• The Korean Journal of Ecology
• /
• v.13 no.3
• /
• pp.181-190
• /
• 1990

Chodo Archipelago ($125^{\circ}$45 $-126^{\circ}$13 E and $34^{\circ}$15 $-34^{\circ}$25 N, ca. $56.7km^2$), a part of the Dadohae National Marine Park, largely is covered with substitutional vegetation under various human impact such as grazing, cutting for firewood. However natural vegetation is partially distributed in the tutelary shrine forests, deep valleys and etc. From October 1988 to June 1989, phytosociological investigation of this forest vegetation was carried out by Braun-Blanquet s method. The forest vegetation was classified into 1 association and 7 communities. Ardisio-Castanopsietum sieboldii, Machilus thunbergii, Quercus acuta, Litsea japonca, Eurya japonica-Pinus thunbergii mixed forest, Pinus densiflora, Pinus rigida afforestation. Carpinus coreana community. Based on the classification, the actual vegetation map was drawn in 1 : 50,000 scale.

• Journal of Korean society of Dental Hygiene
• /
• v.7 no.2
• /
• pp.189-196
• /
• 2007

A study of the J health college dept of dental hygiene practice vistant a total of 35 supragingival calculus and subgingival calculus picking SEM observation and bacteria identification of the result are followings. 1. As observed by dental calculus SEM, the surface roughness appeared as peaks, valleys, and pits. 2. About bacteteria morphology blood agar plate small green zone partial hemolysis colony streptococcus observation 3. Isolated colony gram stain gram are positive display 4. Supragingival calculus at Lactococcus lactis spp. Leuconostoc spp. Streptococcus mitis, Aerococcus viridans bacteria 1, 3, 3, 16 species detection 5. Subgingival calculus at Aerococcus viridans, Leuconostoc spp. bacteria 5, 1 species detection.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.1374-1376
• /
• 2003

NASA, NSF and USGS jointly conducted a LIDAR survey over several sites in the Antarctic Dry Valleys and its vicinity, acquiring numerous surface points by NASA's Airborne Topographic Mapper (ATM) conical laser scanning altimetry system. The data set have high blunder ratio, and the conical scanning pattern resulted large variation of the point densities. Hence, to reduce the undesirable effects due to these characteristics and process the huge number of points with reasonable time and resources, we developed a novel approach to generate large-scale and high-resolution DEMs in robust, efficient and nearly automatic manners. Based on this approach we produced DEMs and then verified them with reference data.

• Proceedings of the KSRS Conference
• /
• 1999.11a
• /
• pp.290-295
• /
• 1999

Lineament extraction from mountain area often provides valuable geological information. In many cases, the lineaments correspond to a series of continuous large valleys. This paper introduces a new lineament extraction method from Digital Elevation Model (DEM) using Raindrop Tracing Algorithm (RTA). The main advantage of this algorithm over conventional Segment Tracing Algorithm (STA) is that it utilizes DEM directly unlike the STA Which utilizes the shaded relief of DEM. The RTA simulates the real life of raindrops that converge into a large valley. The simulation has been done by sprinkling the randomized raindrops over DEM and counting the number of raindrop path that follows the negative gradient of the DEM. The large counting number indicates the location of a big valley where the raindrops converge. With the help of the counting number array (accumulator array) recording the flowing path information, RTA can produce perfectly unbiased binary image of the lineament.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.6
• /
• pp.1207-1214
• /
• 2009

In this study, we propose a novel color-image segmentation algorithm to discern the teeth region utilizing RG intensity and its relevant RGB histogram features with resolving the variations of its maximum intensity in terms of peaks and valleys. Tooth candidates in a CCD image are first extracted by applying RGB color multi-threshold levels and consequently the successive morphological image operations and a Sobel-mask edge processing are performed to resolve the teeth region and its contour.

• Economic and Environmental Geology
• /
• v.32 no.3
• /
• pp.281-291
• /
• 1999

This study presents the gravity data with GPS survrying and the geophysical profiles at the Choogaryeong Rift Valley. And in determing geoid by GPS measurement, survey control points (SCP) whoch built by the Republic of Korean Army are used. Seventy nine SCP and the two triangulation stations are reviewd by GPS. Digital terain model is under for terrain analysis. The analyses of the gravity surveying with GPS are as follows. The low values of the negative Bouguer anomalies represent the high elevation terrain. The Bouguer anomalies show the decrrasing trend toward the eastern part of the study area. Characteristics of free-air anomalies are related with terrain elevation. The regional gravity anomalies decreas toward the eastern part of the study area. The trends of variations are associated with the thermotectonic and geologic structure beneath the Choogaryeong Rift Valley. The most parts of the study area represent negative residual gravity anomalies due to the low dencity of sedimentary cover in the Rift Valley. There are three valleys and four mountains in the direction of NE-SW or NNE-SSW which are structured by the geological features.

• Journal of the Korean Society of Safety
• /
• v.25 no.3
• /
• pp.112-117
• /
• 2010

This study presents a methodology to evaluate the driving safety of vehicles against localized high wind on the roads over the valleys or along the coasts. Risk level for vehicle accident is derived from the side slip caused by cross wind, and then safety criteria based on reliability for driving stability are defined. The level of safety is classified according to probability of exceeding against wind speed using the concept of extreme value statistics. To attain the safety level of vehicle on bridges, numerical simulations using Computational Fluid Dynamics(CFD) are performed. Based on this result, risk reduction and quality improvement is expected through analysis for each alternative in bridges design, construction and operation & maintenance stage with proposed process

• Structural Engineering and Mechanics
• /
• v.46 no.3
• /
• pp.387-402
• /
• 2013

A dynamic load protocol has been used to experimentally simulate fatigue behavior in cold-formed metal panels with screwed connections under wind loading. The specific protocol adopted is an adaptation of SIDGERS, originally developed for non-metallic membranes, which is composed of levels each under increasing load values. A total of 19 tests were performed on 3.35 m long by 0.91 m wide panels, identified as Type B-wide rib and Type E, both with screw connections at the edge and at the center, thus conforming two-span specimens. In some configurations the panels were fixed at the valleys, whereas crest-fixed connections were also investigated. Reinforcing the connections by means of washers was also investigated to evaluate their efficiency in improving fatigue capacity. The experimental results show maximum load capacities in improved connections with washers of approximately twice of those with classical connections.

• Bulletin of the Korean Mathematical Society
• /
• v.51 no.4
• /
• pp.1229-1240
• /
• 2014

In this paper we provide three results involving large Schr$\ddot{o}$der paths. First, we enumerate the number of large Schr$\ddot{o}$der paths by type. Second, we prove that these numbers are the coefficients of a certain symmetric function defined on the staircase skew shape when expanded in elementary symmetric functions. Finally we define a symmetric function on a Fuss path associated with its low valleys and prove that when expanded in elementary symmetric functions the indices are running over the types of all Schr$\ddot{o}$der paths. These results extend their counterparts of Kreweras and Armstrong-Eu on Dyck paths respectively.

• Proceedings of the KSRS Conference
• /
• 2004.10a
• /
• pp.107-109
• /
• 2004

High-resolution remotely sensed data such as SPOT-5 imagery are employed to study the effectiveness of the watershed segmentation algorithm. Existing problems in this approach are identified and appropriate solutions are proposed. As a case study, the panchromatic SPOT-5 image of part of Beijing urban areas has been segmented by using the MATLAB software. In segmentation, the structuring element has been firstly created, then the gaps between objects have been exaggerated and the objects of interest are converted. After that, the intensity valleys have been detected and the watershed segmentation have been conducted. Through this process, the objects in an image are divided into separate objects. Finally, the effectiveness of the watershed segmentation approach for high-resolution imagery has been summarized. The approach to solve the problems such as over-segmentation has been proposed.