• 대한기계학회논문집A
• /
• 제26권5호
• /
• pp.924-931
• /
• 2002

Vacuum interrupters in order to be used in various switch-gear components such as circuit breakers, distribution switches, contactors, etc. spread the arc uniformly over the surface of the contacts. The electrodes of vacuum interrupters are made of sinter-forged Cu-Cr materials for good electrical and mechanical characteristics. Since the closing velocity is 1-2m/s and impact deformation of the electrode depends on the strain rate at that velocity, the dynamic behavior of the sinter-forged Cu-Cr is a key to investigate the impact characteristics of the electrodes. The dynamic response of the material at the high strain rate is obtained from the split Hopkinson pressure bar test using disc-type specimens. Experimental results from both quasi-static and dynamic compressive tests are Interpolated to construct the Johnson-Cook model as the constitutive relation that should be applied to simulation of the dynamic behavior of the electrodes. The impact characteristics of a vacuum interrupter are investigated with computer simulations by changing the value of five parameters such as the initial velocity of a movable electrode, the added mass of a movable electrode, the wipe spring constant, initial offset of a wipe spring and the virtual fixed spring constant.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 C
• /
• pp.1603-1605
• /
• 2001

Eight 300kJ modularized capacitor-banks have been constructed. These modules have been installed and assembled to make a 2.4MJ pulse power system (PPS). This 2.4MJ PPS was developed to be used as a driver of an electrothermal-chemical (ETC) gun. Each capacitor bank has six 22kV, 50kJ capacitors connected in parallel. A triggered vacuum switch (TVS-43) was adopted as a main pulse power-closing switch in each module. The module also contains a crowbar circuit made of three high-voltage diode-stacks, a multi-tap inductor and an energy-dumping resistor. Various current shapes have been formed by a sequential firing of multiple capacitor banks. Resistive dummy load has been used and various combinations of experimental parameters, such as charging voltage, trigger time and inductance, were tested to make flexible current shapes.

• 대한기계학회논문집A
• /
• 제30권6호
• /
• pp.670-677
• /
• 2006

Vacuum interrupters are used in various switch-gear components such as circuit breakers, distribution switches, contactors. The electrodes of a vacuum interrupter are manufactured of sinter-forged Cu-Cr material for good electrical and mechanical characteristics. Since the closing velocity is 1-2m/s and impact deformation of the electrode depends on the strain-rate at the given velocity, the dynamic material property of the sinter-forged Cu-Cr alloy is important to design the vacuum interrupter reliably and to identify the impact characteristics of a vacuum interrupter accurately. This paper is concerned with the dynamic material properties of sinter-forged Cu-Cr alloy for various strain rates. The amount of chrome is varied from 10 wt% to 30 wt% in order to investigate the influence of the chrome content on the dynamic material property. The high speed tensile test machine is utilized in order to identify the dynamic property of the Cu-Cr alloy at the intermediate strain-rate and the split Hopkinson pressure bar is used at the high strain-rate. Experimental results from both the quasi-static and the high strain-rate up to the 5000/sec are interpolated with respect to the amount of chrome in order to construct the Johnson-Cook and the modified Johnson-Cook model as the constitutive relation that should be applied to numerical simulation of the impact behavior of electrodes.

• Journal of the Korean Wood Science and Technology
• /
• 제29권4호
• /
• pp.25-32
• /
• 2001

관행열기건조방식으로는 결함없이 건조가 불가능한 목공예용 단척 통나무를 건조할 수 있는 마이크로파-진공 건조기를 개발하였다. 이 건조기는 크게 출력 1.5 kW와 주파수 2,450 MHz인 마그네트론 3개와 600리터/분 진공펌프, 100 kg 로드셀, 그리고 폭과 높이가 각각 580 mm, 길이가 1,360 mm인 cavity로 구성되어 있다. 목재건조속도는 마그네트론 주사시간과 정지시간의 비율에 따라 결정되도록 되어 있다. 건조기의 성능을 실험하기 위해 직경 12.5~25 cm, 길이 25~50 cm의 리기다소나무, 은사시나무, 그리고 자작나무 통나무를 건조하였다. 건조결과 약간의 건조결함이 있었으나 비교적 양호하였으며 매우 짧은 시간에 건조할 수 있었다. 또 오리나무와 물푸레나무 생재로 된 제기용 선반가공목은 함수율 4%까지 결함없이 건조할 수 있었다. 통나무길이에 따른 마이크로파-진공 건조의 속도도 은사시나무를 이용하여 비교하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.558-560
• /
• 2004

Studies on the controlled switching method have been done to prevent the power system surges which cause the insulation deterioration and electro magnetic compatibility (EMC) problems during closing and opening of a circuit breaker. The controlled switching method controls the closing and tripping time in coincidence with the voltage or current to suppress switching surge. It is used to switch condenser bank, no load transformer, and shunt reactor. In this study, basic concept of the controlled switching is introduced, and also the test is performed to find parameters of the controlled switching in a 24kV vacuum circuit. And then, the control device hardware using TMS320C31 DSP has been designed and manufactured. It has been found that the application of IT technology to a circuit breaker is very effective to depress the switching surge.

• 한국진공학회지
• /
• 제12권1호
• /
• pp.46-50
• /
• 2003

외부전극 형광램프 12개를 평면에 배치하여 제작한 대각길이 17인치 직하형 백라이트의 구형파 구동에 의한 휘도와 효율 특성을 조사하였다. 구동 전압 1-2 kV와 주파수 40-80 kHz에 대하여 백라이트 패널의 휘도가 5,000-10,000 cd/$\textrm m^2$ 일 때 효율 65-70 1m/W를 얻었다. 구동 주파수가 클수록, 고휘도를 얻고 구동 전압이 낮아진다. 구동 주파수가 80 kHz 이상의 주파수에서는 백라이트의 휘도가 불안정하고, 면전체 휘도의 균일성을 얻지 못한다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1999년도 제17회 학술발표회 논문개요집
• /
• pp.188-188
• /
• 1999

The embedded atom method (EAM) of Daw and Baskes as a semiempirical method, has been successfully applied to the fcc or nearly filled d-band transition metals due to its computational feasibility and its methodological simplicity. Then Baskes modified the EAM (MEAM) to include directional bonding and applied it to metals, semiconductors, and diatomic gases, all of which have different types of bondings. Here, we present a detailed study of the energetics of adsorption on the fcc(111) surfaces and binary system within the framework of MEAM. In adsorption on fcc(111) surfaces, there are two energetically favored sites, so called, fcc site and hcp site, which may trigger stacking fault in the growth of films and might switch growth mode between 3D growth and layer by layer growth. We scrutinized the role of the hcp sites, which would offer dynamic growth pathways although the dynamics are not yet clear within the limited experimental resolution. Featuring these transient motions in the atomic level should contribute to the understanding the growth mechanisms on fcc(111) surface. And we also applied MEAM for initial stage energetics at the Cr coverage of sub- monolayer on W(110). We hope that recently observed extraordinary growth behavior at the Cr coverage of 0.7 monolayer, self- organized nano-scale lines, can be resolved in this MEAM binary system calculation.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.386-386
• /
• 2012

We studied a bilateral switching device for spin transfer torque (STT-MRAM) based on 3D device simulation. Metal/P/N+or Metal/N/P+ junction device with $30{\times}30nm2$ area which is composed of one side schottky junction at Metal/P/N+ and Metal/N/P+ provides sufficient bidirectional current flow to write data by a drain induced barrier lowering (DIBL). In this work, Junction device confirmed that write current is more than 30 uA at 2 V, It is also has high on-off ratio over 105 under read operation. Junction device has good process feasibility because metal material of junction device could have been replaced by bottom layer of MTJ. Therefore, additional process to fabricate two outer terminals is not need. so, it provides simple fabrication procedures. it is expected that Metal/P/N+ or Metal/N/P+ structure with one side schottky junction will be a promising switch device for beyond 30 nm STT-MRAM.

• 한국진공학회지
• /
• 제17권4호
• /
• pp.253-261
• /
• 2008

Programmable metalization cell (PMC) memory 소자로도 명명되는 고체 전해질 메모리 소자는 비휘발성, 고속 및 높은 ON/OFF 저항비 등을 갖고 있기 때문에, 차세대 비휘발성 메모리로서 각광받고 있는 소자 중의 하나이다. 본 논문에서는 고체 전해질 메모리 소자의 동작 원리를 먼저 소개하고자 한다. 또한, 메모리향 소자 개발을 진행 중인 미국 코지키 교수 그룹, 비메모리향 소자 개발을 진행 중인 일본 NEC 그룹 등의 해외 연구진과, Te 계열의 칼코게나이드 합금을 채택하여 소자를 제작한 한국전자통신연구원 및 충남대학교 등의 국내 연구진의 연구 성과를 소개하고자 한다.

• 한국진공학회지
• /
• 제8권3A호
• /
• pp.194-200
• /
• 1999

In this paper studied was the piezoelectric properties of the $\beta$-PVDF organic thin films prepared by physical vapour deposition method. The molecular orientation of organic thin films was controlled by the application of an electric field and variation of substrate temperature during the evaporation process. Optimum conditions of manufacturing $\beta$-PVDF organic thin film by physical vapor deposition method is to keep at the substrate temperature of $80^{\circ}C$, at the applied electric field of 142.8 kV/cm. The voltage output coefficient increased from 1.39 to 7.04V increasing the force moment.