• 벤딩인더스트리
• /
• 제10권2호통권31호
• /
• pp.47-47
• /
• 2011

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2008년도 춘계종합학술대회 A
• /
• pp.411-414
• /
• 2008

본 연구은 광섬유 자이로의 페루프 제어기 보드의 자체 시험 평가를 위한 광학 회로의 모사에 관한 논문이다. 본 시뮬레이터에서는 디지털 신호 처리를 이용하여 입력 레이트에 대한 광섬유 고리의 Cosine응답 특성을 출력으로 내보낸다. 광섬유 고리는 $Vo(t)=K3[1+\cos\{K1(Vm(t)-Vm(t-{\tau}))+K2\}]$의 응답 특성을 갖고 K1, K2, K3값의 입력으로 특정 레이트를 인가하여 출력값의 변화를 확인할 수 있다. 실제 광섬유 고리와 입력 레이트에 대한 같은 Cosine 응답 파형을 내보낼 수 있어 광학회로 없이 광섬유 자이로 폐루프 제어기 보드의 자체 시험 평가가 가능하다.

• 대한의용생체공학회:의공학회지
• /
• 제41권2호
• /
• pp.84-93
• /
• 2020

Despite of a lot of studies about proprioception tests, there are little study results to investigate the relationship between the functional movement and proprioception level. In this study, we tried to perform quantitative analysis for the effect of ankle joint proprioception level on the one leg standing postural control ability. Nine healthy people volunteered for this study. Force and position aspects of proprioception were evaluated using the electromyography system (EMG) and mobile clinometer application, respectively. The center of pressure (COP) trajectories, measured by a pressure mat sensor, were used for quantitative analysis of balance for each subject. We computed indices and errors of force and position aspects of proprioception from the EMG and ankle angle. Mean velocity of total and anterior-posterior direction (Vm and Vm_ap), root mean squared distance in anterior-posterior direction (RDap), travel length (L), and area (A) of COP trajectories were also calculated as indices of postural control ability of subjects. Two aspects of proprioception showed the low correlation from each other as previous studies. However, the EMG error of gastrocnemius lateral activation showed a high correlation coefficient with COP variables such as Vm (ρ=0.817, p=0.007), Vm_ap (ρ=0.883, p=0.002), RDap (ρ=0.854, p=0.003), L (ρ=0.817, 0.007) and A (ρ=0.700, p=0.036). Within our knowledge, this is almost the first study that investigated the relationship between proprioception level and functional movement. These study results could support that the ankle joint proprioception facilitation exercise would have positive effects on functional balance rehabilitation interventions.

• IEIE Transactions on Smart Processing and Computing
• /
• 제4권3호
• /
• pp.169-172
• /
• 2015

Dalvik is a virtual machine (VM) that is designed to run Java-based Android applications. A trace-based just-in-time (JIT) compilation technique is currently employed to improve performance of the Dalvik VM. However, due to runtime compilation overhead, the trace-based JIT compiler provides only a few simple optimizations. Moreover, because each trace contains only a few instructions, the trace-based JIT compiler inherently exploits fewer optimization and parallelization opportunities than a method-based JIT compiler that compiles method-by-method. So we propose a new method-based JIT compiler, named DEX2C, in order to improve performance by finding more opportunities for both optimization and parallelization in Android applications. We employ C code as an intermediate product in order to find more optimization opportunities by using the GNU C Compiler (GCC), and we will detect parallelism by using the Intel C/C++ parallel compiler and the AESOP compiler in our future work. In this paper, we introduce our DEX2C compiler, which dynamically translates Dalvik bytecodes (DEX) into C code with method granularity. We also describe a new method-based JIT interface in the Dalvik VM for the DEX2C compiler. Our experiment results show that our compiler and its interface achieve significant performance improvement by up to 15.2 times and 3.7 times on average, in Element Benchmark, and up to 2.8 times for FFT in Smartbench.

• 한국세라믹학회지
• /
• 제30권4호
• /
• pp.289-298
• /
• 1993

Properties in terms of the variation of the glass compositions, which were density (p), molar volume(Vm), atom/ion packing density (Dp), refractive index (nD), transformation temperature (Tg), dilatometric softening point (Td), thermal expansion coefficient (α), Young's modulus (E), and knoop hardness (KHN) were investigated in CaO-SiO2 glasses and CaO-P2O5-SiO2 glasses containing less than 10mole% of P2O5. Those properties were measured by density measurement kit, Abbe refractometer, dilatometer, ultrasonic pulse echo equipment, and micro hardness tester. When CaO content was increased in CaO-SiO2 glasses, p, Dp, nD, Tg, Td, α, E and KHN were increased, while Vm was decreased. When P2O5 was added to the CaO-SiO2 glasses with constant CaO/SiO2 ratio as 1.07, p, Dp, nD, Tg, Td, α, E and KHN were decreased, while Vm was increased. When the amount of P2O5 in glasses was kept constant, the changes of the properties with variation of CaO content in the CaO-P2O5-SiO2 glasses were very similar to those of CaO-SiO2 glasses. These phenomena could be explained by the structural role of P2O5 in the CaO-P2O5-SiO2 glasses, which was polymerization of siicate structures and resulted in [PO4] monomer structure in glasses. Due to this structural characteristics, the bond strength and packing density were changed with compositions. Proportional relationships between 1) np and Dp, 2) Tg, Td, α and CaO content, 3) E and Vm-1, and 4) KHN and P2O5 content were evaluated in this investigation.

• 한국농공학회지
• /
• 제17권3호
• /
• pp.3885-3893
• /
• 1975

This work was intended to study the cutting graph and vibratory phenomina of a newly developed mower which may be suitable for mowing agricultural product having large and hard stems like corn and sugar beet. The system consists of cutter-bar having Curvilinear-translation motion, which attached to drag-crank mechanism. The motion of equation developed for experimental vibratory system which equipped with the cutter-bar system was established and the parameters defining the system's vibratory motion were experimentally determined. The optimum balancing weight for the cutter-bar am vibratory characteristics of the cutter-bar for various counterweight were analyzed to provide the design and operational conditions. The results of the study are summarized as follows; (1) The cutting graph by the new cutter-bar system depends upon the magnitude of ratio of forward travel(Vm) to crank speed (R$\omega$); The cutting pitch for Vm/R$\omega$ 1 (whole cycle cutting) and Vm/R$\omega$=2/$\pi$ (a half cycle cutting) are 2$\pi$ Vm and 4R, respectively. (2) The experimental vibratory system had been proved to function adequately so that it can be used in determining the required counterweight to minimize the vibratory motion of cutter-bar. (3) Experimentally determined counterweight to give the least vibratory motion was a little greater than the theoretically determined one. With the optimum counterweight it was possible to reduce up to about 87% of the amplitude without counterweight, which may be considered to be within safe operational region. (4) To avoid the actual operation of the cutter-bar at resonance which occured in low frequency ratio, it was considered that the rotational speed of the crank for a specific design of mower should be determined separately in connection with the desired cutting graph.

• 대한의생명과학회지
• /
• 제11권3호
• /
• pp.397-405
• /
• 2005

Noise may cause damage of the auditory system, hypertension, and cardiovascular disease. However, we haven't the data enough to be available for understanding various effects of noise on the human body. The current study was prospectively designed to investigate the changes of the cardiac factors and cerebral hemodynamics following a transient exposure to noise in young people. 80 subjects (mean aged $23.45\pm2.40$ years) participated in this experiment and were exposed to excavator-noise with 90 decibels for 15 minutes using ear-phone. Cardiac factors such as heart rate (HR), blood pressure (BP) and heart rate-systolic pressure product (RPP), and cerebral hemodynamics such as mean blood flow velocities (Vm), pulsatility indexes (PI), resistance indexes (RI) and mean blood flow velocities at breathing-hold (Vh) in the middle (MCA), anterior (ACA) and posterior cerebral arteries (PCA) were measured before (baseline) and during the noise-exposure. Although there were individual differences in above mentioned parameters, HR, systolic and diastolic BP, RPP, MCA-Vm, MCA-PI, MCA-RI, ACA-Vm, ACA-PI, ACA-RI, PCA-Vm, PCA-PI, and PCA-RI during the noise-exposure decreased compared with the baselines (P<0.05 or P<0.01), The findings of the present study suggest that a transient exposure to excavator-noise at rest causes changes in the cardiac factors and cerebral hemodynamics with individual differences. Further studies need to be carried out for clarifying the effects of longer exposure and combined mental activity with noise exposure.

• 정보과학회 논문지
• /
• 제42권11호
• /
• pp.1322-1331
• /
• 2015

vCPU(virtual CPU)는 하이퍼바이저 스케줄러에 의해서 실행 상태와 정지 상태를 반복하는 특징을 갖는다. 정지 상태인 vCPU에게 전달된 이벤트는 vCPU가 실행 상태가 될 때까지 처리되지 못하고 지연 된다. 이러한 이벤트 지연 현상은 I/O 지연 현상으로 나타난다. SMP(symmetric multiprocessing) 가상 머신은 다수의 vCPU를 이용하기 때문에 이벤트를 어느 vCPU에게 전달하는지에 따라 SMP 가상 머신의 이벤트 지연 시간이 달라 질 수 있다. SMP 가상 머신의 이벤트 지연 시간을 줄이기 위해서 본 논문에서는 각 vCPU의 동작 상태에 따라서 이벤트를 전달하는 새로운 기법인 이벤트 라우팅 기법을 제안한다. 제안한 이벤트 라우팅 기법을 Xen ARM 하이퍼바이저에 적용하였고 다양한 실험 환경에서 네트워크 RTT(round trip time)와 TCP 대역폭 측정을 통해 I/O 지연 시간 감소를 확인하였다. 기존 Xen ARM과 비교하여 네트워크 RTT는 최대 94% 감소하였고, TCP 대역폭은 최대 35% 증가하였다.

• 공업화학
• /
• 제5권2호
• /
• pp.295-304
• /
• 1994

담지촉매인 $Mo-V-O/SnO_2$(VM/Sn)와 $SnO_2/Mo-V-O$(Sn/VM) 촉매를 제조하여 XRD, BET, SEM, $NH_3$, TPD 등으로 특성분석을 실시하였다. 고정층 연속 반응기에서 아크롤레인의 산화반응을 수행한 결과 이들 촉매의 아크롤레인 전화율과 아크릴산 수율이 Mo-V-O 자체보다 높았다. 이와 같은 상승효과의 원인을 TPD, TPR, TPO 등의 방법으로 고찰한 결과 Mo-V-O와 $SnO_2$의 접촉면에서 Mo-V-O가 $SnO_2$ 상으로 전자를 전달하고 $SnO_2$는 spill-over oxygen을 Mo-V-O 상으로 전달함으로써 반응에 의하여 부분환원된 Mo-V-O의 재산화를 촉진시키는 상간협동 현상이 존재하기 때문으로 판단되었다.

• 정보처리학회논문지A
• /
• 제14A권4호
• /
• pp.197-202
• /
• 2007

본 논문에서는 OpenGL-ES 기반의 모바일 3D 블루투스 게임 엔진을 설계 및 구현하였다. 기존 모바일 3D 네트워크 게임에서는 Wap(Wireless Application Protocol)과 VM 방식(Network)을 이용한 무선인터넷 게임이 주류를 이루고 있다. 그러나, 이들 모바일 네트워크 게임의 단점으로 지적되는 무선 네트워크 접속에 따른 지나친 통신 요금의 부담으로 인해 VM 형태를 기반으로 하는 다운로드형 게임 즉, 단독형 게임이 인기를 끌고 있다. 본 논문에서는 이러한 모바일 네트워크 게임의 단점을 해결하기 위해 모바일 3D 표준(C언어 기반)인 OpenGL-ES로 근거리에 있는 사람들이 무선 인터넷에 접속하지 않고, 모바일 3D 네트워크 게임을 즐길수 있는 모바일 3D 블루투스 게임 엔진을 제작하며, 다수의 블루투스 단말기 상에서 패킷 데이터를 전송할 때, 블루투스 처리 속도를 향상시키는 스케줄링(Scheduling) 방법을 제시한다.