• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1995년도 제9회 학술발표회 논문개요집
• /
• pp.151-151
• /
• 1995

Nitrogen implantation process has been applied for improvement of wear resistance of Z Zircaloy-4 fuel cladding materials. Nitrogen was implanted at 120 ke V to a total do range of 1xHP ions/cm2 to 8xlO17 ions/cm2 at various temperatures of 298"C to 676"C. The m microstructure changes by nitrogen implantation were analyzed by using TEM, XRD 뻐d A AES, cmd then wear behavior was evaluated by ball-on-disc wear testings at various loads a and sliding velocity under unlubricated condition. Nitrogen implantation produced ZrNx nitride above 4.37x1017 ions!cm2 as well as heavy d dislocations, which enhanced microhardness of the implanted surface of up to 900 Hk from 2 200 Hk of unimplanted substrate. Hardness was also found to be increased with increasing i implantation temperature and enhanced up to OOOHk at 620 "C. the wear resistance was g greatly improved with increasing total ion do않 as well as implantation temperature. The effective enhancement of wear resistance at high dose and tem야ratures is believed d due to significant hardening associated with high degree of precipitation of Zr nitrides and g generation of prismatic dislocation I$\infty$ps.infty$ps.

• 한국군사과학기술학회지
• /
• 제15권4호
• /
• pp.502-506
• /
• 2012

In order to find the structural characteristics of the thin films of group II-VI semiconductor compounds compared with those of powder materials, films were made of 4 powders of ZnS, CdS, CdSe, and CdTe(Aldrich), each with 99.99 % purity. For the ZnS/CdS multi-layers, the ZnS layer was coated over the CdS layer on an $AlO_x$ membrane, which served as a protective layer within a vacuum at the average speed of 1 ${\AA}$/sec. After studying the structures of the group II-VI semiconductor thin films by using X-ray spectroscopy, we found that the ZnS, ZnS/CdS, CdS, and CdSe films were hexagonal and exhibited some degree of preferred orientation. Also, the particles of the thin films of II-VI semiconductor compounds proved to be more homogeneous in size compared to those of the powder materials. These results were further verified through scanning electron microscopy(SEM), EDX analysis, and powder and thin film X-ray diffraction.

• 열처리공학회지
• /
• 제22권4호
• /
• pp.210-216
• /
• 2009

Stainless steel EGR cooler of diesel engine is widely used to prevent the corrosion due to the content of sulfur in diesel fuel. The strength of brazed joint between stainless steel materials is very important. It is essential to observe the spreading ratio of the filler metals under the condition of deoxidation or vacuum during heating process. In this experiment, spreading ratio was tested to find the optimum brazing condition for stainless steel using brazing filler metals of FP-613, BNi-2 and BNi-5 on sus304 and sus410. Anti-corrosion tests were also performed on the above filler metals with solution of 5% $H_2SO_4$, 65% $HNO_3$ and 5% $NH_4OH$. Consequently FP-613 has good ability for anti-corrosion with 30% of chromium content compared with other filler metals. The optimum brazing conditions are occurred at $960^{\circ}C$ for 90 min. and at $1090^{\circ}C$ for 50 min. at the same degree of vacuum, $2{\sim}3{\times}10^{-3}$ Torr.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.153-153
• /
• 2016

Polyoxymethylene copolymer (POM-C) is an attractive and widely used engineering thermoplastic across many industrial sectors owing to outstanding physical, mechanical, self-lubricating and chemical properties. In this research work, the POM-C blocks were irradiated with 1 MeV electron beam energy in five doses (100, 200, 300, 500 and 700 KGy) in vacuum condition at room temperature. The tribological and physico-chemical properties of electron beam irradiated POM-C blocks have been analyzed using Pin on disk tribometer, Raman spectroscopy, SEM-EDS, Optical microscopy, 3D Nano surface profiler system and Contact angle analyzer. Electron beam irradiation at a dose of 100 kGy resulted in a decrease of the friction coefficient and wear loss of POM-C block due to well suited cross-linking, carbonization, free radicals formation and energetic electrons-atoms collisions (physical interaction). It also shows lowest surface roughness and highest water contact angle among all unirradiated and irradiated POM-C blocks. The irradiation doses at 200, 300, 500 and 700 kGy resulted in increase of the friction coefficient as compared to unirradiated POM-C block due to severe chain scission, chemical and physical structural degradation. The electron beam irradiation transferred the wear of unirradiated POM-C block from the abrasive wear, adhesive wear and scraping to mild scraping for the 1 MeV, 100 kGy irradiated POM-C block which is concluded from SEM-EDS and Optical microscopic observations. The degree of improvement for tribological attribute relies on the electron beam irradiation condition (energy and dose rate).

• Applied Biological Chemistry
• /
• 제38권4호
• /
• pp.345-352
• /
• 1995

진공예냉처리에 의한 표고버섯의 변색, PPO활성 및 유리아미노산 함량 변화에 미치는 영향을 조사 하였다. 저장중 예냉처리한 버섯의 경우 예냉처리하지 않은 버섯에 비하여 표면색택의 변화가 억제되어짐을 알 수 있었다. 한편 저장중 Polyphenoloxidase(PPO) 의 활성은 증가하였는데 예냉처리한 버섯의 경우 예냉처리하지 않은 버섯에 비하여 PPO 활성이 낮게 나타났고 갈변이 진행되면서 그 활성이 상대적으로 더 증가한 것으로 나타났다. 그리고 포장방법에 있어서는 PVC 랩포장한 경우가 골판지 포장한 표고버섯에 비하여 변색이 억제됨을 알 수 있었고 아울러 PPO 활성도 더 낮게 나타났다. 표고버섯의 유리아미노산 함량은 수확 직후에는 2,501 mg%였으며 그 중 glutamic acid가 가장 많았고, 저장중 유리아미노산 함량은 계속 감소하는 경향을 나타내었다. 처리구별 차이를 보면 예냉처리한 버섯의 유리아미노산 함량이 예냉처리하지 않은 버섯에 비하여 전반적으로 높게 나타났으며, 저장온도와 포장방법 그리고 기간에 따라서 상당한 변화를 보였다.

• 한국수산과학회지
• /
• 제47권3호
• /
• pp.211-219
• /
• 2014

To confirm the food quality and storage stability of commercial Korean kamaboko, we experimented with the composition and textural properties using various surimis and kamaboko products. We also investigated changes in protein digestibility and lipid oxidation of vacuum packed products under chilled storage at $4{\pm}1^{\circ}C$. Among the fish meatbased surimi, vegetable mixed surimi had the lowest protein content (23.73 %), as compared to other surimi (51.9-73.6%). Siginificant (P<0.05) differences in protein, lipid content and degree of fat oxidation were noted between the fried kamaboko products of three companies. Adhesiveness, springiness, cohesiveness, gumminess, chewiness and resilience were similar in all samples, but there were notable differences in hardness and fractuability between samples. In vitro protein digestibility and trypsin indigestible substrate (TIS) were not inversely proportional in fried kamaboko products. The protein digestibility (80.30%) of steamed vegetable mixed fried kamaboko was lower than that of other fried samples (84.9-86.2%). Computed protein efficiency ratio (C-PER) of companies A and C's fried kamaboko was 2.6 but company B's was 1.9. There was no noticeable change in thiobarbituric acid reactive substances (TBARs) or protein digestibility for any of the vacuum packed fried kamaboko during 30 days of chilled storage.

• 대한족부족관절학회지
• /
• 제12권2호
• /
• pp.156-162
• /
• 2008

Purpose: Open fractures of the foot and ankle require prompt repair of the wound due to the complexity of anatomy, insufficiency of soft tissues and inadequate blood supply. Early flaps and skin grafts are used for this purpose yet general condition of the patient as well as local wound environment often precludes such treatment options. Vacuum- Assisted Closure (VAC) is recently being used in such cases. This study was done to validate the use of VAC together with silver antimicrobial dressing materials in contaminated open fracture wounds. Materials and Methods: We have selected 10 patients with Gustillo-Anderson type III open fractures of the foot & ankle treated with VAC and silver antimicrobial dressing materials from March 2007 to January 2008. The relationship between duration of treatment with wound size, contamination, and degree of soft tissue damage was analyzed. Results: The average age of patients was 36.6 years. The average amount of VAC application time was 23.4 days. Silver dressing materials were used for 16.8 days. Average wound healing time was 51.9 days. Statistically significant relationship was found between wound size, VAC application time and silver dressing material application time. No complications such as osteomyelitis were found after treatment. Conclusion: VAC technique is recently being used in open fractures with wide skin and soft tissue defects, producing good results. A wide array of dressing materials such as silver dressing is in development. We have incorporated the VAC technique together with silver dressing materials in the treatment of open fractures and achieved complication free results.

• 한국의류학회지
• /
• 제34권7호
• /
• pp.1162-1174
• /
• 2010

Excavated gold brocade, often shows signs of serious damage and contamination from environmental factors such as exposure to soil or human remains. Therefore, most of the conservation procedures are focused on the consolidation of the gold thread and on cleaning with water or organic solvents. Indiscreet cleaning using solvents could damage the gold leaf, which identifies the features of fabric. There is a need to develop cleaning protocols appropriate for relics through the careful analysis of the condition of the relics. This study finds the appropriate cleaning method for the excavated gold brocade. Four different cleaning methods, vacuum cleaning, kneaded rubber eraser cleaning, immersion wet cleaning, and absorption wet cleaning were applied to the excavated gold brocade. The degree of cleaning and damage were examined depending on the cleaning methods, changes to the physical condition (before and after cleaning) were also analyzed through the surface observation. Although immersion cleaning showed the best cleaning result, this method had a risk of damage to the gold thread. Absorption wet cleaning safely eliminated the various soluble contaminants and the rotten smell of relics. Kneaded rubber eraser was suitable for the excavated gold brocade fabric because it can be applied to selective parts, intentionally excluding some sensitive parts such as the gold thread. The vacuum cleaning method required special attention because of a possibility of suctioning off loosely attached gold leaf. Dual cleaning, the kneaded rubber eraser cleaning, followed by the absorption cleaning was the most effective method to preserve and clean excavated gold brocade.

• 한국식품조리과학회지
• /
• 제30권3호
• /
• pp.351-359
• /
• 2014

The application of persimmon for making new products was investigated by analyzing the degree of astringency removal, softness of fruit, and sensory properties of Daebong persimmons (Diospyros kaki L) treated with three different astringency removal methods of steeping in water, steeping in 1% salt solution, and vacuum packing at $40^{\circ}C$. The weight of persimmon fruit increased with increasing steeping time, but decreased with increasing vacuum packing time. The fruit steeped in $40^{\circ}C$ salt solution (1%, w/w) was not detected with soluble tannin and not developed color with ferric chloride after steeping for 9 h. A total of 12 h of steeping time was required for removing soluble tannin using other methods. The lightness (L) in color and hardness in texture decreased when storage time increased, regardless of astringency removal methods. In overall, the preference was shown with the highest score in persimmon steeped in salt solution for 9 h and 12 h that were vacuum packed at $40^{\circ}C$. In conclusion, the astringency removal condition of Daebong persimmon was good after being steeped on 1% salt solution for 9 h at $40^{\circ}C$.

• 대한치과기공학회지
• /
• 제38권4호
• /
• pp.263-272
• /
• 2016

Purpose: The purpose of this study is to measure and compare a degree of setting expansion of dental stone by time depending on the mixing methods and mixing ratios of dental stone, to compare the surface state of each specimen with the use of an optical camera with microscope, and thereby to provide a fundamental material for making dental prostheses. Methods: The test on setting expansion of dental stone is based on ISO 6873. With two different mixing ratios and three kinds of stone mixing methods, test groups were created, and a total of six types of specimens (N=30) were made. Based on the specimens, the setting expansion rate of each one was measured in each time slot of 24 hours, and the surface of the set stone was measured. Results: According to the analysis on setting expansion rate of stone, the setting expansion of the specimen that was created in the way of vacuum mixing at normal mixing ratio was 0.1944% at 120 minutes; the setting expansion of the specimen that was created in the way of vacuum mixing at the mixing ratio which was 40% higher than normal mixing ratio was 0.195% at 120 minutes; the setting expansion of the specimen that was created in the way of mixing with hands at normal mixing ratio and then removing bubbles in vacuum mixer was 0.196% at 120 minutes. Conclusion: The setting expansion rate of each dental stone specimen was significantly different with the lapse of time up to 24 hours(p<.001).