• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.6
• /
• pp.1171-1176
• /
• 2016

VANET are a special kind of MANET adapted to the communications between vehicles. In this work, we propose the models used for representing the communication among vehicles, vehicles mobility features, and VANET simulator using realistic vehicular mobility models. VANET requires that a traffic and network simulator should be used together to perform this test. But, simulator tool has been preferred over traffic simulation because it simple, easy and cheap. Goal of this paper is to create a simulation of Vehicular Ad-Hoc network for urban scenario which can be used for testing purposes. Such environment can be used while designing better MAC protocols in VANETs. We are evaluating the performance of two routing protocols namely AODV and DSDV. The comparison was based on the throughout, packet loss and end-to-end delay. We found that DSDV has less throughput performance and high routing overhead than AODV. On average end-to-end delay and packet loss, AODV performs better than DSDV.

• Journal of the Korea Society of Computer and Information
• /
• v.29 no.8
• /
• pp.113-122
• /
• 2024

In this paper, we conducted a thorough investigation of existing simulators for running simulations of Vehicular Adhoc Networks (VANET) in realistic road environments, such as digital twins. After careful consideration, we chose a simulator that combines OSM (OpenStreetMap), SUMO (Simulation of Urban MObility), and OMNeT++ due to its open-source nature and efficient performance. Using this integrated simulator, we carried out VANET simulations in both simple virtual road environments and realistic road environments. Our findings revealed significant differences in VANET performance between the two types of environments, emphasizing the need to consider realistic road and traffic environments for reliable VANET operation. Furthermore, our simulations demonstrated significant performance variability, with performance degradation observed as vehicle density decreased and dynamic changes in network topology increased. These results underscore the importance of digital twin-based approaches in VANET research, highlighting the need to simulate real-world road and traffic conditions rather than relying on simple virtual road environments.

• Journal of Multimedia Information System
• /
• v.6 no.2
• /
• pp.61-66
• /
• 2019

VANET (Vehicular Ad-hoc Network) is a mobile Ad-hoc Network which deals with the moving vehicles. VANET supports Intelligent Transport Systems (ITS) which is related to different modes of transport and traffic management techniques. VANETs enabled users to be informed and make them safer. VANET uses IEEE 802.11p standard wireless access protocol for communication. An important and necessary issue of VANET is to design routing protocols. In a network, communication takes place by the use of the routing protocols. There are mainly two types of communications used such as Vehicle to Vehicle (V2V) and Vehicle to Infrastructure (V2I) in VANET. Vehicles can send and receive messages among them and also to and from infrastructure used. In this paper, AODV, DSR and DSDV are compared by analysing the results of simulation on various metrics such as average throughput, instant throughput, packet delivery ratio and residual energy. Findings indicates utilization of AODV and DSR is more applicable for these metrics as compared to DSDV. A network simulator (NS2) is used for simulation.

• International Journal of Computer Science & Network Security
• /
• v.24 no.9
• /
• pp.195-201
• /
• 2024

Vehicular Ad-hoc Networks (VANETs) became very popular in few years and it has been widely used in research and industry communities. VANET is a collection of wireless vehicle nodes forming a temporary network without using any centralized Road Side Unit (RSU). VANET is a subset of Mobile Adhoc Networks (MANET). It improves the safety of vehicles. It also supports Intelligent Transportation Systems.Routing is the major component of communication protocols in VANETs. Packets are to be routed from the source node to destination node. Because of frequent topology changes and routing overhead, selection of routing protocol in VANET is a great challenge. There are various routing protocols available for VANET. This paper involves study of Temporally Ordered Routing protocol (TORA) and performance metrics are analyzed with the help of NS2 Simulator.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.3
• /
• pp.1213-1237
• /
• 2019

Vehicular Ad-hoc Network (VANET) facilities envision future Intelligent Transporting Systems (ITSs) by providing inter-vehicle communication for metrics such as road surveillance, traffic information, and road condition. In recent years, vehicle manufacturers, researchers and academicians have devoted significant attention to vehicular communication technology because of its highly dynamic connectivity and self-organized, decentralized networking characteristics. However, due to VANET's high mobility, dynamic network topology and low communication coverage, dissemination of large data packets (e.g. multimedia content) is challenging. Clustering enhances network performance by maintaining communication link stability, sharing network resources and efficiently using bandwidth among nodes. This paper proposes a mobility-based, multi-hop clustering algorithm, (MBCA) for multimedia content broadcasting over an IEEE 802.11p-LTE-enabled hybrid VANET architecture. The OMNeT++ network simulator and a SUMO traffic generator are used to simulate a network scenario. The simulation results indicate that the proposed clustering algorithm over a hybrid VANET architecture improves the overall network stability and performance, resulting in an overall 20% increased cluster head duration, 20% increased cluster member duration, lower cluster overhead, 15% improved data packet delivery ratio and lower network delay from the referenced schemes [46], [47] and [50] during multimedia content dissemination over VANET.

• Journal of information and communication convergence engineering
• /
• v.8 no.6
• /
• pp.623-629
• /
• 2010

A geographical routing protocol is typically utilized for a route selection of VANET. Even if it is conceptually well adapted into VANET, message delivery tends to be unreliable with frequent network partitions, which mainly come from the inherent characteristics such as high mobility and irregular traffic density. In this paper, we deal with a method to enable reliable message delivery with reflecting the traffic density on routing decision. By concatenating the message delivery cost of each of inbetween junction section, $1^{st}$ and $2^{nd}$ shortest paths are initially determined. When it is not possible to deliver the message on a junction on the 1st path, we utilize two novel ideas, that is, letting the message stay on the junction to find out a new relay node, and putting a replicated copy to reach via a detour path. By using the NS-2 network simulator, our method has been examined in terms of message delivery rate and delay. It shows that our method is much efficient than the other method in the low density environment, while it brings similar results in the high density environment.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.18 no.4
• /
• pp.23-30
• /
• 2022

Recently, traffic congestion and environmental pollution have occurred due to population concentration and vehicle increase in large cities. Various studies are being conducted to solve these problems. Most of the traffic congestion in cities is caused by traffic signals at intersections. This paper proposes a dynamic traffic light control (DTLC) scheme to support safe vehicle operation and smooth traffic flow using real-time traffic information based on VANET. DTLC receives instantaneous speed and directional information of each vehicle through road side units (RSUs) to obtain the density and average speed of vehicles for each direction. RSUs deliver this information to traffic light controllers (TLCs), which utilize it to dynamically control traffic lights at intersections. To demonstrate the validity of DTLC, simulations were performed on average driving speed and average waiting time using the ns-2 simulator. Simulation results show that DTLC can provide smooth traffic flow by increasing average driving speed at dense intersections and reducing average waiting time.

• International Journal of Computer Science & Network Security
• /
• v.22 no.7
• /
• pp.157-164
• /
• 2022

The proposed privacy preserving scheme has identified the drawbacks of existing schemes in Vehicular Networks. This prototype enhances the number of nodes by decreasing the cluster size. This algorithm is integrated with the whale optimization algorithm and Block Chain Technology. A set of results are done through the NS-2 simulator in the direction to check the effectiveness of proposed algorithm. The proposed method shows better results than with the existing techniques in terms of Delay, Drop, Delivery ratio, Overhead, throughout under the denial of attack.

• Journal of Korean Society of Transportation
• /
• v.28 no.4
• /
• pp.107-118
• /
• 2010

Wireless communication technologies including vehicle-to-vehicle (V2V) and vehicle-to-infrastructure (V2I) enable the development of more sophisticated and effective traffic information systems. This study presents a method to estimate vehicular travel times in a vehicular ad hoc network (VANET) environment. A novel feature of the proposed method is estimating individual vehicle travel times through advanced on-board units in each vehicle, referred to as self-estimated travel time in this study. The method uses travel information including vehicle position and speed at each given time step transmitted through the V2V and V2I communications. Vehicle trajectory data obtained from the VISSIM simulator is used for evaluating the accuracy of estimated travel times. Relevant technical issues for successful field implementation are also discussed.

• International Journal of Computer Science & Network Security
• /
• v.21 no.8
• /
• pp.55-64
• /
• 2021

In the last few years, the massive development in wireless networks, high internet speeds and improvement in car manufacturing has shifted research focus to Vehicular Ad-HOC Networks (VANETs). Consequently, many related frameworks are explored, and it is found that security is the primary issue for VANETs. Despite that, a small number of research studies have taken into consideration the identification of performance standards and parameters. In this paper, VANET security frameworks are explored, studied and analysed which resulted in the identification of a list of performance evaluation parameters. These parameters are defined and categorized based on the nature of parameter (security or general context). These parameters are identified to be used by future researchers to evaluate their proposed VANET security frameworks. The implementation paradigms of security frameworks are also identified, which revealed that almost all research studies used simulation for implementation and testing. The simulators used in the simulation processes are also analysed. The results of this study showed that most of the surveyed studies used NS-2 simulator with a percentage of 54.4%. The type of scenario (urban, highway, rural) is also evaluated and it is found that 50% studies used highway urban scenario in simulation.