• Journal of Wetlands Research
• /
• v.14 no.3
• /
• pp.413-418
• /
• 2012

In this study, both habitat use analysis by rumen contents of Eurasian river otter (Lutra lutra) were carried out to investigate the preference of habitat environment and diet using their fecal samples. As the target sites, two streams (the Naechon-cheon and the Koonup-cheon) were selected in the upstream of the Hongcheon river, Hongcheon County, Gangwon Province. A total of 478 track samples (e.g., feces, scent and footprint) were found during the survey periods (May to November, 2009 and November, 2010). The dominant points, where the tracks of river otters were observed, were areas with the low depth(0.5-1m) and the slow flow velocity (5m/sec). Also, both rocks and rock-beds were preferred but artificial facilities were avoided. This ecological study of river otters using habitat use analysis and diet analysis by rumen contents will be useful fundamental information to conserve the river otter populations, and to protect their habitats.

• BMB Reports
• /
• v.28 no.2
• /
• pp.162-169
• /
• 1995

Rat brain succinic semialdehyde dehydrogenase (EC 1.2.1.24 SSADH) activity was detected in mitochondrial, cytosolic and microsomal fractions. Brain mitochondrial soluble SSADH was purified by ammonium sulfate precipitation, DEAE Sephacel, and 5'-AMP Sepharose 4B affinity chromatography. The purified enzyme was shown to consist of four identical subunits, and the molecular weight of a subunit was 55 kD. The $K_m$ for short chain aliphatic aldehydes and aromatic aldehydes were at the $10^{-3}M$ level but that for succinic semialdehyde was 2.2 ${\mu}M$. Either $NAD^+$ or $NADP^+$ can be used as a cofactor but the affinity for $NAD^+$ was 10 times higher than that for $NADP^+$. The brain cytosolic SSADH was also purified by ammonium sulfate precipitation, DEAE Sephacel, Blue Sepharose CL-6B and 5'-AMP Sepharose 4B affinity chromatography and its Km for short chain aliphatic aldehydes was at the $10^{-3}$ level but that for succinic semialdehyde was 3.3 ${\mu}M$. $NAD^+$ can be used as a cofactor for this enzyme. We suppose that both enzyme might participate in the oxidation of succinic semialdehyde, which is produced during GABA metabolism. The activity of both cytosolic and mitochondrial SSADH was markedly inhibited when the concentration of succinic semialdehyde was high. The reciprocal plot pattern of product inhibition and initial velocity indicated a sequential ordered mechanism for mitochondrial matrix SSADH. Chemical modification data suggested that amino acid residues such as cysteine, serine and lysine might participate in the SSADH reaction.

• Journal of Korea Multimedia Society
• /
• v.4 no.3
• /
• pp.257-269
• /
• 2001

Because of increasing number of integrated circuit, there is many tries of making chip of neural network and some chip is exit. but this is not prefer because YLSI technology can't support so large hardware. So imitation of whole system of neural network is more prefer. There is common procedure in signal processing as in the neural network and pattern recognition. That is multiplication of large amount of signal and reading LUT. This is identical with some operation of MLP, and need iterative and large amount of calculation, so if we make this part with hardware, overall system's velocity will be improved. So in this paper, we design neutral network, not neuron which can be used to many other fields. We realize this part by following separated bits addition method, and it can be appled in the real time parallel process processing.

• The Journal of the Korea Contents Association
• /
• v.11 no.4
• /
• pp.207-214
• /
• 2011

The purpose of this study was to investigate effect of feedback methods and ambulatory assistive aids on accuracy of partial weight bearing in healthy adults. Twenty subjects were recruited and trained to 30% weight bearing of body weight (BW) using 3-point gait crutches and wheeled walker pattern. Dynamic feedback group (n=11) was received dynamic postresponse feedback and static group (n=9) received static feedback. Force plate was used to measure %BW and GAITRite used to measure gait parameters in immediately and after 3 days of training. Immediately after training, there was not significantly at 30%BW target load in dynamic group with crutch gait (p>.05). There were significantly differences in %BW according to feedback methods and ambulatory aids (p<.05). There was not significant difference between immediately and after 3 days of training (p>0.05). There were significantly differences in gait velocity and stance ratio between crutches and wheeled walker gait (p<.05). Thus, it was suggested that if possible, use crutches, training for partial weight bearing via dynamic feedback is necessary.

• 한국전산유체공학회:학술대회논문집
• /
• 2005.10a
• /
• pp.93-97
• /
• 2005

Air interlacing serves to protect the yarn against damage, strengthens inter-filament compactness or cohesion, and ensures fabric consistency. The air interlacing nozzle is used to introduce intermittent nips to a filament yarn so as to improve its performance in textile processing. This study investigates the effect of interlacing nozzle geometry on the interlacing process. The geometries of interlacing nozzles with multiple air inlets located across the width of a yarn channels are investigated. The basic interlacing nozzle is the yarn channel, with a perpendicular single air inlet in the middle. The yarn channel shapes are cross sections with semicircular or rectangular shapes. This paper presents three doubled sub air inlets with main air inlet and one of them is slightly inclined doubled sub air inlets with main air inlet. The compressed air coming out from the inlet hits the opposing wall of the yarn channel, divides into two branches, flows trough the top side of yarn channel, joins with the compressed air coming out from the sub air inlet and then creates two free jets at both ends of the yarn channel. The compressed air moves in the shape of two opposing directional vortices. The CFD-FASTRAN was used to perform steady simulations of impinging jet flow inside of the interlace nozzles. The vortical structure and the flow pattern such as pressure contour, particle traces, velocity vector plots inside of interlace nozzle geometry are discussed in this paper.

• 한국해양학회지
• /
• v.9 no.2
• /
• pp.19-30
• /
• 1974

Current observations were carried out in Jinhae Bay area during the period of January to February 1974. The data were synthetically analyzed and the characteristics of the water movement in Jinhae Bay were studied. The water movement in Jinhae Bay area is a reversing tidal current type and the Semi- diurnal tidal current is predominant. The ebb current begins at about high water time and the strongest current occurs at about 3 hour after high water. The flood current begins at 0.2-1.0 hour before low water and the strongest current occurs at about 3-4 hour after low water. The main ebb current flows to SE direction with the maximum welocity, about 100cm/sec and the lood flows to NW with the maximum velocity, about 70cm/sec. Generally, the ebb current in Jinhae Bay is more predominat than the flood current except at the west and the north coast area of Gadeog-do where the flood current is more predominant.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.8
• /
• pp.915-921
• /
• 2007

As a preliminary measurement of siloxanes in landfill gas(LFG), this study was conducted to determine the best suitable solvent applicable to the extraction of siloxanes in the domestic landfill using liquid-absorption method. Three solvents of n-hexane, acetone, and methanol were tested and the results obtained from GC analysis for each solvent were compared to their properties. Results showed that the resolution in the GC spectrum was the best from methanol due to the lack of overlapping of the peaks between silane and solvent. The detected siloxanes concentration were varied at maximum 2.6 times depending on the types of solvent as well as extraction velocity and impinger steps. In total, the highest concentration of siloxanes was obtained from methanol, which showed ideal pattern in the absorption of each impinger step and the least relative standard deviation. Accordingly, it is concluded that methanol is the most suitable solvent for the extraction of siloxanes in the domestic landfill. However, it is considered that solvent suitability can vary depending on the waste components and landfill record in landfills.

• Environmental Engineering Research
• /
• v.14 no.3
• /
• pp.164-169
• /
• 2009

A powder form of aluminum (hydr)oxides is not suitable in wastewater treatment/filtration systems because of low hydraulic conductivity and large sludge production. In this study, aluminum (hydr)oxide-coated sand (AOCS) was used to remove phosphate from aqueous solution. The properties of AOCS were analyzed using a scanning electron microscopy (SEM) combined with an energy dispersive X-ray spectrometer (EDS) and an X-ray diffractometer (XRD). Kinetic batch, equilibrium batch, and closed-loop column experiments were performed to examine the adsorption of phosphate to AOCS. The XRD pattern indicated that the powder form of aluminum (hydr)oxides coated on AOCS was similar to a low crystalline boehmite. Kinetic batch experiments demonstrated that P adsorption to AOCS reached equilibrium after 24 h of reaction time. The kinetic sorption data were described well by the pseudo second-order kinetic sorption model, which determined the amount of P adsorbed at equilibrium ($q_e$ = 0.118 mg/g) and the pseudo second-order velocity constant (k = 0.0036 g/mg/h) at initial P concentration of 25 mg/L. The equilibrium batch data were fitted well to the Freundlich isotherm model, which quantified the distribution coefficient ($K_F$ = 0.083 L/g), and the Freundlich constant (1/n = 0.339). The closed-loop column experiments showed that the phosphate removal percent decreased from 89.1 to 41.9% with increasing initial pH from 4.82 to 9.53. The adsorption capacity determined from the closed-loop experiment was 0.239 mg/g at initial pH 7.0, which is about two times greater than that ($q_e$ = 0.118 mg/g) from the kinetic batch experiment at the same condition.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.6 no.4
• /
• pp.67-82
• /
• 2003

A 2-dimensional hydrodynamic model has been applied to understand water circulation pattern in Lake Deacheong. The simulation results have been used in sediment transport modeling. A sediment transport model using a particle tracking method has been developed to simulate sediment transport in the ocean, river and reservoir. The model was applied to estimate transport track of particulate pollutants in the lake. The hydrodynamic model was verified for water level variations and showed good agreements. Through the results we found out that water velocity is less than 5 cnysec for mean yearly flow and more than 120 cnysec at some points for the simulated flood flow. The incoming sediment particles in flood season reached into the Daecheong Dam. But the incoming sediment particles in the mean flow were settled down at riverbed and didn't move into the dam. These results can be used in setting up water quality management plan in the lake.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.14 no.4
• /
• pp.339-345
• /
• 2008

The stratified flow can be seen in the oil and gas pipelines as well as pipelines related to ship's fluid machineries. Numerous theories and correlations have also been proposed in the past for the prediction of stratified flow in horizontal or slightly inclined pipe. The previous researches are mostly about the effects of physical properties, viscosity, phases densities and pipe geometries on the stratified flow. Very few study outcomes exist on the effect of gravity magnitude and large slop angle of pipe inclinations on the occurring condition of stratified flow. In this study, therefore, analytical procedures were conducted about the effect of both the change in the gravity magnitude and pipe inclinations on the stratified flow occurring conditions. From the analytical results, it was found that stratified flow occurred at the vertical upward inclination and at very low liquid phase flowrates in 0.17g and 0.33g conditions.