• Journal of the Korea Organic Resources Recycling Association
• /
• v.6 no.1
• /
• pp.31-42
• /
• 1998

A fundamental study on methane conversion for the collection organic wastes of agriculture, forestry and fishers was performed in a laboratory scale. As a result, selected Run B sample were obtained 18.41 C/N Ratio and 168.96 mg/L TCOD; Under the biochemical methane potential test, theoretical and actual methane generation was 313.6 mg/L VS added and 234.2 mg/L VS added, respectively; However, methane conversion from Run B were occurred 74% by anaerobic digestion. By the first order reaction kinetics, kinetic constant were $0.2476d^{-1}$ for Run B. Three steps fill-up filter reactor was evaluated methane content 16% up to promote than blank reactor; TCOD and SCOD have reduced 44.7% and 44.2%, respectively.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.16 no.3
• /
• pp.83-90
• /
• 2008

The ultrasonic pre-treatment of sewage sludge (SS) was investigated to increase soluble organic material and to improve anaerobic biodegradability. Ultrasonic disintegration of SS increased the amount of soluble chemical oxygen demand (SCOD), protein and carbohydrate concentrations whereas particle size decreased due to the break-up of cell walls. In terms of anaerobic biodegradability, ultrasonic pre-treatment enhanced the anaerobic biodegradation of SS, leading to the methane gas production improvement. Biochemical methane potential (BMP) of SS was 211.3 ml $CH_4/gVS$ whereas BMP after ultrasonic pre-treatment was 294.3 ml $CH_4/gVS$. The improvement in BMP for SS treated with ultrasonic disintegration was as high as 40 %. This result indicated that disintegration of SS was efficient for enhancing anaerobic biodegradability.

• Journal of the Korea Concrete Institute
• /
• v.24 no.1
• /
• pp.61-70
• /
• 2012

Recently, the government has been working feverously to save energy and reduce greenhouse gas emission by enacting Basic Act on Low Carbon Green Growth at the national level. Improving the insulation performance of building exterior and insulator can reduce the energy in the building sector. This study is about developing light-weight foamed concrete insulation panel that can be applied to buildings to save energy and to find the optimal condition for the development of insulation materials that can save energy by enhancing its physical, kinetic and thermal characteristics. Various experimental factors and conditions were considered in the study such as foam agent types (AES=Alcohol Ethoxy Sulfate, AOS=Alpha-Olefin Sulfonate, VS=Vegetable Soap, FP=Fe-Protein), foam agent dilution concentration (1, 3, 5%), and foam percentage (30, 50, 70%). Experiment results indicated that the surface tension of aqueous solution including foam agent, was lower when AOS was used over other foam agents. FP produced relatively stable foams in 3% or more, which produced unstable foams containing high water content and low surface tension when diluted at low concentration. Depending on foam agent types, compressive strength and thermal conductivity were similar at low density range but showed some differences at high concentration range. In addition, when concentrations of foam agent and foaming ratio increased, pore size increased and open pores are formed. In all types of foam agent, thermal conductivity were excellent, satisfying KS standards. The most outstanding performance for insulation panel was obtained when FP 3% was used.

• Journal of Chest Surgery
• /
• v.43 no.5
• /
• pp.482-489
• /
• 2010

Background: The purpose of this study was to determine whether hand-measured carotid intima-media thickness (IMT) was a reliable and simple tool that could be used to evaluate the severity of stable coronary artery disease (CAD) with normal high-sensitivity C-reactive protein (CRP). Material and Method: We examined left carotid IMTs in 688 patients with stable CAD and excluded 121 patients with abnormally elevated hs-CRP ($\geq$0.5 mg/dL). We sought to determine the association between risk factors and the severity of stable CAD and carotid IMT in 567 patients who were divided into lower and higher groups based on the median value. Patients underwent a coronary artery angiogram and had at least significant stenosis (>50% of the original luminal diameter involving one or more major coronary artery). Result: Of the 567 patients, 300 (52.9%) were in the lower IMT group and 267 (47.1%) were in the higher IMT group; the median value was 0.76 mm. By multivariable logistic regression analysis, the following groups were different: older age (~49 vs. 70~ years, respectively; OR=6.552), high FBS (~99 vs. 120~ mg/dL; OR=1.713) and severity of CAD (1 vessel vs. 2 vessel disease; OR=1.711, 1 vessel vs. 3 vessel disease; OR=1.714). Conclusion: We conclude that there are correlations between increased carotid IMT and severity of CAD in stable angina patients with normal CRP levels.

• Korean Journal of Animal Reproduction
• /
• v.23 no.2
• /
• pp.149-157
• /
• 1999

The functional role of cumulus cells on the penetration and polyspermy during in vitro fertilization in porcine was examined. The penetration rate was significantly higher (P＜0.01) in oocytes with (61%) than without (25%) cumulus cells, but significant differences in polysper-my rates were not observed. When hyaluronidase was added to the fertilization medium with different concentrations, penetration rates in oocytes with cumulus cells were higher than in oocytes without cumulus cells at 0 (61% vs 34% ; P＜0.05), 0.01 (56% vs 35% ; P＜0.05), 0.1 (66% vs 30% ; P＜0.05) and 1.0mg/$m\ell$ (39% vs 27%). The polyspermy rates were lower in oocytes without than with cumulus cells, and had a tendency to decrease with high concentrations of hyaluronidase. In another experiment, the penetration and polyspermy rates had a tendency to increase as time of sperm-oocyte culture was prolonged. At 16 and 20 h after insemination, the penetration rates were significantly higher (P＜0.05) in oocytes with (48 and 62% for 16 and 20 h) than without (25 and 31% for 16 and 20 h) cumulus cells in medium containing hyaluronidase. Polyspermy rates were significantly (P＜0.05) lower in oocytes without (13% and 16%) than with (37% and 48%) cumulus cells at 16 and 20 h after insemination. In cumulus-free oocytes inseminated in medium containing different concentrations of cumulus cells, the penetration rates were significantly (P＜0.05) higher in medium with than without hyaluronidase. The proportion of polyspermy was lower in medium without than with hyaluronidase at 0 (10% vs 0%), 10$^2$(25% vs 0%), 10$^4$(24% vs 14%) and 10$^{6}$ (29% vs 10% ; P＜0.05) cumulus cells/$m\ell$. These results suggest that cumulus cells can have a positive influence on sperm penetration, its action on polyspermy control does appear to function primarily on zona pellucida by co-culture of cumulus cells and oocytes in medium without hyaluronidase.

• Clean Technology
• /
• v.16 no.1
• /
• pp.51-58
• /
• 2010

Methane was produced from the anaerobic digestion of marine macro-algae. Elemental analysis was first performed to estimate the theoretical methane production of three macro-algae (Undaria pinnatifida, Laminaria japonica, Hizikia fusiformis). Three algae were found to contain C 34 ~ 36%, H 5%, O 37 ~ 43%, N 2 ~ 4%, S 0.4 ~ 0.7%, and ash 14~21%, and the theoretical methane content was in the range of 56 ~ 60%, which can produce 442 ~ 568 mL $CH_4$ per g of volatile solid (VS). Using the biological methane potential (BMP) test, we found that L. japonica resulted in the highest yield of methane (52%). Moreover, various operational conditions, such as algae amount, pH, salinity, particle size, and pre-treatment, were investigated in order to find an optimal condition of anaerobic digestion. At pH 8.0, the autoclaved L. japonica (5g VS/200 mL), when used without washing salt, produced 268.5 mL/g VS which is 65% of the theoretical methane productions. Furthermore, using a CSTR (with the working volume of 7 L out of the total volume of 10 L), we have successfully operated the reactor for 65 days and obtained maximum methane production rate of 1.4 L/day with purity of 70%.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.242.1-242.1
• /
• 2011

산화물 반도체는 높은 이동도와 낮은 공정 온도, 넓은 밴드갭으로 인한 투명성등 많은 장정을 가지고 있어 최근 많이 연구되고 있다. 그 중에서도 InGaZnO (IGZO)는 In, Ga 함유량으로 박막의 전기적 특성을 쉽게 조절할 수 있고 상온에서 비정질 상태로 증착되어 균일성에 장점이 있다. IGZO 박막을 TFT에 적용 시 MOSFET과는 다르게 축적 상태에서 채널이 형성되기 때문에 산화물 반도체 내에 캐리어 농도는 TFT 특성에 많은 영향을 미친다. 또한, 실리콘 기반의 트랜지스터는 이온 주입 및 확산 공정을 통해서 선택적으로 $10^{20}/cm^3$ 이상의 고농도 도핑을 실시하여 좋은 트랜지스터 특성을 확보할 수 있으나 IGZO 박막에는 이러한 접근이 불가능하다. 따라서 IGZO 박막의 캐리어 농도를 조절할 수 있으면 소스/드레인과 반도체의 접촉 저항 감소 및 전계 효과 이동도등 많은 특성을 개선할 수 있다. 본 연구에서는 UV light를 이용하여 IGZO 박막의 캐리어 농도를 조절하였다. IGZO 박막은 UV light 조사로 인해 Mo와 IGZO박막의 접촉저항이 $3{\times}10^3\;{\Omega}^*cm$에서 $1{\times}10^2\;{\Omega}^*cm$로 감소하였다. 이는 UV 조사로 표면에 금속-OH 결합이 생성되어 IGZO 박막의 캐리어 농도가 ${\sim}5{\times}10^{15}/cm^3$에서 ${\sim}3{\times}10^{17}/cm^3$까지 증가하기 때문이다. 또한 표면에 생성된 OH기는 강한 친수성 성질을 보여주고 표면의 높은 에너지 상태는 Self-Assembly Monolayer (SAM) 공정 적용이 가능 하다. 본 실험에서는 SAM 공정을 적용하여 IGZO-based TFT 제작에 성공하였고, 이 TFT는 UV 조사 시간에 따라 전계 효과 이동도가 0.03 $cm^2/Vs$에서 2.1 $cm^2/Vs$으로 100배 정도 증가하였다.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.18 no.2
• /
• pp.93-100
• /
• 2010

In this study, ways to help anaerobic digestion were studied and waste activated sludge were pretreated by grinding, thawing after freezing and grinding after freezing. The volumes of grinding sludge, thawing after freezing and grinding after freezing were decreased 2.08 times, 3.37 times, 3.54 times compared to the volume of sludge respectively and the larger decline in the sludge has been grinding after freezing, thawing after freezing, and grinding. In addition, when the concentrations of SCOD, SBOD and protein were compared, the concentration of freezing sludge was higher than others and the grinding after freezing method seems to be the highest concentration. When the TS, VS removal rates were compared, thawing after freezing method seems to be higher than others method. From these results, grinding after freezing method is very effective for the pretreatment of sludge and it can be expected grinding after freezing method can be an alternative method for prohibiting ocean dumping of sludge after 2012.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.45 no.6
• /
• pp.153-161
• /
• 2003

The purpose of this paper is to investigate the soil-water characteristic curves for an unsaturated soil. To this ends, a series of suction measured test was conducted on the selected 4 kinds of soils taken from different sites of Korea, using modified pressure plate apparatus. Form the test results, the water contents, degree of saturation and volumetric water contents were analyzed with the suction. And the soil-water characteristic curves of unsaturated soil were drawn from the test results for various factors. The characteristic curves drawn with water content vs matric suction were classified certainly the difference in wet side but were not classified in dry side. The characteristic curves drawn with degree of saturation vs matric suction for unsaturated soil were shown the opposite inclination as compared with the former curve. But the characteristic curve with volumetric water content vs matric suction was described suitably not only in wet side condition but also in dry side. And it was found that the volumetric water contents of loose soil was high at the initial condition but that of dense soil was high at final condition (dry side).

• Sleep Medicine and Psychophysiology
• /
• v.19 no.1
• /
• pp.27-34
• /
• 2012

Objectives: The analysis of heart rate variability (HRV) is a useful non-invasive tool to investigate the autonomic nerve function. Previous studies on the relationship between HRV and depression have been reported controversial results. Similarly, the correlation between the serum lipids and depression is debatable. The purpose of this study is to examine the relationship between heart rate variability, lipid profile and depression. Methods: A total of 42 patients with major depressive disorder (MDD) and 32 age and sex-matched normal subjects who had no previous history of major medical and mental illnesses were recruited for this study. A structured-interview was used to assess the general characteristics and psychiatric illness. HRV measures were assessed by time-domain and frequency-domain analyses. Psychological symptoms were measured using the Hamilton rating scale for anxiety (HAM-A), Hamilton rating scale for depression (HAM-D). In addition, the evaluation for lipid profile was performed by blood test. Results: In serum lipid profile test, MDD group showed higher cholesterol ($197.68{\pm}42.94$ mg/dL vs. $176.85{\pm}34.68$ mg/dL, p=0.044), TG ($139.45{\pm}92.54$ mg/dL vs. $91.4{\pm}65.68$ mg/dL, p=0.018), LDL ($130.03{\pm}33.18$ vs. $106.62{\pm}27.08$, p=0.004) level than normal control group. In HRV time domain analyses, the standard deviation of the NN interval (SDNN) was decreased in MDD group than normal control group, but was not significant ($32.82{\pm}14.33$ ms vs. $40.36{\pm}21.40$ms, p=0.078). ApEn (Approximate Entrophy) was significantly increased in MDD group than normal control group ($1.13{\pm}0.11$ vs. $0.91{\pm}0.18$, p<0.001). ApEn was correlated with LDL level (r=0.277, p=0.028), HAM-D scores (r=0.534, p<0.001) and HAM-A scores (r=0.470, p<0.001). Conclusions: MDD patients showed increased ApEn, one of the HRV measurement. And this ApEn was correlated with LDL, HAM-D and HAM-A scores. In this study, the analysis of ApEn would be a useful test of MDD.