• Structural Engineering and Mechanics
• /
• 제10권3호
• /
• pp.245-262
• /
• 2000

The objective of this study is to analyze the deformational characteristics of a high-vacuum insulation panel that is evacuated to eliminate significant gas-phase conductance through its thickness. The panel is composed of a metal envelope and low thermal conductance spacers. The problem is very challenging because several nonlinearities are involved concurrently. Not only are various finite element models such as triangular, rectangular, beam and circular plate models used to simulate the panel, but also several finite element programs are used to solve the problem based on the characteristics of the finite element model. The numerical results indicate that the effect of the diameter of the spacer on the vertical deformation of the plate panel is negligibly small. The parameter that mainly influences the maximum sag is the spacing between the spacers. The maximum vertical deformation of the panel can be predicted for a practical range of the spacing between the spacers and the thickness of the plate. Compared with the numerical results obtained by the finite element models and the experimental tests, they have a good agreement. The results are represented in both tabular and graphical forms. In order to make the results useful, a curve fitting technique has been applied to predict the maximum deformation of the panel with various parameters. Moreover, the panel was suggested to be a "smart" structure based on thermal effect.

• Smart Structures and Systems
• /
• 제5권4호
• /
• pp.317-328
• /
• 2009

Current maintenance operations and integrity checks on a wide array of structures require personnel entry into normally-inaccessible or hazardous areas to perform necessary nondestructive inspections. To gain access for these inspections, structure must be disassembled and removed or personnel must be transported to remote locations. The use of in-situ sensors, coupled with remote interrogation, can be employed to overcome a myriad of inspection impediments stemming from accessibility limitations, complex geometries, the location and depth of hidden damage, and the isolated location of the structure. Furthermore, prevention of unexpected flaw growth and structural failure could be improved if on-board health monitoring systems were used to more regularly assess structural integrity. A research program has been completed to develop and validate Comparative Vacuum Monitoring (CVM) Sensors for surface crack detection. Statistical methods using one-sided tolerance intervals were employed to derive Probability of Detection (POD) levels for a wide array of application scenarios. Multi-year field tests were also conducted to study the deployment and long-term operation of CVM sensors on aircraft. This paper presents the quantitative crack detection capabilities of the CVM sensor, its performance in actual flight environments, and the prospects for structural health monitoring applications on aircraft and other civil structures.

• 한국항행학회논문지
• /
• 제17권5호
• /
• pp.574-580
• /
• 2013

본 논문에서는 박막코팅기술의 공정은 고경도 박막과 질화층의 접합력을 높이기 위하여 적용하였다. 이 박막코팅기술은 프레스 금형에 사용되는 경도와 인성을 얻을 수 있는 복합 박막을 형성했다. 이러한 박막 코팅 생산 기술은 물리증착방법을 이용하여 진공 챔버의 진공도를 증가하고, 건파워의 투사율을 향상시켰다. 티타늄합금 타겟은 각종 정밀가공 부품에 복합박막코팅기술 개발을 통하여 성능과 표면재질을 개선하였다.

• Smart Structures and Systems
• /
• 제24권6호
• /
• pp.759-768
• /
• 2019

In nuclear fusion reactors, the key structural component (i.e., the plasma-facing component) undergoes high heat flux cyclic loading. To ensure the safety of fusion reactors, an experimental study on the temperature-induced creep of stainless steel under heat flux cyclic loading was performed in the present work. The strains were measured using a stereo digital image correlation technique (3D-DIC). The influence of the heat haze was eliminated, owing to the use of a vacuum environment. The specimen underwent heat flux cycles ($500^{\circ}C-1000^{\circ}C$) with different mechanical preloads (0 kN, 10 kN, 30 kN, and 50 kN). The results revealed that, for a relatively large preload (for example, 50 kN), a single temperature cycle can induce a residual strain of up to $15000{\mu}{\varepsilon}$.

• 한국식품과학회지
• /
• 제18권2호
• /
• pp.93-97
• /
• 1986

호화 옥분을 결합제로 첨가하고 진공탈기 압출법으로 단백질변성온도보다 저온에서 보리국수를 제조하였다. 면대 안의 기포제거로 습윤국수의 강도가 높아 졌으며건조국수의 조리안정성도 높아 졌다. 호화 옥분 첨가는 습윤국수 면대 강도 확보에 필수적이었는데 첨가수준이 높아지면 국물탁도가 높아지므로 20% 첨가가 적정수준이었으며 반죽액은 3% 대두단백질용액으로 하면 국수 품질개선에 효과가 있었다.

• 한국가구학회지
• /
• 제12권2호
• /
• pp.29-38
• /
• 2001

This study was carried out to develope a new process of flattening bamboo pieces(3 months old) by two steps of utilizing microwave oven and hot press. Internode bamboo pieces were impregnated with low molecular weight phenol formaldehyde resin (PF) under vacuum of 76 cmHg, heated in a household microwave oven in 1 minute, pressed on the temperature of $145^{\circ}C$ by the hot press for 10 minute, and then cooled by the cold press in their flattened form. The physical and mechanical . Properties of compressed flattened bamboo were as follows: 1) PF1(Mw:427) and PF2(Mw:246) sol. met the success of flattening of internode bamboo pieces in both of P. bambusoides and P. nigra var. PF2 showed the more plasticity to flatten the bamboo than PFI. The PF2 sol. with low molecular weight(Mw:246) gave the more weight gain than that of PF1 in the equal concentration. PF1 of 5% (NVC) and PF2 of 10% (NVC) sol. gave the best result for physical and mechanical properties and from a economical view point. 2) The PFI of 5% (NVC) sol. with low molecular weight decreased the water absorption of 62-63% and increased the bending strength (MaR) of 80-90%, compression strength of 43-54%. 3) The PF2 of 10% (NVC) sol. with low molecular weight decreased the water absorption of 56-57% and increased the bending strength (MaR) of 64-86%, compression strength of 39-63%.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 하계학술대회 논문집
• /
• pp.259-262
• /
• 1991

Carbon fiber/Aluminum composites were fabricated vacuum hot press method with condition of $10^{-3}$ torr, 100MPa, $600^{\circ}C$, 30min. Microstructure, mechanical properties, electrical properties and thermal properties of CF/Al composites were studied.

• Journal of the Korean Wood Science and Technology
• /
• 제43권6호
• /
• pp.792-797
• /
• 2015

진공가압 수지함침 처리에 의한 목재의 휨강도, 경도 및 내마모성 향상을 위하여 침엽수 3수종에 수용성 멜라민 수지를 수지농도와 처리시간별로 진공가압 처리한 후 수지함침 열압축목재(compreg)를 제조한 다음 물성을 검토하였다. 또한 같은 수종에 수용성 난연제를 도포처리하는 방법과 진공가압 후 열압처리 방법으로 제조한 다음 난연성 향상정도를 측정하였다. 수지의 농도가 높을수록 휨강도 및 브리넬 경도는 증가하였고 내마모성은 향상되었으나, 처리시간과는 일정한 경향이 없었다. 난연성은 도포시험편 보다 진공가압처리 시험편이 총 방출열량이 감소하여 진공가압처리에 의한 난연성 개선 방법이 효과가 있었다.

• Membrane and Water Treatment
• /
• 제6권3호
• /
• pp.237-249
• /
• 2015

In this study we investigate a laboratory scale vacuum membrane distillation system to produce pure water from model oil in water emulsion. Experimental determination of liquid entry pressure (LEP) of a commercial Durapore$^{TM}$ GVPH flat sheet membrane using model emulsions in various oil concentrations has been carried out. Two different methods of liquid entry pressure determination - a frequently used, so-called static and a novel dynamic method - have been investigated. In case of static method, LEP value was found to be 2.3 bar. No significant effect of oil content on LEP was detected up to 3200 ppm. In contrast, LEP values determined with dynamic method showed strong dependence on the oil concentration of the feed and decreased from 2.0 bar to a spontaneous wetting at 0.2 bar in the range 0-250 ppm, respectively. Vacuum membrane distillation tests were also performed. The separation performance is evaluated in terms of flux behavior, total organic carbon removal and droplet size distribution of the feed and final retentate. No significant effect of oil content on the flux was found ($5.05{\pm}0.31kgm^{-2}h^{-1}$) up to 250 ppm, where a spontaneous wetting occurred. High separation performance was achieved along with the increasing oil concentration between 93.4-97.0%.

• Composites Research
• /
• 제27권6호
• /
• pp.254-259
• /
• 2014

고품질의 복합재료를 생산할 수 있는 Autoclave 공정의 단점인 긴 성형공정과 높은 생산비용을 보완하여 본 연구에서는 Autoclave 공정을 대체할 수 있는 Pressure press 공정과 장치를 개발하였다. Autoclave 공정의 가장 큰 특징이라고 할 수 있는 진공, 가압 공정을 금형 내부에 공간 설계를 통해 가능하게 하였고, 금형 내부 공기압이 소실되지 않도록 유압 press를 이용하여 가압장치를 설계하고 금형을 밀폐하였다. 가압장치에서는 가열과 냉각이 가능하게 하여 금형에 직접 온도를 전달할 수 있게 하였다. Autoclave 공정에 비해 내부 공간이 축소되어 가열 시간과 공기압 충전시간이 단축되었고 설비규모가 축소되어 초기설치비가 절감되었다. 가열방식에 따른 공정의 분석을 위해 V 자 형태의 금형을 제작하여 spring-back 현상 발생여부와 정도를 측정하고 Autoclave 공정과 비교하였으며, 복합재료 성형 시 금형의 온도를 측정하여 소재에 전달되는 각 부분의 온도를 관찰하였다. 그리고 같은 조건에서 Autoclave 공정과 Pressure press 공정으로 성형된 복합재료의 섬유 체적율을 비교하여 기계적 특성을 예측하였다.