• The Korean Journal of Food And Nutrition
• /
• v.11 no.3
• /
• pp.334-339
• /
• 1998

Flatfish strips were treated with 0.5%(v/v) acetic acid(AA), 0.5%(v/v) lactic acid(LA), or 0.5%(v/w) citric acid(CA) for 5 min. All strips were individually placed in Whirl-Pak sample bags and stored at 4 or 10$^{\circ}C$. pH, TBA, color, and sensory quality of strips were evaluated after 0, 3, 6, 9, and 12 days of storage time. The pH of samples treated with AA for 5 min ranged from 5.39 to 6.64 for 12 days at 4$^{\circ}C$, which had a significantly (P<0.05) lower level compared to the controls during storage time. Acid treatments had a significantly (P<0.05) higher levels of TBA values compared to the controls for 12 days at 4$^{\circ}C$. All acid treatments had lower Hunter a and b color scores compared to the controls. Acid treatments were liked less by sensory panels than the fresh control due to acidic odor and flesh discoloration.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2013.05a
• /
• pp.194-194
• /
• 2013

In order to investigate nanotube morphology change of Ti-6Al-4V alloys by heat treatments, the Ti-6Al-4V alloys were used in this study. In non-treated Ti-6Al-4V alloy case, nanotubes only exhibited at ${\alpha}$ phase region with dissolved V-oxide area of ${\beta}$ phase. However, in Ti-6Al-4V alloy at $800^{\circ}C$ WQ case, nanotubes exhibited at both ${\alpha}$ and ${\beta}$ phase region. Electrochemical corrosion studies showed that the nanotubular alloy at $800^{\circ}C$WQ possesses slightly higher corrosion resistance than non-treated nanotubular alloy.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.300-301
• /
• 2007

$Mg_4(Nb_{2-x}V_x)O_9$ (MNV) ceramics have been prepared by a hydrothermal method. Low-temperature sintering of $Mg_4(Nb_{2-x}V_x)O_9$ (MNV) by V substitution for Nb was discussed in this study. A $Q{\cdot}f_0$ value of 103,297 GHz with a ${\varepsilon}_r$ of 12.56 and a ${\tau}_f$ of $-10.53\;ppm/^{\circ}C$ was obtained when x=0.0625 after sintering at $1100^{\circ}C$ for 5 h.

• Journal of Life Science
• /
• v.10 no.4
• /
• pp.380-387
• /
• 2000

Recently Vibrio sp. are the most frequently isolated microorganism, which causing food poisoning. We investigated the detection of toxin genes and effect of chitosan to toxin genes with PCR. Thirty strains of Vibrio sp. were isolated from sea water and sea products through biological and biochemical tests. Out of 30 strains, 8 were identified as V. parahemolyticus, 7 as V. mimcus, 6 as V. damsela, 5 as V. vulnificus, 4 as V. alginoyticus. In detection of ctx, tdh, and t고 as food poisoning-causing toxin genes, ctx from 7 strains, trh from 4 strains and tdh from 6 strains were detected. Among toxin genes detected strains, we selected V. vulnificus-2 V. damsela-1 and V. parahemolyticus-7. As adding chitosan solution to PCR product of 3 strains, the amplified DNA bands were not detected over 450$\mu\textrm{g}$/$m\ell$ concentrantion of chitosan. Over the result, chitosan is thought to influence the detection of toxin gene.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.4
• /
• pp.809-813
• /
• 2010

Although the goals of HL7 Version 2(V2) and Version 3(V3) are identical, the concepts of the implementation and technological basis are different; this makes their versions inconvertible. This problem interrupts technological innovation advanced from V2 to V3 and has been raised as a new type of barrier in the field of medical information system. This study intends to develop software to convert V2 to V3 which can be utilized in the actual medical environment. Since it is practically difficult to develop the whole tools that automatically change total V2 messages into V3 messages, this article has designed, implemented, and tested the software that allows mapping between V2 and V3 which function as tools. In order to test this program, it has used ADT^A03 of five V2 messages to generate V3 messages. It is expected that the result of this research will be one of the new methods allowing conversion between V2 and V3.

• Korean Journal of Crystallography
• /
• v.15 no.1
• /
• pp.35-39
• /
• 2004

Two new nickel vanadium borophosphate cluster compounds, $(NH_4)_{10}[Ni(H_2O)_5]_4[V_2P_2BO_{12}]_6{\cdot}nH_2O$ (1) and $(NH_4)_{3.5}(C_3H_{12}N_2)_{3.5}[Ni(H_2O)_6]_{1.25}{[Ni(H_2O)_5]_2[V_2P_2BO_{12}]_6{\cdot}nH_2O$ (2) have been synthesized and structurally characterized. Inter-diffusion methods were employed to prepare the compounds. The cluster anion $[(NH_4)\;{\supset}\;V_2P_2BO_{12}]_6$ is used as a building unit in the synthesis of new compounds containing $Ni(H_2O){^{2+}_5}$ in the presence of pyrazine and 1,3-diaminopropane. Compounds contain isolated cluster anions with general composition ${[Ni(H_2O)_5]_n[(NH_4)\;{\supset}\;V_2P_2BO_{12}]_6}^{-(17-2n)}$ (n = 2, 4). Crystal data: $(NH_4)_{10}[Ni(H_2O)_5]_4[V_2P_2BO_{12}]_6{\cdot}nH_2O$, monoclinic, space group C2/m (no. 12), a = 27.538(2) ${\AA}$, b = 20.366(2) ${\AA}$, c = 11.9614(9) ${\AA}$, ${\beta}$ = 112.131(1)$^{\circ}$, Z = 8; $(NH_4)_{3.5}(C_3H_{12}N_2)_b[Ni(H_2O)_6]_{3.5}{[Ni(H_2O)_5]_2[V_2P_2BO_{12}]_6{\cdot}nH_2O$, triclinic, space group P-1 (no. 2), a = 17.7668(9) ${\AA}$, b = 17.881(1) ${\AA}$, c = 20.668(1) ${\AA}$, ${\alpha}$ = 86.729(1)$^{\circ}$, ${\beta}$ \ 65.77(1)$^{\circ}$, ${\gamma}$ = 80.388(1)$^{\circ}$, Z = 2.

• Journal of Broadcast Engineering
• /
• v.14 no.1
• /
• pp.70-80
• /
• 2009

We propose an ideal line coding for high speed data communication in visible light communication system. B4-HBT line coding is defined as follow. The 1 bit is +V at first though 1 encodes +Voltage and -Voltage doing change of shift each other, then -V newly. V that is been mutually contradictory for 1 bit that exist before that if continuous 0 bits exist 4 here same and reduces mistake because has reverse mark V in 4 continuous last 0 bits and gives half bit variation in 1 bit and made effect of noise low. 2${\sim}$3 dB profit is seen comparing with line coding that exist in simulation result.

• Korean Journal of Materials Research
• /
• v.10 no.9
• /
• pp.636-641
• /
• 2000

The effects of Fe and V content on the characteristics of $\beta$ to $\alpha$ phase transformation for Zr-0.8Sn alloys were studied by optical and transmission electron microscopy. With increasing V content, $\beta{\rightarrow}\alpha+\beta$ transformation temperature decreased, thus allowing the width of $\alpha$-lath to be fine air-cooled Zr-0.8Sn-xV alloys. The width of $\alpha$-lath, however, was slightly increased with Fe content. While the $\beta$ to $\alpha$ transformed microstructures of water-quenched Zr-0.8Sn, Zr-0.8Sn-0.1Fe, Zr-0.8Sn-0.2Fe, Zr-0.8Sn-0.4Fe, Zr-0.8Sn-0.1V and Zr-0.8Sn-0.2V were mainly slipped martensite, that of water-quenched Zr-0.8Sn-0.4V was predominantly twinned martensite. The transition of slipped martensite to twinned martensite in Zr-0.8Sn-Xv was thought to be due to the decrease of $M_S$ temperature.

• Journal of Life Science
• /
• v.29 no.10
• /
• pp.1126-1135
• /
• 2019

From a sample of bamboo byproduct, the protease-producing yeast strain CO-1 was newly isolated. Strain CO-1 is spherical to ovoid in shape and measures $3.1-4.0{\times}3.8-4.4{\mu}m$. For the growth of strain CO-1, the optimal temperature and initial pH were $30^{\circ}C$ and 4.0, respectively. The strain was able to grow in 0.0-15.0%(w/v) NaCl and 0.0-9.0%(v/v) ethanol. Based on a phylogenetic analysis of its 18S rDNA sequences, strain CO-1 was identified as Pichia anomala. The extracellular protease produced by P. anomala CO-1 was partially purified by ammonium sulfate precipitation, which resulted in a 14.6-fold purification and a yield of 7.2%. The molecular mass of the protease was recorded as approximately 30 kDa via zymogram. The protease activity reached its maximum when 1.0%(w/v) CMC was used as the carbon source, 1.0%(w/v) yeast extract was used as the nitrogen source, and 0.3%(w/v) $MnSO_4$ was used as the mineral source. The protease revealed the highest activity at pH 7.0 and $30^{\circ}C$. This enzyme maintained more than 75% of its stability at a pH range of 4.0-10.0. After heating at $65^{\circ}C$ for 1 hr, the neutral protease registered at 60% of its original activity. The protease production coincided with growth and attained a maximal level during the post-exponential phase.

• Progress in Medical Physics
• /
• v.9 no.2
• /
• pp.65-71
• /
• 1998

The aims are to evaluate the effects of an 1.0 cm acrylic plate and SSD on the dose profile and depth dose distribution of 9 MeV electron beam and to analyse adequacy for using an acrylic plate to reduce energy of electron beams. An acrylic plate of 1.0 cm thickness was used to reduce energy of 9 MeV electron beam to 7 MeV. The plate was put on an electron applicator at 65.4 cm distance from x-ray target. The size of the applicator was 10${\times}$l0cm at 100 cm SSD. For 100cm, l05cm and 110cm SSD, depth dose on beam axis and dose profiles at d$\_$max/ on two principal axes were measured using a 3D water phantom. From depth dose distributions, d$\_$max/, d$\_$85/, d$\_$50/ and R$\_$p/, surface dose, and mean energy and peak energy at surface were compared. From dose profiles flatness, penumbra width and actual field size were compared. For comparison, 9 MeV electron beams were measured. Surface dose of 7 MeV electron beams was changed from 85.5% to 82.2% increasing SSD from 100 cm to 110 cm, and except for dose buildup region, depth dose distributions were independent of SSD. Flatness of 7 MeV ranged from 4.7% to 10.4% increasing SSD, comparing 1.4% to 3.5% for 9 MeV. Penumbra width of 7 MeV ranged from 1.52 cm to 3.03 cm, comparing 1.14 cm to 1.63 cm for 9 MeV. Actual field size increased from 10.75 cm to 12.85 cm with SSD, comparing 10.32 cm to 11.46 cm for 9 MeV. Virtual SSD's of 7 and 9 MeV were respectively 49.8 cm and 88.5cm. In using energy reducer in electron therapy, depth dose distribution were independent of SSD except for buildup region as well as open field. In case of using energy reducer, increasing SSD made flatness to deteriorate more severely, penumbra width more wide, field size to increase more rapidly and virtual SSD more short comparing with original electron beam. In conclusion, it is desirable to use no energy reducer for electron beam, especially for long SSD.