• Elastomers and Composites
• /
• 제54권1호
• /
• pp.61-69
• /
• 2019

Poly(ethylene-co-vinyl acetate) (EVA) is a copolymer of ethylene and vinyl acetate (VA). It is important to determine the VA content of EVA, since the properties of EVA depend highly on the VA content. EVA copolymers have been used in a wide range of applications appropriate for the different VA contents. IR, NMR, and TGA are generally used for determination of the VA content of EVA copolymers. Of these, TGA is the most reliable method and can be applied to cured EVAs. Analytical methods for determination of the VA content and properties of EVA copolymers via TGA were herein reviewed. Thermal behaviors of EVA copolymers (glass transition temperature ($T_g$), melting point ($T_m$), and crystallization temperature ($T_c$)) determined by DSC were also reviewed. Analysis of the related literature revealed that the $T_g$, $T_m$, and $T_c$ decrease by about 0.46, 1.36, and $2.08^{\circ}C$, respectively, for every 1 wt% in VA content. A method for determining the degree of crosslinking of cured EVA copolymers was also reviewed, and the degree of crosslinking tends to increase with the decrease in the VA content.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2017년도 9th Asian Crop Science Association conference
• /
• pp.33-33
• /
• 2017

Water stress obstructs rice growth mainly by oxidative damage in biological cells to cause a reduction of leaf photosynthesis and evapotranspiration processes. In this study, exogenous application of vanillic acid (VA) and p-hydroxybenzoic acid (PHBA) to improve drought tolerance of two Oryza sativa cultivars, Q2 and Q8 was tested. The drought evaluation based on leaf phenotypes to show that both Q2 and Q8 resulted in remarkable water-stress tolerance induced by leaf spraying pretreatment of mixed solution of $50{\mu}M\;VA+50{\mu}M\;PHBA$. The mixtures of $25{\mu}M\;VA+25{\mu}M\;PHBA$ and $50{\mu}M\;VA+50{\mu}M\;PHBA$ treated on Q2 and Q8 in water deficit condition also indicated that total phenols, total flavonoids, and DPPH radical scavenging activity were significantly greater their controls. In general, the accumulation of individual phenolic acids was increased in exogenous phenolic treatments, as compared with controls. Particularly, Q2 obtained a considerable amount of endogenous PHBA after application of $50{\mu}M\;VA$, $25{\mu}M\;VA+25{\mu}M\;PHBA$, and $50{\mu}M\;VA+50{\mu}M\;PHBA$ (0.18 mg/g DW, 0.71 mg/g DW, and 1.41 mg/g DW, respectively); and a negligible content of VA (0.003 mg/g DW) appeared uniquely in the treatment of $50{\mu}M\;VA$. Similarly, Q8 also absorbed a significant quantity of PHBA in $50{\mu}M\;PHBA$, $25{\mu}M\;VA+25{\mu}M\;PHBA$, and $50{\mu}M\;VA+50{\mu}M\;PHBA$ treatments (0.15 mg/g DW, 0.15 mg/g DW, and 0.22 mg/g DW, respectively). In addition, the spraying $50{\mu}M\;PHBA$ and $25{\mu}M\;VA+25{\mu}M\;PHBA$ on Q8 leaves induced similar amount of VA (0.04 mg/g DW). Meanwhile, there were no trace of VA and PHBA found in controls. The levels of drought tolerance of Q2 and Q8 were improved, paralleled with the increased amounts of endogenous phenolics revealed that VA and PHBA played an important role to enhance drought tolerance in rice.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2005년도 춘계학술발표대회 논문집
• /
• pp.146-149
• /
• 2005

The using of composite material is an aviation field but it changes into a general industry. Especially composites are expanding the use on transportation vehicles like automobiles, ships, and aircrafts. The main factor of this expansion is high specific strength. It can supply a high quality and efficiency of energy. But manufacturing of composite products requires many raw materials and tooling cost for special process, so we needs a reduction of these costs to achieve best efficiency. In the present study, we contrast the change of mechanical and physical properties between VaRTM(Vacuum Assisted Resin Transfer Molding) and hand lay-up process. VaRTM process can offer a high quality the same as autoclave products, and low cost like hand lay-up process. In the results of mechanical tests, VaRTM specimen is stronger than hand lay-up specimen and hand lay-up specimen became delamination. In the results of physical tests, the resin content of VaRTM specimen is lower than hand lay-up specimen. On micrograph, the strength of specimen by VaRTM between fiber and resin is stronger than that of one by hand lay-up. And the specimen by hand lay-up contains more defects than one by VaRTM. So, VaRTM process can practically apply for automobile engine hood. This paper shows that VaRTM process is one of the most suitable processes for composite parts of automobile.

• Journal of the Korean Data and Information Science Society
• /
• 제24권6호
• /
• pp.1263-1274
• /
• 2013

VaR (value at risk)는 주어진 신뢰수준에서 일정기간 동안 발생할 수 있는 최대손실의 기대치를 나타내는 것으로, 현재 금융기관들의 대표적인 위험관리 수단으로 사용되고 있다. 기존의 대다수 연구에서는 수익률의 확률분포를 정규분포라 모형화한 후 VaR을 측정한다. 최근 Chen 등 (2012)은 수익률의 확률분포를 비대칭 라플라스 분포라 모형화하고 VaR을 측정하였기도 하였으나, 비대칭 라플라스 분포의 경우 그 모양을 결정하는 최빈값, 비대칭 정도, 분산정도 등을 실제적인 환경에서 제한된 개수의 데이터를 가지고 추정하기가 매우 어렵다는 단점이 있다. 이 논문에서, 우리는 (대칭) 라플라스 분포 모형이 정규분포 모형이나 비대칭 라플라스 분포 모형보다 실제적인 환경에서 VaR을 보다 더 정확히 추정해 줌을 주식시장의 실제 데이터와 VaR 초과비율, 기대초과손실, VaR초과편차율 등의 통계지표를 도입하여 입증한다.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2005년도 전기학술대회논문집
• /
• pp.377-381
• /
• 2005

The using of composite material is an aviation field but it changes into a general industry. Especially composites are expanding the use on transportation vehicles like automobiles, ships, and aircraft. The main factor of this expansion is high specific strength. It can supply a high quality and efficiency of energy. But manufacturing of composite products requires many raw materials and tooling cost for special process, so we needs a reduction of these costs to achieve best efficiency. In the present study, we contrast the change of mechanical and physical properties between VaRTM(Vacuum Assisted Resin Transfer Molding) and hand lay-up process. VaRTM process can offer a high quality the same as autoclave products, and low cost like hand lay-up process. In the results of mechanical tests, VaRTM specimen is stronger than hand lay-up specimen and hand lay-up specimen became delamination. In the results of physical tests, the resin content of VaRTM specimen is lower than hand lay-up specimen. On micrograph, the strength of specimen by VaRTM between fiber and resin is stronger than that of one by hand lay-up. And the specimen by hand lay-up contains more defects than one by VaRTM. So, VaRTM process can practically apply for automobile engine hood. This paper shows that VaRTM process is one of the most suitable processes for composite parts of automobile.

• 한국안광학회지
• /
• 제13권3호
• /
• pp.89-94
• /
• 2008

목적: 본 논문은 소아 및 학동기 그리고 청소년과 부모시력의 유전적 연관성을 보고자 하였다. 방법: 연구 대상자는 4~18세까지의 소아 및 학동기 그리고 청소년기에 속하는 어린이 208명과 피검자의 부모 340명이 참여하였다. 시력측정은 5 m용 한천석식 시력표를 이용하였으며, 각 단안씩 나안 및 교정시력을 측정하였다. 결과: 6세미만의 소아에서 아버지의 시력은 아무런 관련성을 찾을 수 없었으나, 남아에서는 어머니의 시력에 영향을 받는 것으로 나타났다. 학동기의 경우는 특히 부모와의 관련성이 높은 것으로 나타났는데 시력이 0.7이하인 그룹에서는 부모 모두 0.7이하가 많았으며, 0.7초과인 그룹에서는 부모도 같이 0.7을 초과하는 경향을 보였다. 청소년기의 경우에서도 어머니의 시력이 남아의 시력과 연관성이 있음을 보여주었다. 결론: 부모의 가족력이나 특히 어머니의 시력이상은 자녀의 시력이상에 더욱더 영향을 미치는 것으로 나타났다.

• 경영과학
• /
• 제30권3호
• /
• pp.55-70
• /
• 2013

In this study we suggested two optimization models to determine conversion weight of convertible bonds. The problem of this study is same as that of Park and Shim [1]. But this study used Value-at-Risk (VaR) for risk measurement instead of CVaR, Conditional-Value-at-Risk. In comparison with conventional Markowitz portfolio models, which use the variance of return, our models used VaR. In 1996, Basel Committee on Banking Supervision recommended VaR for portfolio risk measurement. But there are difficulties in solving optimization models including VaR. Benati and Rizzi [5] proved NP-hardness of general portfolio optimization problems including VaR. We adopted their approach. But we developed efficient algorithms with time complexity O(nlogn) or less for our models. We applied examples of our models to the convertible bond issued by a semiconductor company Hynix.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.369-372
• /
• 2001

We studied the electro-optical (EO) performance in the vertical-alignment (VA) - l/4$\pi$ cell photoaligned with polarized UV exposure on a homeotropic photopolymer surfaces. Excellent voltage-transmittance curve in the VA - l/4$\pi$ cell photoaligned with polarized UV exposure for 3 min on the photopolymer containing cholesterol group of 8% can be achieved. The V-T characteristics in the VA-l/4$\pi$ cell photoaligned on the photopolymer surface can be improved by increasing cholesteryl group. For response time measurement, the transmittance characteristics of the VA-l/4$\pi$ cell photoaligned on the photopolymer surface was better than that of the VA-l/4$\pi$ cell rubbingaligned on a polyimide(Pl) surface.

• 한국전기전자재료학회논문지
• /
• 제15권3호
• /
• pp.253-257
• /
• 2002

A new photoalignment material PNC, pole norbornene-2,3-dicarboxyolyl cholesterol, was synthesized and the electro-optical (EO) characteristics of the vortical-alignment (VA) liquid crystal display (LCD) photoaligned with UV exposure on the PNC surface were studied. EO characteristics of the photoaligned VA-LCD using a UV filter-less method was better than that of the UV filter method on the PNC surface for short UV exposure time. The response time of the photoaligned VA-LCD on the PNC surface without UV filter on the PNC surface is almost the same compared with the rubbing aligned VA-LCD.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집 Vol.3 No.2
• /
• pp.945-948
• /
• 2002

We studied electro-optical (EO) performances of a vertical-alignment (VA)-in plane switching (IPS) cell on a photopolymer surfaces. The VA-IPS cell, dark in voltage-off state, reveals bright uniformity in all directions due to the dual domainlike dierector configuration in the voltage-on state. For voltage-transmittance (V-T) measurement, the transmittance characteristics of the VA-IPS cell on the photopolymer surface was better than that of the VA-IPS cell on a polyimide(PI) surface.