• Imaging Science in Dentistry
• /
• v.43 no.2
• /
• pp.77-84
• /
• 2013

Purpose: This study aimed to provide comparative measurements of the effective dose from direct and indirect digital panoramic units according to phantoms and exposure parameters. Materials and Methods: Dose measurements were carried out using a head phantom representing an average man (175 cm tall, 73.5 kg male) and a limbless whole body phantom representing an average woman (155 cm tall, 50 kg female). Lithium fluoride thermoluminescent dosimeter (TLD) chips were used for the dosimeter. Two direct and 2 indirect digital panoramic units were evaluated in this study. Effective doses were derived using 2007 International Commission on Radiological Protection (ICRP) recommendations. Results: The effective doses of the 4 digital panoramic units ranged between $8.9{\mu}Sv$ and $37.8{\mu}Sv$. By using the head phantom, the effective doses from the direct digital panoramic units ($37.8{\mu}Sv$, $27.6{\mu}Sv$) were higher than those from the indirect units ($8.9{\mu}Sv$, $15.9{\mu}Sv$). The same panoramic unit showed the difference in effective doses according to the gender of the phantom, numbers and locations of TLDs, and kVp. Conclusion: To reasonably assess the radiation risk from various dental radiographic units, the effective doses should be obtained with the same numbers and locations of TLDs, and with standard hospital exposure. After that, it is necessary to survey the effective doses from various dental radiographic units according to the gender with the corresponding phantom.

• Journal of Embryo Transfer
• /
• v.12 no.1
• /
• pp.67-74
• /
• 1997

This study was carried out to increase the viability of bovine frozen4hawed in vitro produced (IVP) embryos and pregnancy rate by direct transfer method. Cumulus-oocyte complexes were aspirated from excised Hanwoo ovaries and matured in TGM 199 for 20~22 hours at 38.5$^{\circ}C$ in 2% $CO_2$ in air. Matured oocytes were fertilized with capacitated sperm for 6 hours and then co-cultured with cumulus cells for 9 days. 63% of the oocytes cultured was deaved and 29% out of them developed into blastocysts. Good or excellent grade of blastocysts on D 7 or 8 were frozen with 1.8M ethylene glycol as a cryoprotectant for direct transfer. Frozen embryos were thawed at 2$0^{\circ}C$ water for 10 sec following 4~5 second in air. For the survival assay of frozen4hawed lVP blastocysts, they were cultured in TCM 199 supplemented with 100$\mu$M $\beta$-mercaptoethanol and 20% FCS for 72 hours. The percentage of embryos developed to re-expanded or hatched after 72 hours culture was 95. 5 and 77.3%, respectively. When frozen-thawed Ivp embryos were transferred to 43 synchronized recipients by direct transfer method, eighteen recipients (41.8%) was pregnant. The highest pregnant was in naturafly synchronized recipients (71.4%), but induced estrus by using PRID(29.2%) and PGF$_2$$\alpha$(20.0%) was showed lower pregnancy rate. The pregnancy rate was higher in day 7 blastocysts(56.0%) than day 8 blastocysts(22.2%). (Key words: in vitro produced, blastocyst, frozen-thawed, direct transfer)

• Journal of Korean Society of Forest Science
• /
• v.80 no.4
• /
• pp.393-407
• /
• 1991

The vegetation structure within Chamaecyparis obtusa plantation was analyzed for the purpose of applying the effective forestation method for Chmaecyparis obtusa plantation, tending and regeneration in the southern districts of korea. The results were as follows ; 1. The importance percentage was high in the order of Eurya japonica, Rhus verniciflua, Chamaecyparis obtusa, Lindera erythrocarpa, Carpinus laxiflora, Styrax japonica, Viburnum dilatatum, Zanthoxylum piperitum and Smilax china among the vegetation of Chamaecyparis obtusa. Importance percentage of natural seedling of Chamaecyparis obtusa was high in lower story but gradually decreased in middle story. 2. The basal area of upper trees had a negative correlation with the density of natural seedlings in the middle and lower story, and it represents that the basal area of upper trees had some effect on the density of natural seedlings within understories. 3. The rate of the A and B class by Raunkiaer's frequency was higher in the vegetation of middle story than that of lower story. 4. By Morisita's index, the species of Chamaecyparis obtusa, Rhus verniciflua, Lindera erythrocarpa, Smilax china. Callicarpa japonica and Lindera obtusiloba were randomly distributed at lower story, but they were aggregatively distributed at middle story. At all of middle and lower story, Eurya japonica and Viburum dilatatum were randomly distributed, and Carpinus laxiflora, Zanthoxylum piperitum and Picrasma quassioides were aggregatively distributed. 5. The number of appearance species and the value of species diversity in western survey area were more than that of eastern survey area. 6. The value of species diversity at lower story was higher than that of middle story, and it represents that the number of individuals of appearance species was composed more even at lover story than middle story. 7. According to cluster analysis by similarity index, the survey areas were separated from inland and seacoast districts. 8. Judging from each stories ordination analysis by dissimilarity index, the vegetation was separated from lower and middle story, and the vegetation of lower story was more progressed succession stage than that of middle story. 9. In Chamaecyparis obtusa stands, Eurya japonica had a positive correlation with Sorbus alnifolia, Hex macropoda. Ficus erecta and Trachelospermum asiaticum, but it had a negative correlation with Zanthoxylum piperitum, Carpinus laxiflora and Parthenocissus tricuspidata. 10. In estimation of the productivity of Chamaecyparis obtusa stands, the value of SC (Conic surface) and VP (Parabolic volume) for upper trees was 94.5% and 99.63%, respectively and SC and VP of middle story was 5.49% and 0.37%, respectively. In the species of middle story, material productivity was high in order of Eurya japonica. Lindera eryhrocarpa, Rhus verniciflua. Carpinus laxiflora and Styrax japonica.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.21 no.4
• /
• pp.317-326
• /
• 2019

Salinity which is often detected on reclaimed land is a major detrimental factor to crop growth. It would be advantageous to develop an approach for assessment of salinity and drought damages using a non-destructive method in a large landfills area. The objective of this study was to examine applicability of the decision tree classifier using imagery for classifying for spring potatoes (Solanum tuberosum) damaged by salinity or drought at vegetation growth stages. We focused on comparing the accuracies of OA (Overall accuracy) and KC (Kappa coefficient) between the simple reflectance and the band ratios minimizing the effect on the light unevenness. Spectral merging based on the commercial band width with full width at half maximum (FWHM) such as 10 nm, 25 nm, and 50 nm was also considered to invent the multispectral image sensor. In the case of the classification based on original simple reflectance with 5 nm of FWHM, the selected bands ranged from 3-13 bands with the accuracy of less than 66.7% of OA and 40.8% of KC in all FWHMs. The maximum values of OA and KC values were 78.7% and 57.7%, respectively, with 10 nm of FWHM to classify salinity and drought damages of spring potato. When the classifier was built based on the band ratios, the accuracy was more than 95% of OA and KC regardless of growth stages and FWHMs. If the multispectral image sensor is made with the six bands (the ratios of three bands) with 10 nm of FWHM, it is possible to classify the damaged spring potato by salinity or drought using the reflectance of images with 91.3% of OA and 85.0% of KC.

• Journal of the Korean Society of Radiology
• /
• v.82 no.6
• /
• pp.1477-1492
• /
• 2021

Purpose Dedicated breast CT is an emerging volumetric X-ray imaging modality for diagnosis that does not require any painful breast compression. To improve the detection rate of weakly enhanced lesions, an adaptive image rescaling (AIR) technique was proposed. Materials and Methods Two disks containing five identical holes and five holes of different diameters were scanned using 60/100 kVp to obtain single-energy CT (SECT), dual-energy CT (DECT), and AIR images. A piece of pork was also scanned as a subclinical trial. The image quality was evaluated using image contrast and contrast-to-noise ratio (CNR). The difference of imaging performances was confirmed using student's t test. Results Total mean image contrast of AIR (0.70) reached 74.5% of that of DECT (0.94) and was higher than that of SECT (0.22) by 318.2%. Total mean CNR of AIR (5.08) was 35.5% of that of SECT (14.30) and was higher than that of DECT (2.28) by 222.8%. A similar trend was observed in the subclinical study. Conclusion The results demonstrated superior image contrast of AIR over SECT, and its higher overall image quality compared to DECT with half the exposure. Therefore, AIR seems to have the potential to improve the detectability of lesions with dedicated breast CT.

• Journal of Korean Academy of Nursing Administration
• /
• v.8 no.2
• /
• pp.273-281
• /
• 2002

Purpose. The study was done to develop nursing guidelines to prevent nursing negligence in the clinical setting that would lead to malpractice. Method. A comprehensive review of the literature and focus groups interviews were used to search for malpractice cases related to "observation", one of the most basic nursing activities. The cases were analyzed with respect to nursing practice and a legal expert was consulted on the content. Results. 4 malpractice cases related to observation negligence were selected for this study; 1) a case of failing to observe dyspnea after a thyroidectomy, 2) a case of failing to observe a depressed patient for suicide attempts, 3) a case of failing to observe a VP shunt obstruction, 4) a case of failing to observe a cardiac ischemia after a bronchoscopy. 11 guidelines were developed for clinical nurses and 13 guidelines for nursing managers. Conclusion. These guidelines are useful in preventing malpractice due to nursing negligence. Therefore nurses need to apply them to their practices and continue to make an effort to develop guidelines for other malpractice situations.

• Speech Sciences
• /
• v.8 no.2
• /
• pp.133-148
• /
• 2001

Focus and information structure are closely related with the distribution of pitch accents. A focused word conveys new information and bears a pitch accent. A content word can usually get a pitch accent, but it can be deaccented if it is mentioned earlier in the discourse. In this paper, we test how English native speakers and Korean learners of English realize pitch accents according to focus and information structure of a sentence. The production experiment shows that English native speakers give a pitch accent to narrow-focused items, deaccenting all the other items of the sentence. For VP broad focus, native speakers give a pitch accent either to both the verb and its complement or to the complement only. On the other hand, it is found that Koreans give pitch accents to most content words regardless of focus and information structure. Moreover, the perception experiment confirms that Koreans' intonation patterns, which are not appropriate in terms of focus and information structure, may jeopardize listeners' comprehension. This paper shows that Korean speakers have little knowledge about focus and information structure for intonational realization, and that such notions should be applied to teaching of English intonation.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07a
• /
• pp.172-176
• /
• 2002

This paper describes a MEMS-based micro-fluxgate magnetic sensing element using Ni$\_$0.8/Fe$\_$0.2/ film formed by electroplating. The micro-fluxgate magnetic sensor composed of a thin film magnetic core and micro-structured solenoids for the pick-up and the excitation coils, is developed by using MEMS technologies in order to take advantage of low-cost, small size and lower power consumption in the fabrication. A copper with 20um width and 3um thickness is electroplated on Cr(300${\AA}$)/Au(1500${\AA}$) films for the pick-up(42turn) and the excitation(24turn) coils. In order to improve the sensitivity of the sensing element, we designed the magnetic core into a rectangular-ring shape to reduce the magnetic flux leakage. An electroplated permalloy film with the thickness of 3 $\mu\textrm{m}$ is obtained under 2000Gauss to induce magnetic anisotropy. The magnetic core has the high DC effective permeability of ∼1,100 and coercive field of -0.1Oe. The fabricated sensing element using rectangular-ring shaped magnetic film has the sensitivity of about 150V/T at the excitation frequency of 2MHz and the excitation voltage of 4.4Vp-p. The power consumption is estimated to be 50mW.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.263-263
• /
• 2011

본 연구에서는 DBD (Dielectric Barrier Discharge)방식의 상압 플라즈마를 이용하여 FPD (flat panel display) 공정에 사용되는 a-Si, Si3N4의 식각 공정 특성을 평가하였다. 사용된 DBD 반응기는 기존의 blank planar plate 형태의 Power가 인가되는 anode 부분과 Dielectric Barrier 사이 공간을 액상의 도전체로 채워 넣은 형태의 전극이 사용 하였으며, 인가 Power는 40kHz AC 최대인가 전압 15 kVp를 사용 하였다. 방전 가스는 N2, 반응가스로는 CDA (Clean Dry Air)와 NF3, 액상의 Etchant를 사용 하였으며 모든 공정은 In-line type으로 시편을 처리 하였다. NF3의 경우 30 mm/sec 이송속도 1회 처리 기준 a-Si 1300${\AA}$, Si3N4 1900${\AA}$의 식각 두께를 보였으며 a-Si : Si3N4 선택비는 N2, CDA의 조절을 통하여 최대 1:2에서 4:1 정도까지 변화가 가능하였다. 균일도는 G2 (370 mm${\times}$470 mm)의 경우 5.8 %의 균일도를 보이고 있다. 이외에도 NF3 공정의 경우 실제 TFT-LCD 공정 중 n+ channel (n+ a-Si:H)식각 공정에 적용하여 5.5 inch LCD panel feasibility를 확인 할 수 있었다. 액상 Etchant (HF수용액, NH4HF2)는 버블러를 사용하여 기화 시켜 플라즈마 소스를 통해 1차적으로 활성화 시키고 기존 DBD 반응기에 공급해 주는 형태로 평가를 진행하였다. 식각 특성은 30mm/sec 이송속도에서 a-Si $25{\AA}$ 정도로 가스 형태의 Etchant에 비해 매우 낮은 수준이나 Etching rate 향상을 위한 factor 파악 및 개선을 위한 연구를 진행 하였다.

• ETRI Journal
• /
• v.27 no.6
• /
• pp.691-696
• /
• 2005

In asynchronous transfer mode (ATM) networks, fixed length cells of 53 bytes are transmitted. A cell may be discarded during transmission due to buffer overflow or a detection of errors. Cell discarding seriously degrades transmission quality. The quality degradation can be reduced by employing efficient forward error control (FEC) to recover discarded cells. In this paper, we present the design and implementation of decoding equipment for FEC in ATM networks based on a single parity check (SPC) product code using very-large-scale integration (VLSI) technology. FEC allows the destination to reconstruct missing data cells by using redundant parity cells that the source adds to each block of data cells. The functionality of the design has been tested using the Model Sim 5.7cXE Simulation Package. The design has been implemented for a $5{\times}5$ matrix of data cells in a Virtex-E XCV 3200E FG1156 device. The simulation and synthesis results show that the decoding function can be completed in 81 clock cycles with an optimum clock of 56.8 MHz. A test bench was written to study the performance of the decoder, and the results are presented.