• 제목/요약/키워드: VLBI Instrument

검색결과 4건 처리시간 0.029초

Early Science of KVN: 43GHz fringe survey

  • 이상성;;김종수;정태현;손봉원;변도영
    • 천문학회보
    • /
    • 제37권2호
    • /
    • pp.239.1-239.1
    • /
    • 2012
  • This paper presents the results of one of early sciences with Korean VLBI Network (KVN): a large fringe survey of compact radio sources at 43GHz. We established the catalog of correlated flux densities in three ranges of baseline projection lengths of 637 sources from a 43 GHz (Q-band) survey observed with the Korean VLBI Network. Of them, 623 sources have not been observed before at Q-band with VLBI. The goal of this work in the early science phase of the new VLBI array is twofold: to evaluate the performance of the new instrument that operates in a frequency range of 22--129 GHz and to build a list of objects that can be used as targets and as calibrators. We have observed the list of 799 target sources with declinations down to $-40{\circ}$. Among them, 724 were observed before with VLBI at 22 GHz and had correlated flux densities greater than 200 mJy. The overall detection rate is 78%. The detection limit, defined as the minimum flux density for a source to be detected with 90% probability in a single observation, was in a range of 115--180 mJy depending on declination. However, some sources as weak as 70 mJy have been detected. Of 623 detected sources, 33 objects are detected for the first time in VLBI mode. We determined their coordinates with the median formal uncertainty 20 mas. The results of this work set the basis for future efforts to build the complete flux-limited sample of extragalactic sources at frequencies 22 GHz and higher at 3/4 of the celestial sphere.

  • PDF

VLBI 시스템 제어 및 모니터를 위한 멀티드롭 이더넷 기반 IoT 아키텍처 설계 (Multidrop Ethernet based IoT Architecture Design for VLBI System Control and Monitor)

  • 송민규
    • 한국전자통신학회논문지
    • /
    • 제15권6호
    • /
    • pp.1159-1168
    • /
    • 2020
  • 기존에 다수의 인스트루먼트에 대한 제어 및 모니터는 전문화된 영역으로 그 구현에 있어 고가의 전용 모듈을 필요로 하였다. 하지만 최근 임베디드 기술의 발전 속에 M&C(Monitor and Control)를 수행할 수 있는 다양한 제품이 출시되고, 적용 범위가 확대되고 있다. 이에 따라 예전에 비해 소규모의 M&C 환경을 보다 손쉽게 구축할 수 있게 되었다. 본 논문에서는 별도의 하드웨어 제품을 통해 구현해야 했던 VLBI 시스템의 M&C를 저렴한 범용 임베디드 기술로 대체할 수 있는 방안에 대해 논하였다. 메모리 기반의 데이터 송수신 그리고 저장은 비단 VLBI 뿐만 아니라 네트워크 분야에서 일반화된 기술이고, 이더넷을 구성하는 일부 아이템을 VLBI(Very Long Baseline Interferometer) 시스템 환경에 맞게 최적화시킬 경우 보다 효과적인 M&C를 구현할 수 있다. 본 논문에서는 이에 대한 시스템 설계 및 구현 방안을 구체화하였다.

반사 타겟의 관측 오차 특성 분석 - 세종 VLBI IVP 결합 측량 (Characteristics of Measurement Errors due to Reflective Sheet Targets - Surveying for Sejong VLBI IVP Estimation)

  • 홍창기;배태석
    • 한국측량학회지
    • /
    • 제40권4호
    • /
    • pp.325-332
    • /
    • 2022
  • 우주 측지 기술 사이의 상대적인 위치 관계를 설명하는 벡터를 결정하기 위해서는 VLBI IVP (Very Long Baseline Interferometry Invariant Point)의 위치를 정밀하게 계산하여야 한다. 이를 위해 일반적으로 VLBI 안테나에 반사 타겟을 부착한 후 필라들로부터 경사 거리, 수평각, 수직각을 관측한다. 그 다음 단계에서는 관측값과 미지수를 연결하는 수학 모델을 이용하여 조정 계산을 수행하게 된다. 따라서 계산된 미지수는 관측값의 정밀도에 영향을 받게 된다. 이때 특히 문제가 되는 것은 반사 타켓이 일반적인 측량 정밀도를 확보하기 어려운 곳에 위치하고 있다는 점이다. 즉, 반사 타겟의 방향을 조정하여 측량 기기에 정확하게 맞출 수 없다는 것이다. 따라서 이러한 부분은 관측 오차에 또 다른 형태로 나타날 것이며 조정 계산 시 오차 모델링에 오류를 발생시킬 수도 있다. 본 연구에서는 조정 계산 후 계산된 잔차의 특성에 대한 분석을 수행하였다. 먼저 관측 타입별 통계 분석을 통해 정규성을 검정하였으며 분산에 차이가 있는 지에 대한 검정도 실시하였다. 관측 타입별로 등분산 검정을 한 경우 분산이 서로 다른 것으로 나타났다. 각 필라에 대해 관측 타입별 등분산 검정을 했을 때 경사 거리와 수평 및 수직각 사이에는 분산에 차이가 있는 것으로 나타났다. 따라서 결합 측량으로부터 최적의 결과를 얻기 위해서는 관측 오차에 대해 보다 세분화된 모델링이 필요한 것으로 나타났다.

DETERMINATION OF THE INVARIANT POINT OF THE KOREAN VLBI NETWORK RADIO TELESCOPES: FIRST RESULTS AT THE ULSAN AND TAMNA OBSERVATORIES

  • Yoo, Sung-Moon;Jung, Taehyun;Lee, Sung-Mo;Yoon, Ha Su;Park, Han-Earl;Chung, Jong-Kyun;Roh, Kyoung-Min;Wi, Seog Oh;Cho, Jungho;Byun, Do-Young
    • 천문학회지
    • /
    • 제51권5호
    • /
    • pp.143-153
    • /
    • 2018
  • We present the first results of the invariant point (IVP) coordinates of the KVN Ulsan and Tamna radio telescopes. To determine the IVP coordinates in the geocentric frame (ITRF2014), a coordinate transformation method from the local frame, in which it is possible to survey using the optical instrument, to the geocentric frame was adopted. The least-square circles are fitted in three dimensions using the Gauss-Newton method to determine the azimuth and elevation axes in the local frame. The IVP in the local frame is defined as the mean value of the intersection points of the azimuth axis and the orthogonal vector between the azimuth and elevation axes. The geocentric coordinates of the IVP are determined by obtaining the seven transformation parameters between the local frame and the east-north-up (ENU) geodetic frame. The axis-offset between the azimuth and elevation axes is also estimated. To validate the results, the variation of coordinates of the GNSS station installed at KVN Ulsan was compared to the movement of the IVP coordinates over 9 months, showing good agreement in both magnitude and direction. This result will provide an important basis for geodetic and astrometric applications.