• Journal of the Korean Vacuum Society
• /
• v.9 no.4
• /
• pp.379-381
• /
• 2000

Organic materials have potential advantages to be utilized as semiconductors in field effect transistors and light emmiting diodes. Gold, Aluminium, Silver, Chromium and Indium are used by electrodes. Gold is ohmic contact and the others are schottky contact. In this study, Pentacene and various electrode materials were deposited by Organic Molecular Beam Deposition (OMBD) and vacuum evaporation respectively. Those films were photolithographically patterned for measurements. These devices showed no degration after a 15 days of storage in laboratory environment.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2003.02a
• /
• pp.198-198
• /
• 2003

• Proceedings of the Korean Vacuum Society Conference
• /
• 2008.08a
• /
• pp.120-120
• /
• 2008

• Journal of the Korean Vacuum Society
• /
• v.2 no.1
• /
• pp.73-77
• /
• 1993

Hot-wall evaporation technique으로 세라믹 기판 위에 CdS 박막을 성장하였다. 이 때 증발원과 기판의 온도는 각각 570, 40$0^{\circ}C$이고 두께는 3$mu extrm{m}$이었다. 공기 중에서 열처리하여 감도(${\gamma}$), 광전류와 암전류의 비(pc/dc), 최대허용소비전력(MAPD), spectral response 및 응답시간 등을 측정하였다. $550^{\circ}C$, 30분간 열처리한 경우 가장 좋은 광전도 특성을 얻었으며 ${\gamma}$=0.89, pc/cd~104, MAPD: 492mW, rise time이 100ms, decay time이 260ms이었다.

• Journal of Electrical Engineering and Technology
• /
• v.1 no.2
• /
• pp.246-250
• /
• 2006

Highly ordered gold nanodot arrays have been successfully obtained by vacuum evaporation using an anodic aluminum oxide (AAO) as a shadow mask. An AAO mask with the thickness of 300 um was prepared through an anodization process. The structure of the nanodot arrays was studied by a field- emission scanning electron microscope (FE-SEM) equipped with an energy dispersive spectrometer (EDS). A tapping mode atomic force microscope (AFM) was employed for studies of height and phase feature. The nanodot arrays were precisely reproduced corresponding to the hexagonal structure of the AAO mask in a large area. In the gold nanodot arrays, the average diameter of dots is approximately the same as the AAO pore size in the range from 70 um to 80 nm and 100 nm center-to-center spacing. EDS analysis indicated that the gold dots were almost entirely consisted of gold, a highly demanded material.

• Journal of the Korean Applied Science and Technology
• /
• v.15 no.3
• /
• pp.85-90
• /
• 1998

In this study, organic electroluminescent devices(OELD) with a structure of a glass $substrate/ITO/TPD/Tb(ACAC)_3(Phen-Cl)/Alq_3/Al$ was fabricated by vacuum evaporation method, where Tb complex was known to have green light emitting property. Electroluminescent(EL) and I-V characteristics of this structure were investigated. This triple-layer structure shows the green EL spectrum at the wavelwngth of 546nm, which is almost the same as the PL spectrum of $Pb(ACAC)_3(Phen_Cl)$. It was found in current-voltage(I-V) characteristics of the devices that the operating voltage was about 12V.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.7
• /
• pp.620-628
• /
• 2008

Cadmium sulphide (CdS) thin film, which is used as a window layer of heterojunction solar cell, on the glass substrate was deposited by vacuum evaporation. Effects of deposition conditions such as the source and substrate temperature on electrical and optical properties of CdS films was investigated. As the source temperature was increased, the deposition rate of CdS films was increased. In addition, the optical transmittance and the electrical resistivity of CdS films were decreased as the source temperature was increased. This results were attributed to the increase of excess Cd amount in the film. The crystal structure of CdS films exhibited the hexagonal phase with preferential orientation of the (002) plane. As the substrate temperature was increased, the crystal structure of CdS films was improved and the resistivity of the films was increased due to the decrease of excess Cd in film.

• Tribology and Lubricants
• /
• v.14 no.3
• /
• pp.1-6
• /
• 1998

An experimental study was performed to discover the effect of environmental conditions on the rolling resistance behavior of pure silver and lead coated 52100 bearing steel. Pure silver and lead coatings were produced by a thermal evaporation coating method. Experiments using a thrust ball bearing-typed rolling test-rig were performed under vacuum, dry air and controlled humidity conditions. Results showed that agglomeration of particles were suppressed in vacuum environment and resulted in low and stable rolling resistance by shakedown phenomena. Also, humidity related closely to the agglomeration of particles and the rolling resistance after the failure of coated layer.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.666-666
• /
• 2013

CIGS solar cell에서 p-type semiconductor역할을 수행하는 Cu(In,Ga)Se로 이루어진 Absorber layer는 4 element multi binary compound로 stoichiometry 측면에서 다양한 형태가 나타나기 때문에 태양전지 효율을 향상시키기 위해 이에 대한 연구가 활발하다. 우리는 E-beam evaporation 방법으로 다양한 조건의 multi layer로 증착된 CIG layer 위에 일정 두께의 Se을 증착하면서 열처리 조건에 따른 Selenization 메커니즘에 대한 연구를 수행하였다. 결과분석을 위해(in-situ High Temperature) XRD, XPS, Micro Raman spectroscopy, FE-SEM, (Nano Indentor, Atomic Force Microscopy) 등을 이용하여 결정구조, 결정화도, Depth profile, Eg (band gap energy) 등을 알아보고 분석결과간의 상관관계를 고찰하였다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.3
• /
• pp.199-205
• /
• 2005

Polycrystalline cadmium sulfide(CdS) thin films were deposited on glass substrate by chemical bath deposition(CBD) and vacuum evaporation (VE) techniques. VE-CdS films consisted primarily of hexagonal phase, whereas CBD CdS films containing primarily the cubic form. VE-grown films were shown to have better crystallinity than CBD-grown films. The grain size of the CBD films is smaller than the ones of VE films. VE-CdS films exhibited relatively high transmittance in the above-gap region and band gap compared with CBD films. However, CdTe solar cells with these low quality CBD-CdS layers yield higher and more stable characteristics. Current-voltage-temperature measurements showed that the current transport for both cells was controlled by both tunneling and interface recombination but the cells with CBD-CdS displayed less tunneling.