• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.1373-1380
• /
• 2011

Seoul Metro has been continuously growing after its foundation on August 15, 1974 and is currently acting the leading role in the city transportation which is now used by 4,130 thousand people (as of early 2011) on a daily average. The number of the electric rail cars also increased significantly from 60 cars at the time of foundation to 1,954. And the types of the cars also started and operated with the rheostatic control cars in the 70s to the chopper control cars in the 80s and VVVF control cars in the 90s. But the control devices of the driver's cabs haven't been accustomed to the drivers because of it's diversity. Therefore, This study carried out the survey for the preferences of control devices from the incumbent drivers at Seoul Metro. And we analyzed it and suggest a method for standardization of it's locating and naming the major control devices in the driver's cab as the consideration of their preference for it's efficiency, safety, and convenience.

• Proceedings of the KIEE Conference
• /
• 1995.07a
• /
• pp.285-287
• /
• 1995

In the case of driving the SLIM(Single-sided Linear Induction Motor) as the VVVF inverter, the performance of SLIM, which is a thrust, normal force and so on, varies according to a slip frequency as a function of the external load. It is impossible that the open-loop control method control the speed of a SLIM accurately. So that, this paper is proposed the speed control method of a SLIM for a automatic conveyor system with the slip frequency vector control method. To analyze the dynamic characteristics of a SLIM, the state equation is derived from the equivalent circuit of the SLIM, ignored the end effect. The slip frequency and the normal force of SLIM are constantly controlled at the steady state. The simulated results is compared with the experimental values.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.2139-2144
• /
• 2008

There are eight kinds of railroad vehicles such as KTX, PP(Push-Pull), NEL(New Electric Locomotive), EL(Electric Locomotive), DL(Diesel Locomotive), CDC(Commuter's Diesel Car), VVVF(Variable Voltage Variable Frequency) and Resistance Control Car that Korail corporation presently runs, and a variety of vehicles just like EMU(Electric Multiple Unit) and DMU(Diesel Multiple Unit) currently developed and accepted are running in the near future. However, There is still no design standard of the control stand of cockpit and the same compatibility of forms and control unit arrangements for locomotive engineers because no one has tried to approach in an ergonomic way. It can cause Locomotive engineers to make errors using the machinery. when the new vehicles are adopted, The efficiency of operation will quite fall down due to the separate training of the engineers. Therefore, We'd like to improve the accuracy of manipulating the machinery used by the engineers at all times according to the design standard of ergonomic technology and safety engineering and increase the operational efficiency and the safety of railroad vehicles in order to handle the problems as quickly as we can in an emergent situation.

• International Journal of Advanced Culture Technology
• /
• v.10 no.4
• /
• pp.518-528
• /
• 2022

Virtual Reality (VR) has been widely used in various applications to generate realistic virtual environments. A sense of immersion can be increased by providing additional stimuli such as tactile sensation to VR contents. However, it is still challenging to provide a realistic feel for the wind blowing over the whole body by smoothly controlling the airflow. To address this issue, we employ a household electric fan as a wind generating device to provide users with wind experience in VR environments. The wind generating device targets the whole body to mimic the wind we feel outside in our daily life. To do so, we present a low-cost method to smoothly control household fan speed using an Arduino microcontroller. Here, we use the Sinusoidal Pulse Width Modulation (SPWM) technique to generate the sinusoidal voltage required to drive the fan motor. Our experimental results show how Variable Voltage Variable Frequency (VVVF) is implemented at a low cost using our method for household fan speed control. The results can be applied to various VR applications to enhance the sense of immersion by providing users with realistic wind.

• Proceedings of the KIEE Conference
• /
• 1996.07a
• /
• pp.278-280
• /
• 1996

This paper presents a high performance AC propulsion system for electric car to improve traction capability. The presented VVVF inverter was composed of as GTO thyristor and the the controller was fully digitalized by using 32bit DSP. The improved PWM algorithms and the new adhesion control were adapted to improve traction characteristics. This system could be possible the higher reliability and flexibility. The field test results showed the higher performances characteristics of the presented system.

• Proceedings of the KIEE Conference
• /
• 2007.10c
• /
• pp.74-76
• /
• 2007

Generally, the dynamic parameters by dynamic simulation are calculated from an equivalent circuit parameters in design process. By performing dynamics of motors, it can be achieved design considering control pattern. In this paper, dynamic characteristics of LIM (Linear Induction Motors) is discussed using the new method of equivalent circuit parameters by field analysis. And the system response of VVVF(Variable Voltage Variable frequency) are presented for jerk characteristics represented as acceleration and deceleration by steep trust ripple.

• Proceedings of the KIEE Conference
• /
• 2007.10c
• /
• pp.7-9
• /
• 2007

Generally, the dynamic parameters by dynamic simulation are calculated from an equivalent circuit parameters in design process. By performing dynamics of motors, it can be achieved design considering control pattern. In this paper, dynamic characteristics of LIM (Linear Induction Motors) is discussed using the new method of equivalent circuit parameters by field analysis. And the system response of VVVF(Variable Voltage Variable frequency) are presented for jerk characteristics represented as acceleration and deceleration by steep trust ripple.

• Proceedings of the KIPE Conference
• /
• 1998.10a
• /
• pp.425-430
• /
• 1998

This paper presents a high performance low switching PWM technique for the propulsion system of railway such as subway and high speed train. In order to achieve the continuous voltage control to six-step and a low harmonics with low switching frequency under 500Hz, the synchronous PWM technique is combined with a space vector overmodulation and implemented by using DSP. Improved performance and a validation of proposed method are showed by the digital simulation and the experimental results using a 1.65MVA IGBT VVVF inverter and inertia load equivalent to 160 tons railway vehicles.

• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.1112-1114
• /
• 2006

Tilting train has been developed to increase the operational speed of the trains on conventional lines which have many curves. This train are tilted at curves to compensate for unbalanced carbody centrifugal acceleration to a greater extent than compensation produced by the track cant, so that passengers do not feel centrifugal acceleration and thus trains can run at higher speed at curves. This paper show that results of normal capacity calculations of the electrical equipments such as Main transformer, PWM converter, VVVF inverter, traction motor in TTX(tilting train express) with maximum operation speed 180km/h

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.1168-1170
• /
• 2000

A half bridge time sharing type high frequency resonant inverter to give VVVF function in the inverter used as power source of induction heating at high frequency is presented in this paper, this paper also realize the output control of independence irrespective of the switching frequency using Phase-Shift. The analysis of the proposed circuit is generally described by using the normalized parameters. Also, the principle of basic operation and the its characteristics are estimated by the parameters, such as switching frequency, the variation of phase angle(${\varphi}$) of Phase-Shift. It is certain that the proposed circuit will be used and expanded in the high frequency power supplies like induction heating systems.