• Journal of Korean Association for Spatial Structures
• /
• v.17 no.4
• /
• pp.51-58
• /
• 2017

The characteristics and effectiveness of double tuned mass dampers (DTMD) have been studied by many researchers. DTMD usually consists of one larger mass block and one smaller mass block. In this study, DTMD was proposed to reduce the vibration of vertical pumps in industrial plants. In order to assess the efficiency of the proposed method, numerical analysis for the simplified vertical pump model with single and double TMDs was carried out. It was also investigated that the effects of optimal TMD parameters such as frequency ratio and damping ratio on dynamic responses of the main structure. According to analysis results, DTMD are more effective to control the vibration of the vertical pump and show good robustness to the change in the stiffness of TMD.

• ALGAE
• /
• v.17 no.1
• /
• pp.1-9
• /
• 2002

Diel vertical distribution of phytoflagellates and interactions between the phytoplankton components and environmental and biological factors were studied in a small artificial pond for three days on the December 18, 1998 and April 9 to 10, 1999. The phytoplankton population was dominated by Mallomonas akrokomos of chrysophytes and Cryptomonas marssonii and Chroomonas sp. of cryptophytes. The vertical distribution of these phytoflagellates taxa exhibited clear diel migration pattern. Moreover their migration patterns are showed differential fluctuation between M. akrokomos, C. marssonii and Chroomonas sp. The later two species upward migrated in the evening as well as night, whereas the former species migrated downward. Their distinctive migration pattern was found during the night but was not observed in the morning. During daytime C. marssonii and Chroomonas sp. showed maximum density above 2 m depth but M. akrokomos below 2 m depth. The diel vertical distribution of the dominant phytoflagellates did not show significant correlation between physical, chemical and biotic factors.

• Journal of Mechanical Science and Technology
• /
• v.18 no.5
• /
• pp.762-769
• /
• 2004

An analytical approach is presented to investigate the deformation characteristics of billets in a continuous billet mill using power driven horizontal stands and idle vertical stands. The analysis is validated by comparison to the experimental results in a previously published work. The analytical results have shown that, apart from the problems of slip and buckling of billet, there are some shortcomings involved in this method. Compared to conventional rolling with all driven stands, the roll load for idle vertical stands and the rolling torque for horizontal stands are almost doubled. The billet is severely stressed within the roll-bite of idle vertical stands and the overall rolling power has increased by one third of that for conventional rolling. Theseshortcomings impair the feasibility of industrial application of idle vertical stand rolling method.

• Journal of Korean Neurosurgical Society
• /
• v.52 no.5
• /
• pp.447-451
• /
• 2012

Objective : To characterize the importance of the vertical angle of the sacral curvature (VASC) in lumbar disc herniations. Methods : Morphological data derived from lumbar sagittal MRI imaging. The statistical significance of the findings are discussed. The angles of 60 female patients with lumbar disc herniations (LDH) were compared with the 34 female patients without LDH. Results : 128 of the 185 patients met our inclusion criteria. The vertical angle of sacral curvature is statistically significantly bigger in females with lumbar disc herniations when compared to subjects in control group, 28.32 and 25.4, respectively. (p=0.034<0.05). Same difference was not seen in males. Conclusion : The vertical angle of sagittal sacral curvature may be another risk factor in females with lumbar disc herniations.

• 연구논문집
• /
• s.26
• /
• pp.15-24
• /
• 1996

In this study, we performed the static analysis of a cord-reinforced rubber airspring and generated the three-dimensional half-symmetry model which use the finite-strain shell elements to model the airbag. the three-dimensional hydrostatic fluid elements to model the air-filled cavity, and the rebar elements to model the multi-ply nylon reinforcement of airbag. In addition, a three-dimensional rigid surface is used to define the contact between the airspring and metal bead. The air inside the airspring cavity has been modeled as a compressible fluid satisfying the ideal gas law. The conclusions of this study are as follows. 1) In the pressurization step of analysis, we could predict the change of vertical reaction force, cavity volume and pressure within the airspring. 2) In the second step of analyzing vertical static stiffness, the increase of the vertical load increases the vertical stiffness. 3) In case of changing the angle of nylon cord, the increase the angle of nylon cord increases the vertical stiffness.

• Korean Management Science Review
• /
• v.26 no.3
• /
• pp.67-78
• /
• 2009

In this paper, I analyze the mobile broadband services market characterized by vertical and horizontal differentiation. Vertical differentiation as service quality differentiation is based on the transmission speed of mobile internet service and horizontal differentiation as spatial differentiation is based on the service coverage. Theoretical explanations for the competitive price policy have been developed in the game context of WiBro which represent the high quality within the limited service coverage and HSDPA which represent relatively low quality with nation-wide service. When the WiBro has a mobile broadband service quality advantage and the difference in quality is sufficiently low, the price of WiBro with limited service coverage is relatively lower than that of HSDPA. This occurs because the advantage of WiBro's vertical service differentiation is offset by the disadvantage of horizontal differentiation. The difference in the quality of mobile internet service, however, is not too high, the price of WiBro is relatively higher than that of HSDPA. Moreover, when the service quality of WiBro is sufficiently high, the low quality HSDPA service faces no demand.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2006.04a
• /
• pp.383-386
• /
• 2006

Subsurface temperature is affected by heat advection due to groundwater advection. Temperature-depth profile can be perturbed especially when there are significant vertical groundwater flux caused by external force such as injection or extraction. This research is to clarify the change of subsurface temperature distribution when the 40m x l0m sandy aquifer is stimulated by two different vertical flux($case1:\;{\pm}10^{-5}m^3/s,\;case2:\;{\pm}4{\times}10^{-5}m^3/s$) using a program called HydroGeoSphere. The resulting temperature distribution contour map shows pumping causes vertical attraction of water from deeper and warmer place which result in rising up isotherm. Additionally more injection/extraction rate, more vertical groundwater flux leads to faster Increase in temperature near the pumping well.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2003.04a
• /
• pp.51-54
• /
• 2003

Three kinds of experiments were conducted to test existing methods and develop an effective methodology for the remediation of DNAPL trapped in vertical dead-end fractures. A water-flushing method failed to remove TCE from vertical dead-end fractures where no fluid flow occurs. A water-flushing experiment implies that existing remediation methods, utilizing water-based remedial fluid such as surfactant-enhanced method, have difficulty in removing DNAPL trapped from the vertical downward dead-end fractures, because of no water flow through dead-end fractures, capillary, and gravity forces. Fluid denser than TCE was injected into the fracture network, but did not displace TCE from the vertical dead-end fractures. Base(B on the analysis of the experiments, the increase in the density of the dense fluid and the addition of surfactant to the dense fluid were suggested, and this composite dense fluid with surfactant effectively removed TCE from the vertical dead-end fractures.

• Journal of the Korean Society of Visualization
• /
• v.8 no.1
• /
• pp.13-18
• /
• 2010

An experimental investigation of the flow around a vertical fence was carried out using a PIV velocity field measurement technique. The vertical fence was embedded in a turbulent boundary layer. The instantaneous velocity fields measured at cross-sectional planes reveal complex longitudinal vortices that vary in size and strength, developing from the upstream location. In the instantaneous vorticity and velocity field data, the shear flow separated from the fence top is highly turbulent and shows unsteady flow characteristics. The topography of the ensemble averaged velocity fields, especially the separation bubble formed behind the fence, shows that the spatial distributions of streamwise velocity (U) and vertical (V) are symmetric, the spanwise velocity (W) is skew-symmetric with respect to the central xy-plane(z=0).

• Journal of the Korean Society for Nondestructive Testing
• /
• v.36 no.2
• /
• pp.155-159
• /
• 2016

Eddy current testing (ECT) is an important nondestructive testing technology for the inspection of flaws in conductive materials. However, this widely used technology is not suitable for inspecting lamination when a conventional pancake coil is used because the eddy current (EC) generated by the pancake coil is parallel to the lamination and will not be perturbed. A new method using a rectangular coil placed vertical to the work piece is proposed for lamination detection. The vertical sections of the rectangular coil induce ECs that are vertical to the lamination and can be perturbed by the lamination. A parametric study of a rectangular coil by finite element analysis was performed in order to examine the capability of generating vertical EC.