• Journal of Korean Vacuum Science & Technology
• /
• 제3권1호
• /
• pp.90-94
• /
• 1999

Field Emission display (FEDs) require enhancement in both driving methods and process techniques to improve the display image quality. However, from the point of view of manufacturing, it is difficult to find methods and techniques to realize low cost manufacturing. New and simple color phosphor screen designs were suggested with non-crossed electrode lines and full color anode panels for small area displays were demonstrated. To avoid unwanted reaction with gases produced from phosphors in a high vacuum glass container, a very thin polyimide layer was coated on the phosphor screen. Moreover, to improve the display image quality, black matrix composed of inorganic materials was fabricated. This paper describes the performance and characteristics of the new full color anode panels.

• 열처리공학회지
• /
• 제37권4호
• /
• pp.172-181
• /
• 2024

In this study, the effect of addition of Ti and Co elements on microstructural evolution and characteristics of vacuum-casted Cu-25%Cr electrical contact material was investigated. The coarse and insoluble Cr phases with an average size of 300 ㎛ in commercial Cu-25%Cr alloy were reduced to tens of micrometers in vacuum casted Cu-25%Cr-X(X=Ti, Co) alloy, which can be interpreted as result controlling coarsening and the work-frame structure of the insoluble Cr phase by the formation of intermetallic compounds such as Cr₂Ti or Cr_0.5Co_1.5Ti around the Cr phase As a result, the electrical properties such as weight loss and fusion resistance against the repeated arc generation of the electrical contact material as well as the mechanical properties were greatly improved.

• 한국진공학회지
• /
• 제16권6호
• /
• pp.405-413
• /
• 2007

진공시스템 최적화 설계를 위한 시스템 성능에 대한 설계인자 영향이 전산모사로 연구되었다. 본 연구로 상업화 전산모사기인 $VacSim^{Multi}$에 의한 진공시스템 모델링기구가 제시되었으며 진공시스템의 진공생성기구인 펌핑계 설계인자의 영향을 평가하여 향후 여러 설계인자들의 전산모사 연구 가능성이 확인되었다. $VacSim^{Multi}$의 저진공펌프 모델 전산모사 결과와 펌프사양에 의한 배기거동이 오차범위로 일치하였으며 부스터펌프의 사용이 중진공영역 응용에 효과적인 것으로 확인되었다. 또한 자체 배기능력이 없는 유확산펌프와 터보분자펌프 배기계의 최적화보조펌프 조합이 제시되었으며, 유확산 및 터보분자펌프 배기계의 시스템 공정응용특성도 확인되었다.

• 한국수소및신에너지학회논문집
• /
• 제32권6호
• /
• pp.585-591
• /
• 2021

Liquefied hydrogen have advantage which reduces the volume by about 800 times or more compared to hydrogen gas, so it is possible to increase the storage density. However, liquefied hydrogen produced by cryogenic cooling of 20 K or less at normal pressure has a problem of maximizing the insulation effect that blocks heat introduced from the outside. Representative insulation technologies include vacuum insulation and multi-layer insulation materials and in general, heat blocking is attempted by combining insulation technologies. Therefore, in this study, the pressure of the internal vacuum layer was changed to 10^-1, 10^-2, 10^-3 and 10^-4 Torr to confirm the thermal insulation performance of the vacuum jacket valve for transporting liquefied hydrogen. As a result, it was confirmed that the insulation performance improved as the degree of vacuum increased.

• 한국주조공학회지
• /
• 제27권4호
• /
• pp.153-158
• /
• 2007

Molten metal flow in vacuum die casting was characterized by a numerical analysis. The VOF method was used to simulate the filling behaviors of molten metal during filling process. The various vacuum degrees of no vacuum(760 mmHg), 650, 500, 250 and 60mmHg were artificially applied in cavity. And the filling behaviors of molten metal with the applied vacuum conditions were simulated and compared with those of experiment. The results showed that molten metal was partially filled into cavity when vacuum was applied and the filling length of molten metal in cavity was increased with increasing applied reduced pressure in cavity. Also, the simulated filling behaviors of molten metal were apparently similar to those of experiment, indicating the numerical analysis developed in this study was highly effective. Through the result of fluid flow simulation, both relation equations of filling length and filling velocity with the variation of pressure conditions in cavity were calculated respectively and the internal gas contents of casting was significantly reduced by the modification of vacuum gate system.

• 설비공학논문집
• /
• 제27권3호
• /
• pp.158-168
• /
• 2015

To create an ultra-high vacuum state at the KSTAR, the temperature of plasma facing component and vacuum vessel should be maintained at $300^{\circ}C$ and $110^{\circ}C$ respectively at a baking phase. The purpose of this research is obtaining the target baking temperatures. Experiments were performed to investigate the temperature characteristics of PFC and VV at the baking phase. Thermal network analysis was used to find heat transfer rates among PFC, VV and other components, and this analysis was verified by using the experimental data. The required heating energy of the PFC and the heating and cooling energy of the VV for the target baking temperatures were found to be 346 kW, 28 kW, and 136 kW, respectively.

• 한국축산식품학회지
• /
• 제43권3호
• /
• pp.441-453
• /
• 2023

The objective of this study was to investigate the physicochemical and microbiological characteristics of round of Hanwoo by vacuum packaging film materials, polyvinylidene chloride (PVDC) and ethylene vinyl alcohol (EVOH). The packaged beef samples were stored in refrigerated conditions (2±1℃) for 12 weeks. Physicochemical analysis with pH, surface color, thiobarbituric acid reactive substances (TBARS) values, and volatile basic nitrogen (VBN) values and microbiological analysis with aerobic plate count (APC) and metagenomic analysis of packaged beef samples were performed. The pH and surface color did not change substantially during the 12 weeks and EVOH-packaged beef tended to be lower than those of PVDC-packaged beef. PVDC- and EVOH-packaged samples showed low TBARS and VBN values below standard limits. APC did not exceed 7 Log CFU/g for both samples during storage. In metagenomic analysis, Firmicutes and Lactobacillaceae were dominant phylum and family of the PVDC- and EVOH-packaged beef. In both packaged samples, Dellaglioa algida was the dominant species during storage, with the notable difference being the presence of Lactococcus piscium. Therefore, this study provided the information on the quality of vacuum-packaged beef according to different vacuum films for long-term refrigerated storage.

• 한국지반공학회논문집
• /
• 제29권3호
• /
• pp.15-27
• /
• 2013

기존 성토재하 방식의 연약지반 개량공법에서 제기된 여러 가지 문제에 의해 진공압 재하방식의 개량공법이 개발되었으며, 국내 적용사례가 증가하고 있다. 현장에서의 침하관리시 동일한 하중을 재하하였을 경우의 진공압재하공법과 성토재하공법에 대한 침하량 비교 연구가 진행되어 왔다. 본 연구에서는 두 공법의 발생침하량에 관한 이론 및 사례 연구를 수행하였다. 그 결과 연약지반 개량을 위해 진공압이 적용되면 내향의 수평변위가 발생하고 동일한 하중재하 대비 침하량이 감소하였다. Hooke의 탄성이론을 바탕으로 한 경우 0.54~0.67, 국내 설계기준에서는 0.50~0.75, 과거 국내 시공사례를 바탕으로 한 경우 0.91, 실내시험을 바탕으로 한 경우 0.81, 탄성론과 체적압축계수법을 바탕으로 한 경우 0.75, 최근 국내 대심도 시공 사례의 경우 0.77~0.93의 범위를 보이는 것으로 나타났다.

• Journal of the Korean Wood Science and Technology
• /
• 제24권2호
• /
• pp.46-54
• /
• 1996

This study was carried out to investigate the vacuum drying characteristics of 50mm- and 75mm- thick tree disks of some domestic softwoods for substituting the conventional hardwoods as the materials for wood crafts. Though the elapsed drying times from green to in-use moisture content(MC) were largely shortened by vacuum drying, the tree disks treated by EWS couldn't be dried to in-use MC, and so sapwood stains also were occurred severely. We suggest EWS treatment is undesirable for the species with very high sapwood portion or vacuum drying with hot water circulation heating system. Heart checks were slight, but sapwood checks, which have never been trouble in drying process of tree disks, were severe. For the reasonable explanation it is suggested MC differences between sapwood and heartwood were large and most of tree disks had already no barks before drying test. Ginkgo was vacuum-dried with very slight drying defects such as heart checks, sapwood checks. V-cracks and sapwood stains. In Korean red pine and pitch pine V-cracks were severely occurred. And it was found the special feature that most of these defected tree disks contained several V-cracks within one tree disk. It can be considered as the causes that the region of sapwood was defected by the several checks at the early drying stage because of the steep MC gradient along the radial direction, and then at the later drying stage the drying stresses due to differential shrinkage were concentrated on these brittle spots.

• 한국유체기계학회 논문집
• /
• 제20권1호
• /
• pp.5-14
• /
• 2017

A fan-motor assembly in a vacuum cleaner is analyzed through system-level analysis method. This system consisted of three components, a fan, motor, and the flow resistance of the motor, or of the vacuum cleaner. System-level analysis method is characterized by the combination of torque matching at a constant throttling condition between the fan and the motor and the pressure drop at a constant flow rate due to the flow resistance of the motor, or of the vacuum cleaner. The performance characteristics of the fan-motor assembly and the vacuum cleaner system could be predicted over the whole range of operation, based on the characteristics of each component. The predicted performance of the vacuum cleaner system through system-level analysis agreed well with the experimental results within 4.5% difference of pressure and 6% difference of the efficiency. The effect of flow resistance of a motor is investigated and it is found that the efficiency decrease of fan-motor assembly at the constant flow rate due to the flow resistance of a motor is determined by the flow resistance ratio(FRR), which is defined as a ratio of flow resistance of motor and the flow resistance of a constant throttling condition of a given point. The fan-motor assembly(S2 model) was modified to reduce the FRR from 9.0% to 2.4% and the experimental result shows that the efficiency of S2 model was improved by about 3% at best efficiency point.