• Food Science of Animal Resources
• /
• v.43 no.4
• /
• pp.553-562
• /
• 2023

With an increase in meat consumption, the need to measure the weight of each primal cut of pork has increased. Recently, automation devices have been used to measure the weight of each primal cut of pork. The objective of this study was to investigate the accuracy of VCS2000, one of the non-invasive pig carcass analyzers. Production levels of 7 primal cuts of 50 pigs were measured with VCS2000. Average error rates between dissected value for each primal cut and VCS2000 measurement values of ham, shoulder picnic, belly, loin, and shoulder blade were around 5%. Average error rates for spare rib and tenderloin were about 10%. Correlation coefficients between the dissected value and the VCS2000 measured value for ham, shoulder picnic, loin, belly, and shoulder blade were high at 0.66-0.83. Correlation coefficients of spare rib and tenderloin were low at 0.35 and 0.47. Coefficient of determination of the VCS2000 measured value for each primal cut by regression analysis was 0.77 or more for ham, shoulder picnic, loin, and shoulder blade and 0.63 for belly. Coefficients of determination for spare rib and tenderloin were low at 0.40 and 0.27. In addition, the coefficient of determination of VCS2000 for each primal cut was higher than that of the dissected value for all primal cuts. In conclusion, pig carcass analysis using the VCS2000 has a high reliability for pork cuts with high production levels, but a relatively low reliability for pork cuts with low production levels and high fat levels.

• KAPE Magazine
• /
• s.250
• /
• pp.21-23
• /
• 2017

• Food Science of Animal Resources
• /
• v.38 no.5
• /
• pp.1109-1119
• /
• 2018

In this paper, we report the development of a nondestructive prediction model for lean meat percentage (LMP) in Korean pig carcasses and in the major cuts using a machine vision technique. A popular vision system in the meat industry, the VCS2000 was installed in a modern Korean slaughterhouse, and the images of half carcasses were captured using three cameras from 175 selected pork carcasses (86 castrated males and 89 females). The imaged carcasses were divided into calibration (n=135) and validation (n=39) sets and a multilinear regression (MLR) analysis was utilized to develop the prediction equation from the calibration set. The efficiency of the prediction equation was then evaluated by an independent validation set. We found that the prediction equation - developed to estimate LMP in whole carcasses based on six variables - was characterized by a coefficient of determination ($R^2_v$) value of 0.77 (root-mean square error [RMSEV] of 2.12%). In addition, the predicted LMP values for the major cuts: ham, belly, and shoulder exhibited $R^2_v$ values${\geq}0.8$ (0.73 for loin parts) with low RMSEV values. However, lower accuracy ($R^2_v=0.67$) was achieved for tenderloin cuts. These results indicate that the LMP in Korean pig carcasses and major cuts can be predicted successfully using the VCS2000-based prediction equation developed here. The ultimate advantages of this technique are compatibility and speed, as the VCS2000 imaging system can be installed in any slaughterhouse with minor modifications to facilitate the on-line and real-time prediction of LMP in pig carcasses.

• Journal of Animal Science and Technology
• /
• v.66 no.4
• /
• pp.834-845
• /
• 2024

Currently, in pork auctions in Korea, only carcass weight and backfat thickness provide information on meat quantity, while the production volume of primal cuts and fat contents remains largely unknown. This study aims to predict the production of primal cuts in pigs and investigate how these carcass traits affect pricing. Using the VCS2000, the production of shoulder blade, loin, belly, shoulder picnic, and ham was measured for gilts (17,257 pigs) and barrows (16,365 pigs) of LYD (Landrace × Yorkshire × Duroc) pigs. Single and multiple regression analysis were conducted to analyze the relationship between the primal cuts and carcass weight. The study also examined the correlation between each primal cut, backfat thickness (1st thoracic vertebra backfat thickness, grading backfat thickness, and Multi-brached muscle middle backfat thickness), pork belly fat percentage, total fat yield, and auction price. A multiple regression analysis was conducted between the carcass traits that showed a high correlation and the auction price. After conducting a single regression analysis on the primal cuts of gilt and barrow, all coefficients of determination (R²) were 0.77 or higher. In the multiple regression analysis, the R² value was 0.98 or higher. The correlation coefficient between the carcass weights and the auction price exceeded 0.70, while the correlation coefficients between the primal cuts and the auction prices were above 0.65. In terms of fat content, the backfat thickness of gilt exhibited a correlation coefficient of 0.70, and all other items had a correlation coefficient of 0.47 or higher. The correlation coefficients between the Forequarter, Middle, and Hindquarter and the auction price were 0.62 or higher. The R² values of the multiple regression analysis between carcass traits and auction price were 0.5 or higher for gilts and 0.4 or higher for barrows. The regression equations between carcass weight and primal cuts derived in this study exhibited high determination coefficients, suggesting that they could serve as reliable means to predict primal cut production from pig carcasses. Elucidating the correlation between primal cuts, fat contents and auction prices can provide economic indicators for pork and assist in guiding the direction of pig farming.

• Journal of the Institute of Convergence Signal Processing
• /
• v.14 no.4
• /
• pp.261-269
• /
• 2013

This paper describes the design and development of VSI (VLBI standard interface) optical adapter for transmitting VLBI(Very long baseline interferometry) observation data with optical signal. VSI cable comprised of 80-line is being used for observed data transmission with maximum length of 5-meter between playbacks (Mark5B, VERA2000) and raw VLBI data buffer (RVDB), RVDB and VLBI correlation subsystem (VCS) in Daejeon correlator. It has a plan to conduct the data processing for 16-stations and introduce the 14 RVDB systems in near future. And data loss frequently occurred because of trouble of VSI cable MDR80 connector. By considering the data loss by connector error of VSI cable, RVDB system extension plan, effective space usage and long distance data transmission(e-VLBI), the VSI optical adapter was proposed and developed for effectively transmitting and receiving VLBI data through optical signal. In order to confirming the performance of developed VSI optical adapter, the experiments for data transmission was conducted between playback and RVDB system, and confirmed that data transmission was clearly done without any data loss.

• The Bulletin of The Korean Astronomical Society
• /
• v.35 no.1
• /
• pp.44.1-44.1
• /
• 2010

한국천문연구원에서는 2009년 1단계 한일공동VLBI상관기(Korea-Japan Joint VLBI Correlator, KJJVC)의 개발과 설치를 완료하였다. KJJVC는 한국우주전파관측망(Korean VLBI Network, KVN), KVN과 일본 내의 VLBI 관측망을 포함하는 한일공동VLBI관측망(Korea-Japan Joint VLBI Network, KJJVN), 그리고 한중일의 VLBI관측망인 동아시아 VLBI관측망(East Asian VLBI Network, EAVN)으로 관측한 VLBI 데이터를 상관처리할 수 있도록 설계 제작되었다. 그리고 고속재생기, 데이터 동기재생처리시스템(Raw VLBI Data Buffer, RVDB), VLBI상관서브시스템(VLBI Correlation Subsystem, VCS), 데이터 아카이브 시스템(Peta-scale Epoch Data Archive, PEDA)로 구성된다. 특히 일본국립천문대 VERA에서는 테이프 형태의 DIR2000 고속기록기를 사용하고 있는데, DIR2000의 제품단종으로 인해 이 데이터를 VCS에 재생하기 위해 DIR1000을 개량한 VERA2000 고속재생기를 개발하였다. 즉, VSI 형태의 데이터를 1Gbps 속도로 재생만 하기 위해 기존의 시스템을 개량하였으며, 2009년 10월에 VLBI상관기실에 설치되었다. 본 논문에서는 VERA2000 시스템의 구성 및 개발, 시험운영 등에 대해 간략히 소개하고자 한다.

• Journal of KIISE:Information Networking
• /
• v.27 no.3
• /
• pp.348-359
• /
• 2000

Most of the important real time multimedia applications require multipoint transmissions. To support these applications in ATM based Intermet environments, it is important to provide efficient IP multicast transportations over ATM networks. IETF proposed MARS(Multicast Address Resolution Server) as the service architecture to transport connectionless IP multicast flows over connection oriented ATM VCs. MARS assumes UNI3.0/3.1 signalling. Since UNI3.0/3.1 does not provide any means for receivers to request a join for a multicast ATM VC, MARS provides overlay service to relay join request from IP multicast group members to the sources of the multicast group. Later on, ATM Forum standardized UNI4.0 signalling which is provisioned with a new signalling mechanism called LIJ(Leaf Initiated Join). LIJ enables receivers to directly signal the source of an ATM VC to join. In this paper, we propose a new service architecture providing IP multicast flow transportation over ATM networks deploying UNI4.0 signalling. The proposed architecture is named UNI4MARS. It comprises service components same as those of the MARS. The main functionality provided by the UNI4MARS is to provide source information to the receivers so that the receivers may exploit LIJ to join multicast ATM VCs dynamically. The implementation overhead of UNI4MARS and that of MARS are compared by a course of simulations. The simulation results show that the UNI4MARS supports the dynamic IP multicast group changes more efficiently with respect to processing, memory and bandwidth overhead.