• 제목/요약/키워드: VUV

검색결과 118건 처리시간 0.029초

Influence of N2 gas mixing ratio on secondary electron emission coefficient of MgO single crystal and MgO protective layer

  • 임재용
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2000년도 제18회 학술발표회 논문개요집
    • /
    • pp.201-201
    • /
    • 2000
  • AC-PDP(Plasma Display Panel)에 사용하는 MgO 보호막의 이차전자 방출계수(${\gamma}$)는 AC-PDP의 방전특성을 결정짓는 중요한 요소이다. MgO 보호막의 이차전자 방출계수는 AC-PDP에 주입하는 기체의 종류에 영향을 받는다. 현재 AC-PDP에는 방전특성의 향상과 VUV 발생을 위하여 He, Ne, Xe 등의 혼합기체가 사용되고 있으며, N 기체를 혼합하여 사용할 경우 더 좋은 발광효율을 얻을 수 있다는 보고가 있다. 이번 실험에서는 (100) 방향으로 배향된 MgO Bulk Crystal과 MgO 보호막의 이차전자방출계수를 ${\gamma}$-FIB 장치로 N2 기체혼합비율에 따라 측정하였다. 혼합기체는 Ne=N2 이원기체를 여러 가지 혼합 비율로 변화시켜가며 실험하였다. MgO 보호막은 실제 21inch 규격의 Panel을 사용하였다.

  • PDF

Development of liquid target for beam-target neutron source & two-channel prototype ITER vacuum ultraviolet spectrometer

  • Ahn, B.N.;Lee, Y.M.;Dang, J.J.;Hwang, Y.S.;Seon, C.R.;Lee, H.G.;Biel, W.;Barnsley, R.;Kim, D.E.;Kim, J.G.
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2011년도 제40회 동계학술대회 초록집
    • /
    • pp.421-422
    • /
    • 2011
  • The first part is about development of a liquid target for a neutron source, which is designed to overcome many of the limitations of traditional beam-target neutron generators by utilizing a liquid target neutron source. One of the most critical aspects of the beam-target neutron generator is the target integrity under the beam exposure. A liquid target can be a good solution to overcome damage to the target such as target erosion and depletion of hydrogen isotopes in the active layer, especially for the one operating at high neutron fluxes with no need for water cooling. There is no inherent target lifetime for the liquid target neutron generator when used with continuous refreshment of the target surface exposed to the energetic beam. In this work, liquid target containing hydrogen has been developed and tested in vacuum environment. Potentially, liquid targets could allow a point neutron source whose spatial extension is on the order of 1 to $10{\mu}m$. And the second is about the vacuum ultraviolet (VUV) spectrometer which is designed as a five-channel spectral system for ITER main plasma measurement. To develop and verify the design, a two-channel prototype system was fabricated with No. 3 (14.4 nm~31.8 nm) and No. 4 (29.0 nm~60.0 nm) among the five channels. For test of the prototype system, a hollow cathode lamp is used as a light source. The system is composed of a collimating mirror to collect the light from source to slit, and two holographic diffraction gratings with toroidal geometry to diffract and also to collimate the light from the common slit to detectors. The two gratings are positioned at different optical distances and heights as designed. To study the appropriate detector for ITER VUV system, two different electronic detectors of the back-illuminated charge coupled device and the micro-channel plate electron multiplier were installed and the performance has been investigated and compared in the same experimental conditions. The overall system performance was verified by measuring the spectrums.

  • PDF

CaO-Gd2O3-Al2O3계에서의 PDP용 Eu3+와 Tb3+ 활성 형광체의 탐색 (Screening of Eu3+-and Tb3+-Activated Phosphors for PDP in the System of CaO-Gd2O3-Al2O3)

  • 박상미;김창해;박희동;장호겸;박준택
    • 대한화학회지
    • /
    • 제46권4호
    • /
    • pp.336-345
    • /
    • 2002
  • 본 연구에서는 조합화학을 이용하여 $CaO-Gd_2O_3-Al_2O_3$계에서 $Eu^{3+}$$Tb^{3+}$활성 적색 및 녹색 PDP용 형광체를 탐색하였으며 탐색된 형광체의 합성온도, 최적조성,발광 특성 등을 조사하였다. $CaO-Gd_2O_3-Al_2O_3$의 삼성분계의 형광특성 라이브러리를 작성하기 위하여 210개의 다른 조성을 가진 시료를 고분자 착체 중합법으로 합성하였다. 합성된 형광체 분말을 VUV PL로 측정하여 형광 특성 라이브러리를 작성하였고 발광특성이 잘 나타난 시료를 XPD를 이용하여 결정 구조를 확인하였다. 적색 형광체로서 탐색된 $Ca_{\alpha}$G$d_{0.95-\alpha-\beta}$$Al_\beta$$O_\delta$ : Eu(0.02< $\alpha+\beta$ <0.04)형광체는 색순도 면에서 상용형광체보다 개선된 특성을 보였으며 녹색 형광체로서 탐색된 $CaGdAl_3O_7$ : Tb, Ca$Al_{12}$$O_{19}$ : Tb, $Gd_4Al_2$$O_9$ : Tb, $Gd_3Al_5$$O_{12}$ : Tb 형광체 중에서 $CaGdAl_3O_7$ : Tb, Ca$Al_{12}$$O_{19}$ : Tb형광체는 상용 형광체에 비해 잔광시간이 짧은 특성을 보였다

$FeSO_4$.$7H_2$O를 이용하여 서로 다른 방법으로 만들어진 $\alpha$-${Fe_2}{O_3}$를 표면처리한 ${Y_2}{O_3}$:Eu 적색 형광체의 발광 특성 (Luminescence Characteristics of ${Y_2}{O_3}$:Eu Phosphor Treated with $\alpha$-${Fe_2}{O_3}$Prepared by Two Different Methods Using $FeSO_4$.$7H_2$O)

  • 김봉철;이춘엽;송윤호;서경수;이진호;이남양;김동국;박이순;이병교
    • 한국세라믹학회지
    • /
    • 제38권12호
    • /
    • pp.1115-1122
    • /
    • 2001
  • 여기에너지에 따라서 $Y_2$O$_3$:Eu 형광체의 활성제의 농도 변화 및 적색안료인 $\alpha$-Fe$_2$O$_3$ 미립자를 형광체 표면에 코팅함에 있어 표면처리 방법 변화에 따른 발광 특성의 변화를 연구하였다. 형광체 표면처리방법은 FeSO$_4$를 이용하여 에멀젼 드라이 방식으로 $\alpha$-Fe$_2$O$_3$미립자를 만들어 형광체 표면에 흡착법과 FeSO$_4$/에탄올을 이용하여 액상에서 생성된 침전물을 형광체 표면에 침전시킨 침전법을 사용하였다. 고상법으로 합성된 $Y_2$O$_3$:Eu 형광체의 경우 여기에너지에 따라서 최고 휘도를 나타내는 활성제의 첨가량이 다르게 나타났으며, 활성제의 함량이 진공자외선(147nm)과 저 전압 영역(400V)에서는 0.02mol이고 5kV에서는 0.03mol이었다. 색순도 향상을 위한 안료가 표면 처리되면 형광체의 발광 휘도가 감소한다. 표면처리는 여기에너지에 따라서 다른 방법을 사용해야한다. 진공자외선과 저 전압 영역에서는 불균일 한 막을 형성하는 흡착법으로 표면처리를 해야하고, 고전압영역에서는 침전법으로 표면 처리하는 것이 유리하다.

  • PDF

분무열분해법에 의해 제조된 구형의 녹색 LaPO4:Tb 형광체의 발광특성 (Photoluminescence Characteristics of Spherical-Shaped LaPO4:Tb Phosphor Particles Prepared by Spray Pyrolysis)

  • 이교광;강윤찬;전일운;정경열;박희동
    • 한국재료학회지
    • /
    • 제12권9호
    • /
    • pp.761-766
    • /
    • 2002
  • Fine $LaPO_4$:Tb phosphor particles with spherical shape were prepared by spray pyrolysis. The influence of the precursor type of phosphorous such as ($NH_4$)$_2$$HPO_4$, $NH_4$$H_2$$PO_4$, ($NH_4$)$_3$$PO_4$ and $H_3$$PO_4$ on the morphology and brightness of particles was investigated. As-prepared particles by spray pyrolysis had spherical shape when ($NH_4$)$_2$ $HPO_4$ and $NH_4$$H_2$$PO_4$ were used as the precursor of phosphorous. The precursor type of phosphorous affected the photoluminescence intensity of $LaPO_4$:Tb phosphor particles, but not significant. With changing the content of activator(Tb) and excess of phosphorous, the optimal composition giving the highest photoluminescence intensity was found. The spherical morphology of prepared $LaPO_4$:Tb particles was completely maintained even after the posttreatment up to $1050^{\circ}C$. When the posttreatment temperature was over $1100^{\circ}C$, the particles did not have the spherical shape anymore. However, the highest photoluminescence intensity of prepared $LaPO_4$:Tb particles was obtained at $1050^{\circ}C$. The photoluminescence characteristics of prepared $_LaPO4$:Tb under the vacuum ultraviolet(VUV) illumination was comparable with that of the commercial $Zn_2$$V_4$:Mn and (La,Ce)PO$_4$:Tb phosphor particles. At the optimal condition, the decay time of prepared spherical $LaPO_4$:Tb phosphor particles was about 6.8ms.

화염분무열분해 공정에 의해 합성되어진 Zn2SiO4:Mn 형광체 (Zn2SiO4:Mn Phsophor Particles Prepared by Flame Spray Pyrolysis)

  • 강윤찬;손종락;정경열
    • 한국재료학회지
    • /
    • 제14권8호
    • /
    • pp.600-606
    • /
    • 2004
  • $Zn_{2}SiO_{4}:Mn$ phosphor particles were prepared by a flame spray pyrolysis method. It has been generally known that the high-temperature flame enables fast drying and decomposition of droplets. In the present investigation, the morphology and luminescent property of $Zn_{2}SiO_{4}:Mn$ phosphor were controlled in a severe flame preparation condition. The particle formation in the flame spray pyrolysis process was achieved by the droplet-to-particle conversion without any evaporation of precursors, which made it possible to obtain spherical $Zn_{2}SiO_{4}:Mn$ particles of a pure phase from a droplet. Using colloidal solutions wherein dispersed nano-sized silica particles were adopted as a silicon precursor. $Zn_{2}SiO_{4}:Mn$ particles with spherical shape and filled morphology were prepared and the spherical morphology was maintained even after the high-temperature heat treatment, which is necessary to increase the photoluminescence intensity. The $Zn_{2}SiO_{4}:Mn$ particles with spherical shape, which were prepared by the flame spray pyrolysis and posttreated at $1150^{\circ}C$, showed good luminescent characteristics under vacuum ultraviolet (VUV) excitation.

초음파 (US)와 다양한 파장범위의 자외선 (UV) 조사에 따른 DEP 분해특성에 관한 연구 (The Study of DEP Degradation Properties by Combination US and UV Lamp of Different Wavelength)

  • 나승민;;신동훈;;김지형
    • 한국환경과학회지
    • /
    • 제21권7호
    • /
    • pp.845-853
    • /
    • 2012
  • Diethyl phthalate (DEP) is widely spread in the natural environment as an endocrine disruption chemicals (EDs). Therefore, in this study, ultrasound (US) and ultraviolet (UVC), including various applied power density (10-40 W/L), UV wavelengths (365 nm, 254 nm and 185 nm) and frequencies (283 kHz, 935 kHz) were applied to a DEP contaminated solution. The pseudo-first order degradation rate constants were in the order of $10^{-1}$ to $10^{-4}\;min^{-1}$ depending on the processes. Photolytic and sonophotolytic DEP degradation rate also were high at shortest UV wavelength (VUV) due to the higher energy of photons, higher molar absorption coefficient of DEP and increased hydroxyl radical generation from homolysis of water. Sonolytic DEP degradation rate increased with increase of applied input power and the dominant reaction mechanism of DEP in sonolysis was estimated as hydroxyl radical reaction by the addition of t-BuOH, which is a common hydroxyl radical scavenger. Moreover, synergistic effect of were also observed for sonophotolytic degradation with various UV irradiation.

Measurement of excited Xe($1s_4$) and Xe($1S_5$) atoms by laser absorption spectroscopy in coplanar AC-PDP

  • Oh, P.Y.;Lee, J.H.;Moon, H.S.;Hong, J.W.;Jeon, W.;Cho, G.S.;Choi, E.H.
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
    • /
    • pp.515-517
    • /
    • 2004
  • The laser absorption spectroscopy has been used for measuresurement of the xenon atoms in the resonant $1S_4$ and metastable $1S_5$ states in coplanar AC PDP. For the purpose of improving VUV luminous efficiency and optimization of PDP cells, it is important to study behavior of excited Xe atoms in a micro-discharge cell of a coplanar AC-PDP. We measured the xenon excited density of $1S_5$ and $1S_4$ state under mixture gas of Ne-Xe(10%) with gas pressure of 350 Torr and sustaining gap distance of 150 um.

  • PDF

Improved methods for the preparation of $(Y_{1-x}Eu_x)_2O_3$:MX and $(Y_{1-x-y}Gd_xEu_y)_2O_3$:MX as red phosphor materials

  • Lee, You-Hui;Han, Sang-Do;Kim, Jung-Duk;Chang, Mi-Yeon;Singh, Ishwar.
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
    • /
    • pp.715-718
    • /
    • 2004
  • Substantially improved methods for the preparation of europium-doped yttrium oxide red phosphor with the inclusion of alkali metal halides having a general formula $(Y_{1-x}Eu_x)_2O_3$:MX where 0.025${\leq}$x${\leq}$0.2 and MX is alkali halide in the mole ratio 0.025 to 0.6, more preferably between 0.05 to 0.2 mole, are reported. Another series of the red phosphor materials with general formula $(Y_{1-x-y}Gd_xEu_y)_2O_3$:MX where 0.05${\leq}$x${\leq}$0.40 and 0.025${\leq}$y${\leq}$0.20 and MX is alkali halide in the mole ratio 0.025 to 0.5, more preferably between 0.1 to 0.2 mole, has also been presented. The inclusion of alkali halide greatly increase the luminance of the materials. The materials are very soft with fine particle size less than 100nm. The phosphorescent materials have good luminance in VUV region.

  • PDF