely and effectively applied lubricants are graphite lubricants, but these have a lot of problems like tool corrosion and dusty environment. In this research, boronite lubricant is considered, because it is able to substitute for graphite. Hot ring compression test, cooling test and mass production test are performed to check the validity of new lubrication pigment.

• Transactions of Materials Processing
• /
• v.7 no.4
• /
• pp.393-399
• /
• 1998

For minimizing wall thickness thinning of circular shells, a new stamping technology, the deep draw-ing process combined with ironing is approached and investigated. The design requirements for the deep drawing shells are to keep the optimum wall thickness with max. 10 percent thickness thinning of the initial blank thickness, to make uniform thickness strain distribution for the wall of circular shell and to improve the shape accuracy for the roundness and concentricity. In order to check the validity and effectiveness of proposed work, a sample process design is applied to a circular shell needed for a 4multi-stepped deep drawing. Through experiments, the variations of the thickness strain distribution in each drawing process are observed. Also a series of experiments are performed to investigate optimum process variables such as the geometry of tooling, radius and drawing rate. In particular, the advantage of current approach with ironing is shown in contrast to the conventional deep drawing process. From the results of proposed method, the optimum value of process variables are obtained, which contribute more uniform thickness strain distribution and better quality in the drawn product.

• Transactions on Control, Automation and Systems Engineering
• /
• v.3 no.3
• /
• pp.176-180
• /
• 2001

In this papers, we derive a simple kinematic and dynamic formulation of an unmanned electric bicycle. We also check the controllability of the stabilization problem of bicycle. We propose a new control algorithm for the self stabilization of unmanned bicycle with bounded wheel speed and steering angle by using nonlinear control based on the sliding patch and stuck phenomena which was introduced by W. Ham. We also propose a sort of optimal control strategy for steering angle and driving wheel speed that make the length of bicycle\`s path be the shortest. From the computer simulation results, we prove the validity of the proposed control algorithm.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.34S no.11
• /
• pp.1-8
• /
• 1997

A prediction model is proposed to describe the path loss in propagation environment of indoor microcell. This model includes the lineal corridor for line--of-sight(LOS) and T-shaped corridor for non-line-of-sight(NLOS). In computation of receiving power the ray tracing technique based on image method is utilized and also reflected waves bounced on the walls and ceilings are considered. To check validity of the computed resuls cross checks between the predicted and measured are being made, which shows a close agreement for LOS case whereas somewhat disagreement for NLOS case. UTD technique is incorporated with propagation path determination algorithm in the treatment of NLOS case.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.34D no.10
• /
• pp.45-52
• /
• 1997

An analysis method for the electromagnetic scattering of a gaussian beam wave by finite periodic conducting strip grating on a groudned dielectric slab is considered. The intergral equation for the unknown current induced on the conducting strip surface is derived and solbed numerically by use of the method of moment. From knowledge of the strip current, the quantities of interest such as radiation pattern, the space wave power radiated into the free space, and the coupled surface wave power propagating along the dielectric slab are computed for the appropriately chosen parametes Some similarity between scattering behaviours of the present geometry and the infinite geometry is examined by observing the Off-bragg as well as bragg blaxing penomena in both geometries.The validity of the numerical results are assured by a check of the power conservation relations.

• Journal of Information Display
• /
• v.1 no.1
• /
• pp.48-51
• /
• 2000

In this work, we proposed a reflective antiferroelectric liquid crystal display (AFLCD) using a half-wave cell whose inplane tilt angle is $22.5^{\circ}$. To check the validity of our design, we fabricated a reflective half-wave AFLC cell of which inplane tilt angle is $24.9^{\circ}$, and measured VIS reflection spectra, contrast ratio and response time. In the results, the half-wave AFLC cell in the reflective configuration exhibits high brightness, high contrast ratio of 20:1, and fast response time of $700{\mu}s$.

• Journal of the Korean Data and Information Science Society
• /
• v.14 no.3
• /
• pp.481-488
• /
• 2003

Kim et al.(2003) studied a prediction model for students likely to transfer. In their study they claim that a training data construction scheme is better than other schemes, which trains neural network on the data from the year right before prediction year. One problem with their claim is that it is based on rather high prediction error rate. In this paper we establish a more sound comparison for various training data construction schemes and check validity of their claim. It turns out that the favored scheme has sufficient advantages over other schemes.

• Child Health Nursing Research
• /
• v.11 no.3
• /
• pp.308-315
• /
• 2005

Purpose: This descriptive study was conducted to examine the status of the health examination in child care centers. Method: The participants in this study were 631 child care centers. A self report questionnaire on health examination which has been examined for content validity, was distributed by mail to 2,000 child care centers using randomized sampling. Result: Of the sample, $76.2\%$ child care centers had done health examination for children. Height & weight, urinalysis, dental check, anemia test and visual acuity were the most frequently performed items. The rate for maintaining a health record was highest in the national/public child care centers. Child care centers more closely related to community health centers, showed higher rates of health examination. Conclusion: Health care personnel and financial aids should be provided for child care centers to enhance the level of health management of children.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.4
• /
• pp.8-17
• /
• 1999

In this paper, a proposal for improving the performance of IF in-phase combiner is presented in view of simple hardware design and good performance for space diversity application. By adding the stable normalization circuit to the phase detector, better performances are obtained even for a severe notch depth of 30 dB. To check the validity of this proposal, various results based upon numerical simulation and laboratory test are presented here in conjunction with 64-QAM digital radio relay system.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2002.11a
• /
• pp.423-433
• /
• 2002

A very fast method of moments(MoM) for the analysis of microstrip structure is considered based upon the use of rooftop basis and razor test functions in conjunction with a new closed-form Green's functions. The present method presents a robust approach to obtain the Green's functions which can be derived by use of only one set of approximation parameters independently of operating frequency range. Moreover, using the present MoM scheme, the MoM matrix elements can be analytically evaluated with few number of terms in comparison with the previous method. So, the computational efficiency can be improved significantly without loss of the precision. In order to check the validity of the present method, performance is demonstrated for the example of a coaxially-fed microstrip transmission line and the present results are compared with the previous results.