• Bulletin of the Korean Chemical Society
• /
• 제32권4호
• /
• pp.1273-1276
• /
• 2011

Laponite samples intercalated with $Tb^{3+}$ or $Tb^{3+},Ce^{3+}$ ions were prepared by exchange of Na+ ions in interlayers with $Tb^{3+}$ or $Ce^{3+}$ ions. Strong green and weak blue emissions under vacuum ultraviolet (VUV) excitation (${\lambda}$ = 158 nm) were observed due to the $^5D_4{\rightarrow}^7F_J$ and $^5D_3{\rightarrow}^7F_J$ emission lines, respectively. $Tb^{3+}$ ions in an interlayer of laponite mainly existed in ion pairs or clusters, as evidenced by the concentration-dependent luminescence of the $Tb^{3+}$ ions on the relative intensities of the $^5D_3{\rightarrow}^7F_J$ and the $^5D_4{\rightarrow}^7F_J$ emission lines, due to the action of a cross-relaxation process. The addition of $Ce^{3+}$ ions increased the thermal stability of $Tb^{3+}$ intercalated laponite up to $650^{\circ}C$ and quenched the $^5D_3{\rightarrow}^7F_J$ emission lines, probably by promoting the formation of $Tb^{3+}$ ion pairs at relatively low $Tb^{3+}$ concentrations.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
• /
• pp.1499-1502
• /
• 2005

Dense $BaMgAl_{10}O_{17}:Eu^{2+}$ phosphor particles with a spherical shape have been synthesized through spray pyrolysis method using basic aluminum nitrate precursor as a spray solution. This $BaMgAl_{10}O_{17}:Eu^{2+}$ particles prepared by the spray pyrolysis have shown the stronger emission intensity compared to the commercially-available $BaMgAl_{10}O_{17}:Eu^{2+}$. However, thermal stability of the BAM:Eu b lue phosphor is very poor due to changing from $Eu^{2+}$ to $Eu^{3+}$ at the thermal process, so brightness of the phosphor decreases. To improve the thermal stability of the dense BAM:Eu phosphor, the spherical BAM:Eu particles were coated with pure $BaMgAl_{10}O_{17}$ layer using the hydrolysis reaction in a solution system. The synthesized powders were characterized by XRD, SEM and PL. On the other hand, the emission properties of the BAM:Eu phosphors coated with $BaMgAl_{10}O_{17}$ layer before and after thermal treatment at $500^{\circ}C$ for 30 min were estimated under VUV excitation. The brightness of the coated phosphor was higher than that of the uncoated phosphor. Also, the coating thickness of BAM layer in the BAM:Eu particles was optimized.

• 한국재료학회지
• /
• 제13권12호
• /
• pp.785-790
• /
• 2003

We have synthesized some phosphors in the system $CaO-Y_2$$O_3$-$Al_2$$O_3$by combinatorial polymerized-complex method. Composition and synthetic temperature of phosphors in the library was screened from the emission intensities of individual samples under VUV excitation. In $Tb^{ 3＋}$-activated $CaO-Y_2$$O_3$-$Al_2$$O_3$, green phosphors showing good intensity were found to be X$O_3$$O_{7}$, CaYA1O$_4$, YA1O$_3$, $Y_3$$Al_{5}$$O_{12}$, $Y_4$$A1_2$$O_{9}$ .

• 한국재료학회지
• /
• 제12권11호
• /
• pp.840-844
• /
• 2002

A spherical $BaMgAl_{10}$ $O_{17}$ :Eu phosphor has been synthesized by a multi-step precipitation route. In order to successfully synthesize the phosphor with spherical shape, the hydrated-alumina particles should be controlled for spherical shape. In this process, the hydroxypropyl cellulose (HPC) was used as a dispersing reagent. This reagent plays an important role in that the particles were controlled to have the uniform size of sub-micron. The final product prepared by the multi-step precipitation method maintained spherical shape with uniform size of 0.4$\mu\textrm{m}$. It can be seen in X-ray diffraction patterns, formation of the single phase of $BaMgAl_{10}$ $O_{17}$ :Eu phosphor prepared by the multi-step precipitation method at $1350^{\circ}C$. Also, the emission spectra of spherical $BaMgAl_{O}$ $10_{17}$ :Eu phosphor in the present case was compared with those of commercially-available blue phosphor under VUV (Vacuum Ultra Violet) excitation. The luminescence process of the $BaMgAl_{10}$ $O_{17}$ :Eu phosphor is characterized by the $4f^{6}$$5d^1$longrightarrow4f$^{7}$ transition (blue) of the $Eu^{2+}$ ion acting as an activating center and the maximum luminescence intensity was obtained by reduction treatment at 145$0^{\circ}C$.

• 한국응용과학기술학회지
• /
• 제23권3호
• /
• pp.207-214
• /
• 2006

$Y_{2-x}Gd_xO_3:Eu$, phosphors for plasma display panel(PDP), were prepared by Pechini method which use yttriun chloride, gadolinium chloride, and europium oxide as starting materials. This method is a different way to the synthesis of europium(Eu)-doped phosphors, and it consists of the formation of a polymeric resin obtained by polyesterification between metal chelate compounds and a polyfunctional alcohol. This needs lower temperature than solid-state synthetic method. The prepared $Y_{2-x}Gd_xO_3:Eu$ phosphor particles had spherical shape and coherence. The luminescence intensity of $Y_{2-x}Gd_xO_3:Eu$ phosphor particles increased according to the increase of gadolinium(Gd) content(to 0.8mol%), and $Y_{1.2}Gd_{0.8}O_3:Eu$ phosphors had the highest luminescence intensity under vacuum ultra violet(VUV) excitation. The optimum concentration of Eu in the phosphor and optimum calcination temperature was 3wt% and $1100^{\circ}C$. The prepared phosphors were consist of particle, and its size was between 100nm and 150nm. Among the different polyfunctional alcohols, diethylene glycol(DEG) improved the luminescence intensities of phosphors more than other additives. The Pechini method proved that it is demonstrated to be suitable for the synthesis of phosphors used in PDP.

• 한국세라믹학회지
• /
• 제42권6호
• /
• pp.391-398
• /
• 2005

It is known that $BaMgAl_{10}O_{17}:Eu^{2+}(BAM)$ phosphors currently used have a serious thermal degradation problem. We screened $SrO-B_2O_3-P_2O_5$ system by a solution combinatorial chemistry technique in an attempt to search for a thermally stable blue phosphor for PDPs. A Quantitative Structure Activity Relationship (QSAR) was also obtained using an artificial neural network trained by the result fiom the combinatorial screening. As a result, we proposed a promising composition range in the $SrO-B_2O_3-P_2O_5$ ternary library. These compositions crystallized into a single major phase, $Sr_6BP_5O_{20}:Eu^{2+}$. The structure of $Sr_6BP_5O_{20}:Eu^{2+}$ was clearly determined by ab initio calculation. The luminescent efficiency of $Sr_6BP_5O_{20}:Eu^{2+}$ was 2.8 times of BAM at Vacuum Ultra Violet (VUV) excitation. The thermal stability was also good but the CIE color chromaticity was slightly poor.

• 한국산학기술학회논문지
• /
• 제11권1호
• /
• pp.228-233
• /
• 2010

Methyl hydrogen polysiloxne으로 처리한 ZnO, fumed $SiO_2$와 다양한 망간 전구체를 이용하여 서브마이크로미터 크기를 갖는 망간이 도핑된 $Zn_2SiO_4$ 형광체 입자를 고상법으로 제조하였다. 결정화와 광발광 특성은 XRD, SEM, PL스펙트라를 이용하여 분석하였다. 고상법으로 제조한 망간 도핑된 $Zn_2SiO_4$는 methyl hydrogen polysiloxne 처리한 ZnO의 분산과 응집 때문에 $1000^{\circ}C$에서 성공적으로 얻어졌고, 진공자외선 여기하에서 제조된 입자의 최대 PL강도는 0.02mol Mn, $1000^{\circ}C$에서 확인되었다.

• 한국재료학회지
• /
• 제10권1호
• /
• pp.49-54
• /
• 2000

PDP용의 새로운 녹색 $Al_3GdB_4O_{12}:Tb^{3+} 형광체와 Al_3GdB_4O_{12}:Eu_{3+}$ 적색형광체를 제조한 후 광특성을 분석하였다. 또한 이들 형광체의 발광특성을 상용품인 $Zn_2SiO_4:Mn^{2+}$ 녹색 형광체와 $(Y,Gd)BO_3: Eu^{3+}$ 적색의 PDP 형광체와 상호 비교하였다. 형광체는 $1150^{\circ}C$에서 4시간 동안 공상 반응으로 제조하였다. 147nm의 진공자외선 조사시 $Al_3GdB_4O_{12}:Tb^{3+}$(15mol%) 녹색 형광체의 발광휘도는 상용품 $Zn_2SiO_4: Mn^{2+}$ 보다 증가하였으나 색좌표는 상대적으로 저하되었다. 한편 $Al_3GdB_4O_{12}:Eu^{3+}$(15mol%) 적색 형광체의 발광 휘도는 상용품$(Y,Gd)BO_3: Eu^{3+}$ 보다 작았으나 CIE 색좌표는 일부 개선되었다. $Al_3GdB_4O_{12}$ 형광체는 $\lambda=160nm$에서 모체 흡수에 의한 강한 여기밴드가 있으며, 진공자외선 영역에서 $Al_3GdB_4O_{12}:Tb^{3+}$ 녹색형광체의 여기강도는 $Zn_2SiO_4: Mn^{2+}$ 보다 컸으나 $Al_3GdB_4O_{12}:Eu^{3+}$ 적색 형광체의 여기강도는 $(Y,Gd)BO_3: Eu^{3+}$ 보다는 작았다.