• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.2175-2178
• /
• 2008

본 연구에서는 전면에 투과성 구조물이 위치한 직립케이슨 및 유공케이슨에 대해 수치모의를 실시하여 케이슨의 형태 및 투과성 구조물의 존재유무에 따른 반사율의 감소효과에 대하여 알아보았다. 수치모의에 사용된 모델은 비압축성 점성유체에 대한 복잡한 자유수면 변위의 표현이 가능한 VOF법을 적용하여 Navier-Stokes 방정식을 보다 정확하게 해석하는 CADMAS-SURF(수치파동수로)를 사용하였다. 상기 구조물에 규칙파를 입사하여 반사율을 산정한 결과 주기에 따라 차이가 있지만, 직립케이슨만이 존재하는 경우에 비해 직립케이슨 전면에 투과성 구조물이 위치한 경우 대략 5%정도의 반사율 감소효과를 얻을 수 있었고 유공케이슨만이 존재하는 경우에 비해 유공케이슨과 투과성 구조물이 조합 된 경우에는 20%이상의 감소효과를 얻을 수 있었다. 따라서, 방파제 전면에 위치한 구조물에 대한 반사파의 피해 감소 및 항만 내부 정온도를 고려한 안벽의 시공이 요구되어 질 경우에 투과성 구조물은 직립케이슨과의 조합보다는 반사율을 상대적으로 크게 감소시킬 수 있는 유공케이슨과의 조합이 적절함을 알 수 있었다.

• Clean Technology
• /
• v.10 no.2
• /
• pp.89-100
• /
• 2004

The optimization for the water bath design and the skimmer installation are conducted to separate floated-sludge from the waste water in a water bath of a painting booth. VOF(volume of fluid) model is used to analyze the flow pattern of sludge-water-air mixture in a water bath. From the results of numerical analysis, the design criteria of the skimmer, the separation plate and the sludge inlet port of a water bath are obtained for effective sludge separation from water in bath. Furthermore, the installation condition of the skimmer immersed in water is optimized to minimize entrained air and pressure loss.

• Journal of Energy Engineering
• /
• v.11 no.3
• /
• pp.237-246
• /
• 2002

If the safety depressurization system of APR-1400, the Korean next generation reactor, is in operation, water, air and steam are successively discharging into a in-containment refueling water storage tank through spargers. Among the phenomena occurring during the discharging processes, the air bubble clouds produce a low-frequency and high-amplitude oscillatory loading, which may result in the most significant damages to the submerged structures if the oscillation frequency is the same or close to the natural frequency of the structures. The involved phenomena are so complicated that most of the prediction of frequency and pressure loads has been resorted to experimental work and computational approach has been precluded. This study deals with a numerical simulation on the behavior of air bubble clouds discharging into a water pool through a sparger, by using a commercial thermal hydraulic analysis code, FLUENT, version 4.5. Among the multiphase flow models, the VOF (Volume Of Fluid) model was selected to simulate the water, air and steam flows. A satisfactory result was obtained comparing the analysis results with the ABB-Atom test results which had been performed for the development of sparser.

• Journal of Energy Engineering
• /
• v.12 no.4
• /
• pp.259-266
• /
• 2003

Load reduction ring (LRR) was installed on the ABB-Atom sparger to reduce the oscillatory loadings due to the air bubble clouds in the water pool in case of safety relief system operations. In order to investigate the effect of LRR on the pressure field, a numerical simulation on the behavior of air bubble clouds discharging into a water pool through a ABB-Atom sparser without LRR was performed by using a commercial thermal hydraulic analysis code, FLUENT 4.5. Among the multi-phase models contained in the code, the VOF (Volume Of Fluid) model was used to simulate the interface of water, air and steam flows. By comparing the analysis results with the previous ones, the load reduction ring has an effect on reducing the oscillatory loads at the wall. It also includes the effect of air mass and inlet boundary conditions of the pipe on the pressure oscillations at the wall.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.22 no.6
• /
• pp.750-757
• /
• 2016

This study presents the wave run-up height around single and multiple surface-piercing cylinders according to wave period and steepness. In order to simulate 3D incompressible viscous two-phase turbulent flow, the present study employed a volume of fluid (VOF) method with realizable $k-{\varepsilon}$ turbulence model based on commercial Computational Fluid Dynamics (CFD) software, "STAR-CCM". The wave periods at model scale were 1.269s and 1.692s for a single cylinder and 1.716s for multiple cylinders. In each case, wave steepness of has 1/30 and 1/16 were used, respectively. Consequently, the results for wave run-up height with regard to wave steepness and period were compared with those of relevant previous experimental studies. The numerical simulation results showed a good qualitative agreement with experiments.

• Journal of Korea Water Resources Association
• /
• v.37 no.6
• /
• pp.461-466
• /
• 2004

This study presents a combined experimental and numerical effort to investigate wave breaking of sinusoidal waves in a surf zone. Numerical predictions are verified by comparing to laboratory measurements. The model solves the Reynolds equations and$textsc{k}$-$\varepsilon$ models for the turbulence analysis. To track the free surface displacement, the volume of fluid method is employed. As the height of incident wave increases, the wave breaking occurs at a closer point of the slope in the numerical model and laboratory experiments with the same depth and period. When a wave breaking occurs, the ratio of wave height becomes larger, with the same wave height and depth, as the period increases.

• Tunnel and Underground Space
• /
• v.20 no.2
• /
• pp.82-91
• /
• 2010

Grouting technology is one of the ground improvement methods used in water controlling and reinforcement of rock mass in underground structure construction. It is necessarily required to find out the characteristics of grout flow through discontinuities in a rock mass for an adequate grout design and performance assessment. Laminar flow is not always applicable in simulating a grout flow in a rock mass, since the rock joints usually have apertures at a micro-scale and the flow through these joints is affected by the joint roughness and the velocity profile of the flow changes partially near the roughness. Thus, the influence of joint roughness and aperture on the grout flow in rough rock joint was numerically investigated in this study. The commercial computational fluid dynamics code, FLUENT, was applied for this purpose. The computed results by embedded Herschel-Bulkley model and VOF (volume of fluid) model, which are applicable to simulate grout flow in a narrow rock joint that is filled with air and water, were well compared with that of analytical results and previously published laboratory test for the verification. The injection pressure required to keep constant injection rate of grout was calculated in a variety of Joint Roughness Coefficient (JRC) and aperture conditions, and the effect of joint roughness and aperture on grout flow were quantified.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.30 no.6
• /
• pp.270-285
• /
• 2018

The behavior of wave-induced pore water pressure inside the rubble mound and seabed, and the resultant structure failure are investigated, which are used in design of the composite breakwater representing the coastal and harbor structures. Numerical simulation techniques have been widely used to assess these behaviors through linear and nonlinear methods in many researches. While the combination of strongly nonlinear analytical method and turbulence model have not been applied yet, which can simulate these characteristics more accurately. In this study, olaFlow model considering the wave-breaking and turbulent phenomena is applied through VOF and LES methods, which gives more exact solution by using the multiphase flow analytical method. The verification of olaFlow model is demonstrated by comparing the experimental and numerical results for the interactions of regular waves-seabed and regular waves-composite breakwater-seabed. The characteristics of the spatial distributions of horizontal wave pressure, excess-pore-water pressure, mean flow velocity and mean vorticity on the upright caisson, and inside the rubble mound and seabed are discussed, as well as the relation between the mean distribution of vorticity size and mean turbulent kinetic energy. And the stability of composite breakwater are also discussed.

• Proceedings of KOSOMES biannual meeting
• /
• 2017.11a
• /
• pp.162-163
• /
• 2017

해양 HNS(Hazardous and Noxious Substances)의 유출 사고 시, 막대한 인명 피해와 환경 훼손을 피하기 위해 유출 사고 조기 예측과 정확한 확산 경로를 예측하는 것이 필수적이다. 본 연구의 최종목적은 전산유체역학을 이용하여 HNS사고가 발생하였을 때 위험구역을 적절히 예측할 수 있는 수치해석기법을 개발하고, 다양한 해양사고조건과 환경영향을 고려하여 근접역에서의 2차원 확산 특성을 고찰하고 확산 현상을 예측하기 위한 모델을 개발하는 것이다. 본 연구에서는 상용코드인 ANSYS FLUENT(V. 17.2)을 사용하여 근접역에서의 2차원 확산특성을 모사하고 분석하였다. 특히, 누출된 HNS의 위치별 농도를 예측하기 위해 종수송방정식(Species Transport Equation)을 이용하였으며 RANS(Reynolds-Averaged Navier-Stokes) 방정식과 표준 $k-{\varepsilon}$ 모델을 이용하여 난류유동을 모사하였다. 해석된 결과는 문헌에서 얻어진 실험데이터와 상호비교하였으며 해수의 유속, HNS의 밀도에 따른 유층 두께, 해수면 HNS 평균 농도 그리고 HNS 전파 속도를 분석하였다. 유층 두께는 해류 유속에 따라 변화하며 변화 경향에 따라 두 구간으로 나눌 수 있다. 해류 전파 속도는 대체로 해류 유속과 선형적 비례관계를 갖는 것으로 나타났다. 해수면 평균 HNS 농도는 해류 유속에 선형적으로 비례하여 감소하며, HNS 밀도가 큰 경우 해수면 평균 HNS 체적 농도는 더 빠르게 감소하게 된다. 이러한 결과는 HNS 확산 특성을 분석하고 관련된 예측모델을 개발하는 데에 기여할 수 있다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.10
• /
• pp.979-988
• /
• 2012

The 3D structure of GDL for fuel cells was measured using high-resolution X-ray tomography in order to study material transport in the GDL. A computational algorithm has been developed to remove noise in the 3D image and construct 3D elements representing carbon fibers of GDL, which were used for both structural and fluid analyses. Changes in the pore structure of GDL under various compression levels were calculated, and the corresponding volume meshes were generated to evaluate the anisotropic permeability of gas within GDL as a function of compression. Furthermore, the transfer of liquid water and reactant gases was simulated by using the volume of fluid (VOF) and pore-network model (PNM) techniques. In addition, the simulation results of liquid water transport in GDL were validated by analogous experiments to visualize the diffusion of fluid in porous media. Through this research, a procedure for simulating the material transport in deformed GDL has been developed; this will help in optimizing the clamping force of fuel cell stacks as well as in determining the design parameters of GDL, such as thickness and porosity.