• 한국작물학회지
• /
• 제62권2호
• /
• pp.79-86
• /
• 2017

본 연구는 전남지역 시군에서 생산, 유통되고 있는 브랜드쌀의 품질평가를 실시하여 연차간 변이와 유통쌀의 품질에 미치는 요인을 분석하고자 수행되었으며 그 결과는 다음과 같다. 1. 전남의 연중 브랜드쌀 품질 변이는 도요윤기치 3.1%, 백도 2.1%, 단백질함량 1.6%, 수분함량 1.0%, 완전미율 0.4% 순으로 컸고 4월 이후부터 품질특성이 저하되었다. 2. 연차별 브랜드쌀 품질 변이는 단백질함량(5.6%), 도요윤기치(5.2%)가 컸고 백도(2.7%), 완전미율(1.8%)은 상대적으로 낮았다. 3. 식미치와 단백질함량은 최저기온, 일조시간, 강수량, 일교차와 높은 상관을 보였고 완전미율은 일교차와 부의 상관을, 분상질립율은 강수량과 높은 정의 상관을 보였다. 4. 단백질함량, 수분함량, 백도, 완전미율 등 밥맛과 상관이 높은 항목을 이용한 식미추정회귀식 산정 결과 y = - 6.71a + 2.27b + 1.29c + 0.51d - 15.34 ($R^2$=0.51*)이었으며 이 때 y는 관능식미, a는 단백질함량(%), b는 수분함량(%), c는 백도, d는 완전미율(%)이었다.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제49권8호
• /
• pp.551-556
• /
• 2000

A zero-voltage-switching(ZVS) programmable power supply employing the ZVS active clamp forward converter is suggested. Through the analysis on operation region of the supply, the constant power region and the maximum current limit region are clearly identified. Furthermore, the duty ratio range corresponding to the variation range of the output voltages and the control scheme at the minimum duty ration region are presented. Finally, in order to vefity the validity of the operation for the proposed power supply, experimental evaluation results obtained on an 1kW prototype power supply for the 198~242VAC input voltage range(220VAC$\pm$10%), the 0~25V output voltage range, and the 100kHz switching frequency are presented.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 A
• /
• pp.434-436
• /
• 1996

This paper investigates the optimal design of an electronic ballast of half bridge inverter type in consideration of the variation of ambient temperatures for a 15[W] triple-type compact fluorescent lamp. The performances of electronic ballasts under different values or the capacitance ratio in the resonant tank circuit are compared with each other in the practical temperature range between 15[$^{\circ}C$] and 35[$^{\circ}C$] to determine its optimum value. As a result, the optimum value is found to be such that $C_1/C_2=10$ at which value starting of the lamp is most stable and light output reaches its maximum value with lowest variation.

• ETRI Journal
• /
• 제22권1호
• /
• pp.12-19
• /
• 2000

Wireless communication systems using airship have been proposed in worldwide. The airship will be located at the stratosphere about $20{\sim}23\;km$ above the sea level. The position of airship will vary within the station keeping range with time due to the drag of the wind in the stratosphere. When the earth station antenna has a high gain without the tracking function, the antenna performance may be degraded by a small variation of the airship. This means that variation of airship location could result in serious degradation of the system performance. In this paper, degradation in earth station's Equivalent Isotropic Radiated Power (EIRP) and Gain to noise Temperature ratio (G/T) due to the stratospheric platform movements has been derived by calculating the deviation angle of the main beam directions between the earth station and the platform antenna. In this case, the antenna of the earth station has been assumed circular and/or patch array antennas.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 B
• /
• pp.1416-1418
• /
• 2005

This paper presents a new hybrid control method of asymmetrical half-bridge converter(AHBC) with low voltage stresses of the diodes and interleaved PFC(power factor correction). The proposed new control scheme can observe variation of secondary diodes voltage stresses by variation of duty ratio and then decide the control portions which are asymmetrical control and PFM(Pulse Frequency Modulation). Therefore, the proposed control scheme has many advantages such as a low rated voltage of the secondary diodes, low conduction loss according to the low voltage drop and wide zvs range by load variation. Through simulation results, the validity of the proposed control scheme is demonstrated.

• 한국건설순환자원학회논문집
• /
• 제6권2호
• /
• pp.138-145
• /
• 2018

이 연구에서는 UHPFRC의 주요 재료특성관련 설계변수로써 UHPFRC의 인장강도의 변동, 탄성계수의 변동 및 인장철근비의 변동이 UHPFRC의 휨강도에 미치는 영향을 해석적으로 파악하고자 하였다. UHPFRC의 인장강도 변동량이 ${\pm}20%$일 때 휨강도 예측 결과는 ${\pm}8{\sim}9%$ 수준의 휨강도 변동을 나타낸다. 수치 해석 결과는 UHPFRC의 인장강도의 변동이 휨강도 예측 수준에 큰 영향을 미치는 것을 나타낸다. 탄성계수 변동에 따른 휨모멘트-곡률 곡선 예측 결과는 곡선의 기울기, 즉 휨강성의 차이를 나타내고, 휨강도는 뚜렷한 차이를 나타내지 않는다. 한편, 철근항복강도가 400MPa인 경우, 철근비가 0.5%일 때에 비해 철근비가 1.0, 1.5 및 2.0%일 때 SC120f의 휨강도는 각각 30, 67 및 99%만큼 증가한다. 또한, 철근비가 0.5%일 때에 비해 철근비가 1.0, 1.5 및 2.0%일 때 SC150f의 휨강도는 각각 29, 57 및 86%만큼 증가하고, SC180f의 휨강도는 각각 25, 50 및 70%만큼 증가하였다. 따라서 철근비 변동에 따라 UHPFRC의 휨강도는 큰 영향을 받음을 나타내고, 콘크리트 설계기준 압축강도가 클수록 철근비 증가에 따른 휨강도 증가율은 더 작음을 나타낸다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 춘계학술대회논문집
• /
• pp.442-448
• /
• 2008

This paper presents an approach to define an optimal piezoactuator length to actively control structural vibration. The optimal ratio of the piezoactuator length against beam length when a pair of piezoceramic actuator and accelerometer is used to suppress unwanted vibration with direct velocity feedback (DVFB) control strategy is not clearly defined so far. It is well known that direct velocity feedback (DVFB) control can be very useful when a pair of sensor and actuator is collocated on structures with a high gain and excellent stability. It is considered that three different collocated pairs of piezoelectric actuators (20, 50 and 100 mm) and accelerometers installed on three identical clamped-clamped beams (300 * 20 * 1 mm). The response of each sensor-actuator pair requires strictly positive real (SPR) property to apply a high feedback gain. However the length of the piezoactuator affects SPR property of the sensor-actuator response. Intensive simulation and experiment shows the effect of the actuator length variation is strongly related with the frequency range of SPR property. A shorter actuator gave a wider SPR frequency range as a longer one had a narrower range. The shorter actuator showed limited control performance in spite of a higher gain was applied because the actuation force was relatively small. Thus an optimal length ratio (actuator length/beam length) was suggested to obtain relevant performance with good stability with DVFB strategy. The result of this investigation could give important information in the design of active control system to suppress unwanted vibration of smart structures with piezoelectric actuators and accelerometers.

• 한국결정성장학회지
• /
• 제28권2호
• /
• pp.63-68
• /
• 2018

Natural convection of a two dimensional laminar steady-state incompressible fluid flow in a rectangular enclosure has been investigated numerically for low aspect ratios with the physical vapor transport crystal growth. Results show that for aspect ratio (Ar = L/H) range of $0.1{\leq}Ar{\leq}1.5$, with the increase in Grashof number by one order of magnitude, the total mass flux is much augmented, and is exponentially decayed with the aspect ratio. Velocity and temperature profiles are presented at the mid-width of the rectangular enclosure. It is found that the effect of Grashof number on mass transfer is less significant when the enclosure is shallow (Ar = 0.1) and the influence of aspect ratio is stranger when the enclosure is tall and the Grashof number is high. Therefore, the convective phenomena are greatly affected by the variation of aspect ratios.

• 지구물리와물리탐사
• /
• 제13권2호
• /
• pp.144-152
• /
• 2010

제주도 화산암 두께변화를 연구하기 위하여, 단주기와 광대역 지진계를 각각 8개와 4개 조사지 지표에 설치하여 상시미동 자료를 30 ~ 60분 동안 100 Hz 샘플률로 기록하였다. 인공잡음은 주간자료의 1.8 Hz 이상에서 나타나는 반면, 자연잡음은 0.4 ~ 0.8 Hz 범위에서 주간 및 야간 기록자료 모두에 기록되어 나타난다. H/V 스펙트럼비를 이용하여 구한 우세주파수는 0.2 ~ 0.7 Hz 범위에 분포한다. 우세주파수는 한라산 중심부로 갈수록 점진적으로 작은 값을 보여, 기존의 중력 및 자력모델의 결과처럼 제주도의 기반암이 섬 중심부 아래로 휜 구조임을 반영한다. 기반암 상부 현무암의 평균 횡파속도를 1,800 m/s로 가정할 경우, 각 조사지의 기반암 깊이는 약 640 ~ 2,140 m 정도로 평가된다.

• 대한조선학회지
• /
• 제3권1호
• /
• pp.11-18
• /
• 1966

In a polarized light field, triangular plate bracket specimen of CR-39 with lightening hole were subjected to tension. The variables of the models used in the experiment were taken in the range of length-depth $ratio=0.583{\sim}1.715$, eccentricity of lightening hole from the geometrical center of $bracket=-1/4"{\sim}+1/4"$, and the lightening hole $diameter=1/2"{\sim}2"$. The isoclinics were drawn and from those the stress trajectories were constructed. Then the distributions of boundary stress around the lightening holes were determined from the isochromatic fringe pattern. The conclusions reached in this investigation are as follows: 1. Maximum stresses of the hole boundary are gradually increased when the diameter of the lightning hole increase. 2. Maximum stresses of the lightning hole boundary are decreased gradually when the eccentricity of the lightning hole from the geometrical center of the bracket to the farther side from the free end. 3. If the minimum distances from the free end of the brackets to the lightening hole boundaries are equal, the variation of the maximum stresses are in a small range for the change of lightening hole diameter and its location. 4. When the length-depth ratios are smaller than 0.8, the maximum stresses increase steeply. In the range of $0.8{\sim}1.2$ maximum stresses increase gradually and thereafter increase rapidly when the length-depth ratio of the bracket increase for the same diameter of a lightening hole.