• Journal of Radiation Protection and Research
• /
• 제17권1호
• /
• pp.43-56
• /
• 1992

입자 수송방정식에서 각변수(angular variable)를 각분할근사법으로 해석할 때 나타나는 이상 현상인 ray effect를 치유할 수 있는 방법의 하나로써, 유한 분할각(discrete angle quadrature)을 입자속의 공간적 분포로써 조종하는 방법인 각분할요소법 (discrete elements method)을 근거로 하여 2차원 직각좌표계에서의 입자 수송 해석 프로그램(TWODET)을 개발하였다. 평판형 등방적 고정선원이 존재하는 균질 사각형 흡수체에 대해 TWODET로 해석한 결과, 각 요소가 K-2, L인 경우에도 DOT 4.3(S-10)에서보다 ray effect 치유에 더 효과가 있음을 확인하였다. 그러나, 계산시간은 기존의 각분할법에서보다 약 4배 더 소비되었다. 선원에서 바로 진공(vacuum boundary)으로 떨어지는 구조의 경우, TWODET의 결과에서도 심한 왜곡을 보이고 있는데 선원과 바로 이웃한 진공간의 급격한 불연속성으로 인함으로 추측된다 고정선원이 있는 매질에 강한 흡수체가 추가된 구조의 경우에서도 TWODET(K-3, L-4)로 DOT 4.3(S-10)보다 좋은 결과를 보였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1998년도 제16회 학술발표회 논문개요집
• /
• pp.106-106
• /
• 1998

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제37회 하계학술대회 초록집
• /
• pp.336-336
• /
• 2009

• 한국진공학회지
• /
• 제12권S1호
• /
• pp.52-55
• /
• 2003

GaAs/AlGaAs quantum-wire (QWR) gain-coupled distributed-feedback (GC-DFB) lasers are fabricated and characterized Constant metalorganic chemical vapor deposition (MOCVD) growth is used to avoid grating overgrowth during the fabrication of DFB structures. Numerical calculation shows large gain anisotropy by optical feedback along the DFB directions near Bragg wavelength. DFB lasing via QWR active gratings is also experimentally achieved.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.1236-1240
• /
• 2004

Thermal vacuum test for satellites should be performed before launch to verify the feasibility of satellites' operation in a harsh space environment which is represented as an extremely cold temperature and vacuum condition. A large space simulator(${\Phi}8m{\times}L10m$) has been demanded to accomplish the thermal vacuum test for the huge satellites designed in compliance with the national space program of Korea. In this paper, the design and calculation of thermal shroud which is the core part of large space simulator were discussed. The characteristics of the large space simulator being constructed at Korea Aerospace Research Institute(KARI) were depicted.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.18-20
• /
• 2004

This paper formulates the principle of the permanent magnetic actuator (PMA) and its dynamic characteristic calculation applicable to High Voltage Vacuum Interrupter (38kV/31.5kA). The new type of PMA is need to apply to High Voltage Vacuum Interrupter for large stroke length and contact force at interrupter. Consequently this paper describes the ideal matching of the new type of PMA mechanism with the characteristics required to operate successfully, reliably and efficiently a High Voltage Vacuum Interrupter.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.151.2-151.2
• /
• 2014

Broadband impedances for the 3-GeV pohang light source-II (PLS-II) storage ring have been numerically estimated using a full three dimensional finite-difference time-domain code, CST particle studio. The total broadband impedance of all the vacuum components was estimated as 0.256 ohm, which is a small fraction of the total machine impedance budget.

• Journal of Electrical Engineering and Technology
• /
• 제8권4호
• /
• pp.813-823
• /
• 2013

On-line monitoring system is important for high voltage vacuum circuit breakers (HVCBs) in operation condition assessment and fault diagnosis. A distributed multilayer system with client/server architecture is developed on rated voltage 10kV HVCB with spring operating mechanism. It can collect data when HVCB switches, calculate the necessary parameters, show the operation conditions and provide abundant information for fault diagnosis. Ensemble empirical mode decomposition (EEMD) is used to detect the singular point which is regarded as the contact moment. This method has been applied to on-line monitoring system successfully and its satisfactory effect has been proved through experiments. SVM and FCM are both effective methods for fault diagnosis. A combinative algorithm is designed to judge the faults of HVCB's operating mechanism. The system's precision and stability are confirmed by field tests.

• 한국진공학회지
• /
• 제10권3호
• /
• pp.341-349
• /
• 2001

수평형 MOCVD (유기금속 화학기상법) 제조공정에서 유체유동, 열전달 및 화학종의 국소적 질량분율을 고찰하기 위한 수치계산을 수행하였다. 수송가스로 작용하는 수소가스와 TMG및 암모니아의 농도분포를 예측함으로서 혼합과정을 분석하고 필름성장의 균일성을 예측하였다. 농도분포에 미치는 입구크기, 위치, 질량유량 및 벽면의 경사각도의 영향이 검토되었다. 계산결과로서 무차원 대류 열전달 계수 Nu에 의해 반응물의 농도분포를 정성적으로 예측할 수 있었으며, 균일한 필름성장을 위한 최적 질량유량, 벽면 경사도 및 입구조건이 제시되었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.169-169
• /
• 2014

Interfacial electronic structure of bathocuproine and Al was investigated using in-situ photoemission spectroscopy and density functional theory (DFT) calculations. Bathocuproine is used for exciton blocking and electron transport material in organic photovoltaics and Al is typical cathode material. When thin thickness of Al was thermally evaporated on BCP, gap states were observed by ultraviolet photoemission spectroscopy. The closest gap state yielded below 0.3 eV from Fermi level. By x-ray photoemission spectroscopy, interaction of Al with nitrogen of BCP was observed. To understand the origin of gap states, DFT calculation was carried out and gap states was verified with successive calculation of interaction of Al and nitrogen of BCP. Furthermore, emergency of another state above Fermi level was observed. Remarkable reduction of electron injection barrier between Al and BCP, therefore, is possible.