• Composites Research
• /
• v.15 no.1
• /
• pp.21-31
• /
• 2002

To overcome the disadvantages of conventional excavation technology various trenchless (or excavation free, or no-dig) repair-reinforcement technologies have been developed and tried. But trenchless technologies so far developed have some drawbacks such as high cost and inconvenience of operation. In this study, a repairing-reinforcing process for underground pipes with glass fiber fabric polymer composites using VARTM (Vacuum Assisted Resin Transfer Molding) has been developed. The developed process requires shorter operation time and lower cost with smaller and simpler operating equipments than those of the conventional trenchless technologies. For the reliable operation of the developed method, a simple method to apply pressure and vacuum to the reinforcement was devised and flexible mold technology was tried. Also, resin filling and cure status during RTM process were monitored with a commercial dielectrometry cure monitoring system, LACOMCURE. From the investigation, it has been found that the developed repairing-reinforcing technology with appropriate process variables and on-line cure monitoring has many advantages over conventional methods.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.238-239
• /
• 2010

Dimethyl sulphoxide (DMSO) is one of the widely-used secondary dopants in order to enhance the conductivity of poly(3, 4-ethylenedioxy-thiophene):poly(styrene sulfonate) (PEDOT:PSS) film. In this work, we investigated the effect of DMSO doping in to PEDOT:PSS on the electrical performance of the bulk heterojunction photovoltaics consisting of poly(3-hexylthiophene-2, 5-diyl) and phenyl-C61-butyric acid methyl ester. Correlation between the power conversion efficiency and the mechanism of improving conductivity, surface morphology, and contact properties was examined. The PEDOT:PSS films, which contain different concentration of DMSO, have been prepared and annealed at different annealing temperatures. The mixture of DMSO and PEDOT:PSS was prepared with a ratio of 1%, 5%, 15%, 25%, 35%, 45%, 55% by volume of DMSO, respectively. The DMSO-contained PEDOT:PSS solutions were stirred for 1hr at $40^{\circ}C$, then spin-coated on the ultra-sonicated glass. The spin-coated films were baked for 10min at $65^{\circ}C$, $85^{\circ}C$, and $120^{\circ}C$ in air. In order to investigate the electrical performance, P3HT:PCBM blended film was deposited with thickness of 150nm on DMSO-doped PEDOT:PSS layer. After depositing 100nm of Al, the device was post-annealed for 30min at $120^{\circ}C$ in vacuum. The fabricated cells, in this study, have been characterized by using several techniques such as UV-Visible spectrum, 4-point probe, J-V characteristics, and atomic force microscopy (AFM). The power conversion efficiency (AM 1.5G conditions) was increased from 0.91% to 2.35% by tuning DMSO doping ratio and annealing temperature. It is believed that the improved power conversion efficiency of the photovoltaics is attributed to the increased conductivity, leading to increasing short-circuit current in DMSO-doped PEDOT:PSS layer.

• Journal of the East Asian Society of Dietary Life
• /
• v.19 no.6
• /
• pp.950-957
• /
• 2009

Mustard Leaf Kimchi (MLK) is a traditional fermented Korean vegetable food. This study was conducted to investigate the effects of part vacuum treatment on MLK packed in a glass bottle during fermentation. There have been a few previous studies that examined the chemical and microbial changes during MLK fermentation. However, the major object of this study was to investigate the antioxidative activities of vacuum treated MLK. In this study, the antioxidative activity of vacuum treated mustard leaf Kimchi (VM) and control mustard leaf Kimchi (CM) were examined. VM and CM were fermented at $5^{\circ}C$ for 8 weeks. A model system was designed to evaluate the antioxidative activity of crude chlorophylls and carotenoids (CCC) extracts from Mustard leaf Kimchi. The oxidative reaction of the linoleic acid mixture system at $30^{\circ}C$ in the dark was quantified determining the peroxide value and conjugated dienoic acid content. The effect of the CCC extracts on lipid peroxidation in a rat liver homogenate was examined. Formation of lipid peroxides was estimated by the TBA value, and the CCC extracts were found to inhibit the TBA value. Chlorophyll a and b, and carotenoids, Which are the major components in the CCC extracts of Kimchi were isolated on a DEAE-sepharose CL-6B and Sepharose CL-6B column and TLC. The effects of chlorophyll a and b, caroteins on linoleic acid autoxidation were measured by determining the peroxide value. In addition, their effects on free radical scavenging were investigated by DPPH. In this assay, chlorophyll a showed the greatest antioxidative activity followed by chlorophyll b, and carotenoids. MLK contains a sufficient content of chlorophyll a and b, and carotenoid which have strong antioxidative activities.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.5
• /
• pp.489-494
• /
• 2004

Long Period Gratings (LPG) is currently receiving considerable attention because of their consistent measuring results fur pressure, temperature, strain and flow. LPG is easier to prepare and has a high sensitivity compared with Fiber Bragg Gratings (FBG). In addition, this kind of optical fiber sensors could be used for implementations in various structures. In this paper, LPG was used to monitor in situ the resin flow and the curing process in VARTM (Vacuum Assisted Resin Transfer. Molding). In order to demonstrate the effectiveness of the method, FBG is inserted into the glass mat to monitor the resin flow using optical spectrum analyzer (OSA). The curing reactions in VARTM are also observed using the same method. From the results, the attenuation wavelength shift and the loss change of attenuation band can be obtained from the status of the RTM (Resin Transfer Molding) sample owing to the internal variations of the .effective index, temperature, and pressure. It is shown that the proposed LPG is more effective in monitoring the curing reaction than FBG.

• Journal of the Korean Vacuum Society
• /
• v.6 no.2
• /
• pp.114-121
• /
• 1997

The transparent conductiong thin films of tin oxides were prepared on pyrex glass substrates by the pulse laser deposition. In the atmospheres of vacuum, O2, and $Sn(CH_3)_4$ a polycrystalline $SnO_2$ target was ablated by Nd-YAG laser beam to deposit thin films on the substrates at room temperature, and as-deposited films were subsequently heat-treated in the air for 2 h at 230, 420 and $610^{\circ}C$, respectively. The characteristics of the thin films were examined by UV-VIS-NIR spectrometry and X-ray diffractometry, and the electrical properties were measured by four-point probe method along with film thickness monitored by the stylus method. It was observed that in the presence of $Sn(CH_3)_4$, $SnO_2$ phases were grown even at room temperature. This suggests that the microplasma producted during the laser ablation plays an important role in the dissociaation of precursor molecules.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.657-659
• /
• 2004

Trivalent cerium ($Ce^{3+}$) activated yttrium aluminum garnet ($Y_3Al_5O_{12}$, YAG) phosphor thin films were deposited on quartz glass substrates by rf magnetron sputtering. The effects of sputtering parameters and annealing condition on the luminescent properties were investigated. The sputtering parameters were $O_2$/Ar gas ratio, rf power, and deposition time. The films were annealed at 1200 $^{\circ}C$ for 5 hours in $N_2+$vacuum atmosphere. Polycrystalline YAG:Ce thin film phosphor could be obtained with a gas ratio of $O_2$/(Ar+$O_2$)=0.5 after post-annealing. PL spectra excited at 450 nm showed a yellow single band at 550 nm.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.04a
• /
• pp.25-26
• /
• 2008

In this paper, the white organic light-emitting diode(OLED)was fabricated using the DPVBi of blue emitting material and a rubrene of orange color of fluorescent dye by vacuum evaporation processes. The device structure of OLED was Glass/ITO/2T-NATA(15nm)/NPB(3nm)/DPVBi(3nm)/DPVBi rubrene[2%](10nm)/DPVBi(25nm)/$Alq_3$ or New-ETL(60nm) /LiF(0.5nm)/ Al(100nm). The device with the $Alq_3$, layer shows orange color, and the luminance of 1000cd/$m^2$ at an applied voltage of 10.4V. On the other hand, the New-En layer results in white color, CIE coordinates of (0.327, 0.323), and the lowered driving voltage of 5V for achieving the same luminance value.

• Journal of the Korean Society for Precision Engineering
• /
• v.24 no.11
• /
• pp.108-115
• /
• 2007

We have designed a high transmission C-shaped aperture using finite differential time domain (FDTD) technique. The C-shaped aperture was fabricated in the aluminum thin film on a glass substrate using a focused ion beam (FIB) milling. Nano-size patterning was demonstrated with a vacuum contact device to keep tight contact between the Al mask and the photoresist. Using 405 nm laser, we recorded a 50 nm-size dot pattern on the photoresist with the aperture and analyzed the spot size dependent on the dose illuminated on the aperture.

• Transactions of Materials Processing
• /
• v.23 no.8
• /
• pp.507-512
• /
• 2014

The objective of the current investigation is to establish techniques in micro pattern forming operations of polymeric circular tubes by using hydrostatic pressing. This method was developed and successfully applied to the micro pattern forming on polymeric plates. The key idea of the new technique is to pressurize multiple vacuum-packed substrate-mold stacks above the glass transition temperature of the polymeric substrates. The new process is thought to be a promising micro-pattern fabrication technique for two reasons; first, (hydro-) isostatic pressing ensures a uniform micro-pattern replicating condition regardless of the substrate area and thickness. Second, multiple curved substrates can be patterned at the same time. With the prototype forming machine for the new process, micro prismatic array patterns, 25um in height and 90 degrees in apex angle, were successfully made on the PMMA circular tubes with diameters of 5~40mm. These results show that this process can be also used in the micro pattern forming process on curved plates such as circular tube.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.1440-1442
• /
• 2005

We have fabricated vertical type organic thin film transistors (OTFTs) using organic semiconductor materials such as F16CuPc, NTCDA, PTCDI C-8 and C60. The layers of OTFT were fabricated by vacuum evaporation technique and spin casting method onto the Indium Tin Oxide (ITO) coated glass. I-V characteristics and on-off ratios of the fabricated OTFTs were investigated. In addition, we have fabricated light emitting transistor using MEH-PPV and then investigated EL electroluminescent properties.