• Journal of the Korean Institute of Landscape Architecture
• /
• v.25 no.3
• /
• pp.186-198
• /
• 1997

Although Jaesil are historical products which is related to our traditional culture, they have not been studied extensively. This study deals with the location and the spacial compositional characteristics of Jaesil, a traditional building special functions in culture. The summarized results are as follows : 1) Jaesil wee constructed in 15c~20c. Jaesil in Kyungpook province were built by the intelligent classes in 17c~18c, while Jaesil in Kyungnam province were built by the rich farmer classes with economic power in 19c~20c. 2) The functions of Jaesil were the following : It was used for the purpose of worship, school, temple. The main function in Kyungpook province was worship, while the main functions in Kyungnam province were worship and school. 3) The relationship between Jaesil and villages were as follows : Jaesil in Kyungpook were located in the mountains apart from villages and their main elements of landscape were valleys or rivers . While Jaesil in Kyungnam was located in the residental spaces and their main elements of landscape were an artificial pond or no water landscape. 4) The plane form of Jaesil, Which was constructed specially 'The ㅁtype' of Jaesil were common in Kyungpook province and tis type expresses the enclosure and centrifugal force. While 'The 一type and 二type' were common in Kyungnam, and this types expresses the poenness and practicality.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.3
• /
• pp.63-71
• /
• 1990

The hydrodynamic model parameters for the submicron GaAs simulation are calculated using the Monte Carlo method. $\Gamma$, L-, and X-valleys are included in the conduction band of GaAs, and polar optic phonon, acoustic phonon, equivalent intervalley, non-equivalent intervalley, ionized impurity, and piezoelectric scattering are taken into account. The velocity-electric field strength curve obtained in this paper is in good agreement with experimental one. We present the results in tabular form so that other participants can make use of them to simulate the submicron GaAs devices by the hydrodynamic model.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.38 no.1
• /
• pp.19-32
• /
• 2001

This paper proposes a local adaptive thresholding method based on a water flow model, in which an image surface is considered as a 3-dimensional (3-D) terrain. To extract characters from backgrounds, we pour water onto the terrain surface. Water flows down to the lower regions of the terrain and fills valleys. Then, the amount of filled water is thresholded, in which the proposed thresholding method is applied to gray level document images consisting of characters and backgrounds. The proposed method based on a water flow model shows the property of locally adaptive thresholding. Computer simulation with synthetic and real document images shows that the proposed method yields effective adaptive thresholding results for binarization of document images.

• Journal of the Korean Society for Precision Engineering
• /
• v.31 no.12
• /
• pp.1171-1176
• /
• 2014

Oil retention experiments were conducted and the performance was characterized for electrochemically etched stainless steels. The 304 stainless steels were electrochemically etched in dilute Aqua Regia to form porous structures. The structures were also hierarchical, which provides very large area for oils to adhere. Also the structures had deep valleys, which act as reservoir and are able to resist against oil-detaching forces. Several commercial oils were dispensed to characterize oil retention properties via rotating disk experiment method. The results showed that the etched surfaces have superior oil retention performance in every conditions. Also the retention enhancement ratio went particularly higher as the environments became more severe. This surface modification technique could be applied to other steel products for pretreatments of various kinds of coatings.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.23 no.3
• /
• pp.226-233
• /
• 2013

Individual differences in head-related transfer functions(HRTFs) were calculated using boundary element(BE) models for three Korean adults. The BE models for the individuals were developed from the computerized tomography(CT) images of the individuals. The BE models were composed of the head, pinna, and ear canal. The frequency-dependent impedance boundary conditions were imposed on the skin, hair, and tympanic membrane. The HRTFs calculated from the individual BE models showed large difference above 2 kHz in magnitude and in the locations of peaks and valleys of the frequency spectrums, which should be considered in virtual auditory sound field. The identified individual differences in the HRTFs demonstrate that the developed BE models can be utilized successfully in order to obtain the HRTFs information of individuals.

• Proceedings of the KSRS Conference
• /
• 2008.10a
• /
• pp.7-10
• /
• 2008

We present a technique for constructing a digital elevation model (DEM) from contours. The elevation of each ground point in DEM is computed by interpolating the heights of the two adjacent contours of the point. The technique decomposes each sub-domain between adjacent contours into a set of sub-regions. The decomposition is accomplished by constructing a medial axis of the sub-domain. Each sub-region in the decomposition is classified into a variety of terrain features like hillsides, valleys, ridges, etc. The elevations of points are interpolated with different methods according to terrain features they belong to. For a given point in hillside, an approximate gradient line passing through the point is determined and the elevation of the point is interpolated from the known elevations of the two adjacent contours along the approximate gradient line. The univariate monotone rational Hermite spline is used for the interpolation. The DEM constructed by the technique is to be used to orthorectify the high-resolution KOMPSAT3 imagery.

• Journal of Industrial Technology
• /
• v.19
• /
• pp.155-162
• /
• 1999

In the last few years the automatic classification of morpholgical landforms using GSIS and DEM was investigated. Particular emphasis has been put on the morphological point attribute approaches and the extraction of drainage basin variables from digital elevation models. The automated derivation of landforms has become a neccessity for quantitative analysis in geomorphology. Furthermore, the application of GSIS technologies has become an important tool for data management and numerical data analysis for purpose of geomorphological mapping. A process developed by Dikau et al, which automates Hanmond's manual process, was applied to the pyoung chang of the kangwon. Although it produced a classification that has good resemblance to the landforms in the area, it had some problems. For example, it produced a progressive zonation when landform changes from plains to mountains, it does not distinguish open valleys from a plains mountain interface, and it was affected by micro relief. Although automating existing quantitative manual processes is an important step in the evolution automation, definition may need to be calibrated since the attributes are oftem measured differently. A new process is presented that partly solves these problems.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.3
• /
• pp.526-534
• /
• 2006

In this paper we propose a new algorithm to detect the irises of both eyes from a human face. Using the separability filter, the algorithm first extracts blobs(intensity valleys) as the candidates for the irises. Next, for each pair of blobs. the algorithm computes a cost usings Hough transform and separability later to measure the fit of the pair of blobs to the image. And then, the algorithm selects a pair of blobs with the smallest cost as the irises of both eyes. As the result of the experiment using 150 faces images without spectacles, the success rate of the proposed algorithm was 97.3% for the best case and 95.3% for the worst case.

• Journal of Korean Society of Rural Planning
• /
• v.24 no.2
• /
• pp.101-107
• /
• 2018

This study has been conducted to understand the relationships such as interspecific interactions between species and landscapes within and outside of agricultural land by identifying the flora features of Cornus officinalis farmlands in Gurye which designated as Korea's Important Agricultural Heritage System. For this, the flora of vascular plants was surveyed in every land uses of two representative districts. These two districts represent the own features of Cornus officinalis farming area which including land uses like forests(especially pine tree), valley, farmland(rice paddy, farms, Cornus officinalis farmland), and residence. Also differences in flora by stone wall's existence and Cornus officinalis's DBH were surveyed. As a result, Cornus officinalis farmlands showed the various vascular plants than the other land uses. According to the existence of stone wall in Cornus officinalis farmlands, there were no differences in appearance flora. But the flora in Cornus officinalis farmlands which have different Cornus officinalis' DBH(Divided into average over 15cm and under 8cm), various plants were showed in average over 15cm than average under 8cm. In conclusion, Cornus officinalis farmlands have been actively engaged in various types of land use and species exchanges, including forests, valleys, villages, and fields, and it has been confirmed that it acts as an ecological axis connecting forests to villages.

• Elastomers and Composites
• /
• v.38 no.4
• /
• pp.354-362
• /
• 2003

The use of a petaloid design for the bottom of carbonated poly(ethylene terephthalate)(PET) bottles is widely spread. This study investigated the causes of bottom cracks. The tensile yield stress variations of PET according to the crystallinity and stretch ratio were examined, then the stretch ratio and strength in the bottom area of a blown bottle were analyzed. A crack test was also performed to observe the cracking phenomena. The distribution of the effective stress and maximum principal stress were both examined using computer simulation to seek the influence of the bottom design on crack. It was concluded that the bottom cracks occurred because of inadequate material strength due to the insufficient stretching of PET, plus the coarse design of a petaloid bottom. The stretch ratio at the bottom during bottle blowing should be higher than the strain hardening point of PET to produce enhanced mechanical strength. The cracks in the bottom of the PET bottles occurred through crazing below the yield stress. The maximum principal stress was higher in the valleys of the petaloid bottom than in the rest bottom area, and the maximum principal stress had a strong effect on the cracks.