• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.87-87
• /
• 1999

본 연구에서는 Pulsed Laser Deposition(이하 PDL)방법을 이용하여 Si기판에 (Ba,Sr)TiO3(이하 BST)박막을 MFS-FET(Metal-Ferroelectric-Semiconductor Field-effect Transistor)구조로 제조하였으며 BST박막의 강유전성이 BST 박막에 유도되는 응력에 어떤 영향을 받는지 살펴보았다. 본 연구에서는 완충막을 사용함으로써 BST박막과 완충막간의 격자부정합을 이용하여 BST박막에 강유전성을 유도하려고 하였다. 또한 MFS-FET구조의 BST박막에 유도되는 응력조절을 위하여 BST박막과 완충막의 두께를 변화하였으며 XRD를 통한 구조 분석 및 C-V test를 통한 전기적 특성을 관찰을 하였다. PLD법을 통해서 epitaxial 성장된 BST 박막에서는 Si에 epitaxial 성장된 완충막과의 격자부정합에 의한 BST박막내의 자발분극의 발생이 예상된다. 따라서, 본 연구는 강유전체의 자발분극에 의하여 발생되는 C-V 이력현상이 BST박막과 완충막과의 격자부정합에 의한 응력에 의해 발생될 것으로 예상하여, BST 박막에 유도되는 응력과 C-V 이력현상의 관계를 통하여 상온에서 상유전성을 갖는 BST가 응력에 의하여 어느 정도의 강유전성을 나타내는지를 밝히기 위해 진행되었다. 본 연구에서 사용된 완충막은 YSZ(Yttria Stabilized Zirconia)박막으로 0.4mTorrO2 분위기 하에서 600~80$0^{\circ}C$의 온도에서 증착하여 상형성을 살펴보았고 $700^{\circ}C$에서 epitaxial 성장을 확인하였으며 두께는 30~$\AA$으로 변화하였다. 또한 BST박막은 완충막과의 전압분배를 고려해 300~2000$\AA$으로 두께를 변화를 시키며 증착하였다. MFS 구조에서 Al 전극을 사용하여 완충막과 BST박막간의 두께 변화에 따른 Capacitance - Voltage(C-V) 측정을 하였으며 이를 통하여 강유전상의 특성인 C-V 이력현상을 관찰하였다. 그 결과 YSZ 박막에서는 C-V 이력현상이 나타나지 않았으며 BST 박막에서는 약 1.2V의 C-V이력현상이 보였다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.10
• /
• pp.899-905
• /
• 2016

Wireless access in vehicle environment (WAVE) communication is currently being researched as core wireless communication technologies for cooperative intelligent transport systems (C-ITS). WAVE consists of both vehicle to vehicle (V2V) communication, which refers to communication between vehicles, and vehicle to infrastructure (V2I) communication, which refers to the communication between vehicles and road-side stations. V2I has a longer communication range than V2V, and its communication range and reception rate are heavily influenced by various factors such as structures on the road, the density of vehicles, and topography. Therefore, domestic environments in which there are many non-lines of sight (NLOS), such as mountains and urban areas, require optimized communication channel modeling based on research of V2I propagation characteristics. In the present study, the received signal strength indicator (RSSI) was measured on both an experience road and a test road, and the large-scale characteristics of the WAVE communication were analyzed using the data collected to assess the propagation environment of the WAVE-based V2I that is actually implemented on highways. Based on the results of this analysis, this paper proposes a WAVE communication channel model for domestic public roads by deriving the parameters of a dual-slope logarithmic distance implementing a two-ray ground-reflection model.

• KSBB Journal
• /
• v.10 no.4
• /
• pp.374-385
• /
• 1995

Nutritional requirements and cultural conditions for the production of extracellular gelatin-degrading proteolytic enzyme by Bacillus subtilis B0021 were investigated. Optimum carbon source for proteolytic enzyme production was salicin, but it was substituted by glucose for economical reason. The fermentation medium giving a maximum proteolytic enzyme activity was consisted of 1.5%(w/v) glucose, 2.5%(w/v) yeast extract, and 0.001%(w/v) manganese sulfate and 0.002%(w/v) ferrous sulfate. Proteolytic enzyme activity of B. subtilis B0021 was completely inhibited by 0.5%(w/v) tannic acid. Initial pH was optimal at 7.0 and the enzyme activity in the flask culture usually reached a maximal level after 36 hours of fermentation at $30^{\circ}C$. In the $5\ell$ fermentor fermentation at $30^{\circ}C$, enzyme activity was maximum at 36 hour of cultivation but after this enzyme activity was decreased rapidly. Initial viscosity of 45%(w/v) gelatin(2,800mPas) was decreased rapidly to 96%(mPas) after hydrolysis for 4hr at $40^{\circ}C$ by crude enzyme of B. subtilis B0021.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.6 no.1
• /
• pp.44-55
• /
• 1996

Emerald (3BeO{\cdot}Al$_{2}$O_{3}{\cdot}6SiO_2 : Cr^{3+}$) single crystals were grown by flux method of $Li_2O-MoO_3 - V_2O_5$ system. The composition of starting materials were 1, 3, 5 mole ratio of $MoO_3 - V_2O_5/$Li_2O$, 20 - 15% of emerald content to flux composition and 1% of $Cr_2O_3$ colordopant to emerald composition. After mixing those were melted at $1100^{\circ}C$ in Pt crucible of electric furnace. Single crystal growth was cooled down slowly rate of $3^{\circ}C$/hr from $1100^{\circ}C$ to $650^{\circ}C$, for the cooling period it was controlled and prevented the nucleation of microcrystallite from variation of each thermal fluctuation range. Specially it has been obtained plenty of large emerald single crystal when thermal fluctuation was treated for cooling period at $1050 ~ 950^{\circ}C$, in 3 mole ratio of $V_2O_5 - MoO_3/Li_2O$ flux. Emerald single crystal growing effect and $Cr_{+3}$ ion of substitutional solid solution effect for $Al_{+3}$ ion was good than mole ratio of 5. Emerald single crystals were c (0001) hexagonal rystal face of preferencial direction and m (1010) post side. Emerald was hexagonal columnar greenish transparent and 2.65 ~ 2.66 of specific gravity.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2003.05a
• /
• pp.53-53
• /
• 2003

Plasma polymerized organic thin films were deposited on Si(100) glass and metal substrates using thiophene and ethylcyclohexane precursors by PECVD method. In order to compare electrochemical properties of the as-grown thin films, the effects of the RF plasma power in the range of 30~100 W. AFM showed that the polymer films with smooth surface and sharp interface could be grown under various deposition conditions. Impedance analyzer was utilized for the determination of I-V curve for leakage current density and C-V for dielectric constants, respectively. To obtain C-V curve, we used a MIM structure of metal(Al)-insulator(plasma polymerized thin film)-metal(Pt) structure. Al as the electrode was evaporated on the thiophene films that grew on Pt coated silicon substrates, and the dielectric constants of the as-grown films were then calculated from C- V data measured at 1MHz. From the electrical property measurements such as I-V and C-V characteristics, the minimum dielectric constant and the best leakage current of thiophene thin films were obtained to be about 3.22 and $1{\;}{\times}10^{-11}{\;}A/cm^2$. However, in case of ethylcyclohexane thin films, the minimum dielectric constant and the best leakage current were obtained to be about 3.11 and $5{\;}{\times}10^{-12}{\;}A/cm^2$.

• Applied Biological Chemistry
• /
• v.34 no.3
• /
• pp.273-278
• /
• 1991

Methanol assimilating bacterium, Pseudomonas sp. ILS-003 was used to investigate the optimum conditions for the production of $poly-{\beta}-hydroxybutyric$ acid from methanol. For PHB production, the optimum initial pH was 6.4 and the optimum temperature was $30^{\circ}C$. Also the optimum methanol concentration was found to be 1.0%(v/v). In the PHB production, $(NH_4)_2SO_4$ was the most effective nitrogen source and the optimum concentration was 0.8 g/l, which was eqivalent to 17.4 in C/N ratio. Also, deficiency of the 2 valence metal ions in the medium had stimulating effect on PHB accumulation. Under the optimum substrate concentration, successive feeding of 0.25%(v/v) methanol was the most effective on PHB production. Under the optimum conditions, 1.94 g/l of PHB and 2.78 g/l of dry biomass were produced in 96 hours, and the yield was 69.8%(w/w).

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.300-301
• /
• 2007

$Mg_4(Nb_{2-x}V_x)O_9$ (MNV) ceramics have been prepared by a hydrothermal method. Low-temperature sintering of $Mg_4(Nb_{2-x}V_x)O_9$ (MNV) by V substitution for Nb was discussed in this study. A $Q{\cdot}f_0$ value of 103,297 GHz with a ${\varepsilon}_r$ of 12.56 and a ${\tau}_f$ of $-10.53\;ppm/^{\circ}C$ was obtained when x=0.0625 after sintering at $1100^{\circ}C$ for 5 h.

• KSBB Journal
• /
• v.14 no.1
• /
• pp.103-108
• /
• 1999

A bacterium having strong fibrinolytic activity, S7-16 strain, was isolated from soil. The isolated bacterium was identified and named as Bacillus sp. S7-16. The optimal composition of the medium for the production of fibrinolytic enzyme by Bacillus sp. S7-16 was 0.5%(w/v) polypeptone, 0.5%(w/v) yeast extract, 0.3%(w/v) NaCl, 0.1% (w/v) $KH_2PO_4,\;0.3%(w/v)\;K_2PHO_4,\;and\;0.01%(w/v)\;MgSO_4{\cdot}7H_2O$. The optimal temperature and initial pH of the medium for the production of the enzyme were $35^{\circ}C$ and 7.0, respectively. The maximum production of the fibrinolytic enzyme was obtained after 24 hours of the incubation. Under the above conditions, the culture supernatant had strong fibrinolytic activity. Within pH4~11, the crude fibrinolytic enzyme was stable. The enzyme was stable up to $50^{\circ}C$. The optimum pH and temperature for the enzyme activity were around 7.5 and $40^{\circ}C$, respectively.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.83-83
• /
• 2008

Metal-oxide-silicon-on-insulator (MOSOI) structures were fabricated to study the effect caused by reactive ion etching (RIE) and sacrificial oxidation process on silicon-on-insulator (SOI) layer. The MOSOI capacitors with an etch-damaged SOI layer were characterized by capacitance-voltage (C-V) measurements and compared to the sacrificial oxidation treated samples and the reference samples without etching treatment. The measured C-V curves were compared to the numerical results from 2-dimensional (2-D) simulations. The measurements revealed that the profile of C-V curves significantly changes depending on the SOI surface condition of the MOSOI capacitors. The shift in the measured C-V curves, due to the difference of the fixed oxide charge ($Q_f$), together with the numerical simulation analysis and atomic force microscopy (AFM) analysis, allowed extracting the fixed oxide charges ($Q_f$) in the structures as well as 2-D carrier distribution profiles.

• Journal of the Korean Society of Tobacco Science
• /
• v.25 no.1
• /
• pp.20-26
• /
• 2003

To investigate the effects of reduction of leaf processing factories on the uniformity of processed leaf quality, the contents and their C.V.(Coefficient of Variation) of chemical constituents of flue-cured leaf tobacco produced from 1997 to 2001 and processed at various factories were analysed. The average leaf chemical contents of 12 grades for 5 years ranged as follows ; nicotine 2.00∼0.85%. total sugar 10.7∼16.9%, total nitrogen 2.36∼2.78%, crude ash 14.6∼15.6% and chlorine 0.50∼0.75%. The variations of chemical contents among crop years was higher in total sugar content while lower in crude ash content. The C.V. of chemical content in same grade leaves was higher in chlorine content while lower in total nitrogen and crude ash contents, and the ratio of C.V. among processing factories/C.V. in total population was higher in total sugar content while lower in crude ash content. When the leaves were processed at one factory, the deviations of chemical contents reduced considerably. Particularly, the decreasing effect of deviation was higher in total sugar content.