• Tuberculosis and Respiratory Diseases
• /
• v.62 no.6
• /
• pp.492-498
• /
• 2007

Background: Several lines of evidence suggest that a host's genetic factors influence the outcome of exposure to Mycobacterium tuberculosis. The aim of this study was to determine whether polymorphism in NRAMP1 (natural resistance associated macrophage protein 1) gene is associated with the susceptibility or resistance to tuberculosis infection for patients with drug-sensitive pulmonary tuberculosis (DS-TB) and multi-drug resistant pulmonary tuberculosis (MDR-TB). Methods: Eight genetic polymorphisms of the NRAMP1 gene were investigated in patients suffering with DS-TB (n=100) or MDR-TB (n=102), and in healthy normal controls (NC, n=96). The genetic polymorphisms of NRAMP1 were determined by polymerase chain reaction-restriction fragment length polymorphism (PCR-RFLP). Results: The frequency of D543N A/G heterogygotes was significantly higher in the DS-TB subjects than the NCs (OR=2.10, 95% CI: 1.00 to 4.41, p=0.049). The frequency of 823C/T T/C heterozygotes was significantly higher in the DS-TB subjects (OR=2.79, 95% CI: 1.11 to 7.04, p=0.029) and the MDR-TB subject (OR=3.30, 95% CI 1.33 to 8.18, p=0.010) than in the NCs. However, the frequency of these genotypes was not different between the DS-TB and MDR-TB subjects. Conclusion: A significant association was found between NRAMP1 823 C/T polymorphism and pulmonary tuberculosis. This result suggests that NRAMP1 polymorphism may be involved in the development of pulmonary tuberculosis in Koreans.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.17 no.2
• /
• pp.101-108
• /
• 1984

In order to study the optimal conditions of processing and storage for boiled and dried anchovy (Engraulis japonica) with high protein digestibility, the contents of trypsin indigestible substrate (TI) and in vitro apparent protein digestibility were determined. Peroxide value (PoV), TBA number and nonenzymatic brown pigments, that accounted for important antinutritional factors, were also measured and confirmed the relationship between those factors and formation of TI or in vitro protein apparent digestibility. The results were as follows; Samples boiled for 5 minutes showed the lower content of TI than the other samples boiled for 0.5 min. or 1 min. Hot air dried products had a lower TI content in comparison with the other dried ones such as sun dried or freeze dried products. It was revealed that the lower temperature ($8{\pm}1^{\circ}C$) did not affect to a great degree of forming TI and falling in vitro digestibility comparing to high temperature ($26{\pm}1^{\circ}C$) during storage. The lowest TI content (0.173 mg/g solid) was noted in the samples for 5 minutes and then sun drying after 56 days storage at $9{\pm}1^{\circ}C$. A rapid decrease of in vitro protein digestibility occurred within 0.5 min. of boiling and showed the value $85.3\%$. Freeze dried samples possessed the highest in vitro protein digestibility ($85.9\%$), when compared to sun dried or hot air dried products. Fat oxidation and nonenzymatic browning were proceeded with the various boiling times, drying methods and storing temperatures. It was noted that boiling for 5 minutes and freeze drying accelerate the fat oxidation significantly. More nonenzymatic brown pigments was developed in samples boiled for shorter time (0.5 min.) and that stored at high temperature ($26{\pm}1^{\circ}C$) than the other products. Therefore, fat oxidation and nonenzymatic browning assumed to be a major inhibitory reaction in enzyme digestion and those might be an important role in forming TI in boiled and dried anchovy products during processing and storage.

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.6
• /
• pp.812-820
• /
• 2002

An experiment was conducted on 190 progeny (winter -74; summer -59; rainy -57) of 12 Grey Giant rabbits (10 female +2 males), to assess the effect of different seasons in a year, on their reproductive, growth and productive performances along with feed efficiency, under sub-temperate Himalayan conditions. The daily meteorological attributes recorded during winter (October to March), summer (April to June) and rainy (July to September) seasons, and analysed were minimum and maximum temperature, relative humidity and rainfall. Various biological parameters recorded were doe weights at mating and kindling, litter size at birth, litter weight at birth, kit mortality, litter size at weaning, litter weight at weaning, weekly body weight up to 98 d and weaner mortality. Individual weight gains, dressing percentages, meat weights, liver weights, raw-pelt weights, processed pelt weights and processed pelt areas at slaughter on d 84 and 98, respectively were also recorded. The feed and fodder compositions and their nutritive values during different seasons were also analysed. Average ambient temperature during winter, summer and rainy seasons were $13.2{\pm}2.8$, $22.4{\pm}3.7$ and $24.8{\pm}2.3^{\circ}C$, respectively. The average relative humidity and total rainfall for winter, summer and rainy seasons were $68.9{\pm}1.5$% and $48{\pm}26.6$mm, $66.3{\pm}4.8$% and $125.6{\pm}56.8$ mm, and $77.3{\pm}1.3$% and $116.3{\pm}90.4$ mm, respectively. The weight of doe at mating and kindling, litter size at birth, litter weight at birth and litter size at weaning were comparatively higher whereas litter weight at weaning was significantly (p<0.05) higher during winter as compared to summer and rainy seasons. The kit mortality was significantly (p<0.05) higher during winter while the weaner mortality was significantly (p<0.05) higher during rainy season. At 84 d, the live weight per doe, slaughter weight, dressing percentage and liver weight were significantly (p<0.05) higher during winter than summer and rainy. Similarly, the gain in weight and meat weight at 84 and 98 d were significantly (p<0.05) higher during winter. The weight of raw pelt and processed pelt were recorded significantly (p<0.05) higher during winter while no difference in the area of processed pelts during different seasons could be observed. No difference in the biological performance could be observed between sexes in any of the seasons. Roughage analysis revealed comparatively higher crude protein percent and lower crude fibre percent during summer and rainy seasons than in winter. The roughage dry matter intake was comparatively higher during summer and rainy seasons vis-a-vis constant amount of concentrate supplied during all the three seasons. The digestibilities of dry matter was significantly (p<0.05) lower, whereas that of crude fiber, acid detergent fibre and cellulose were negative during winter. Interestingly, the feed:gain was exceedingly well during winter than in other seasons and it is concluded that it was the best season for production of rabbits under sub-temperate Himalayan conditions.

• The korean journal of orthodontics
• /
• v.33 no.4 s.99
• /
• pp.235-245
• /
• 2003

The goal of the present study was to evaluate the effects of PNAM appliance and cheiloplasty on alveolar molding. Samples consisted of 16 unilateral cleft lip and palate infants (10 males and 6 female, mean age=37.0 days after birth, average alveolar cleft gap=10.46m), who were treated with PNAM appliances by one orthodontist and rotation- advancement cheiloplasty by one surgeon in Seoul National University Hospital. Average duration of alveolar molding treatment was 13.10 weeks and these patients were recalled at average 8.31 weeks after cheiloplasty. These patients' models were obtained at initial visit (T0, mean age : $37.0\pm27.89$ days after birth), after successful alveolar molding (T1, mean age : $119.25\pm40.18$ days after birth), and after cheilopasty (T2, mean age : $190.81\pm42.78$ days after birth). Seven linear and five angular variables were measured using 1 : 1 photometry and soft ware program(V-ceph. Cybermed. Seoul, Korea). Paired t-test was performed to investigate statistical significance at p<0.05 level. 1 The posterior parts of alveolar segments were the stable structures during alveolar molding treatment period and after cheiloplasty in infants. 2. The closure of cleft gap during alveolar molding was usually due to backward bending of the whole part of the greater segment. 3. Although forward growth of the greater segment was hindered by alveolar molding, it resumed after cheiloplasty. 4. Increase of anterior inter-segment angle after cheiloplasty was due to the molding effect of the lip scar pressure.

• Restorative Dentistry and Endodontics
• /
• v.35 no.3
• /
• pp.164-172
• /
• 2010

During a composite resin restoration, an anticipating contraction gap is usually tried to seal with low-viscosity resin after successive polishing, etching, rinsing and drying steps, which as a whole is called rebonding procedure. However, the gap might already have been filled with water or debris before applying the sealing resin. We hypothesized that microleakage would decrease if the rebonding agent was applied before the polishing step, i.e., immediately after curing composite resin. On the buccal and lingual surfaces of 35 extracted human molar teeth, class V cavities were prepared with the occlusal margin in enamel and the gingival margin in dentin. They were restored with a hybrid composite resin Z250 (3M ESPE, USA) using an adhesive AdperTM Single Bond 2 (3M ESPE). As rebonding agents, BisCover LV (Bisco, USA), ScotchBond Multi-Purpose adhesive (3M ESPE) and an experimental adhesive were applied on the restoration margins before polishing step or after successive polishing and etching steps. The infiltration depth of 2% methylene blue into the margin was measured using an optical stereomicroscope. The correlation between viscosity of rebonding agents and mciroleakage was also evaluated. There were no statistically significant differences in the microleakage within the rebonding procedures, within the rebonding agents, and within the margins. However, when the restorations were not rebonded, the microleakage at gingival margin was significantly higher than those groups rebonded with 3 agents (p < 0.05). The difference was not observed at the occlusal margin. No significant correlation was found between viscosity of rebonding agents and microleakage, except very weak correlation in case of rebonding after polishing and etching at gingival margin.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.38 no.2
• /
• pp.357-367
• /
• 2018

Recent earthquakes in Gyeongju and Pohang have raised interest in liquefaction in South Korea. Liquefaction, which is a phenomenon that excessive pore pressure is generated and the shear strength of soil is decreased by repeated loads such as earthquakes, causes severe problems such as ground subsidence and overturning of structures. Therefore, it is necessary to identify and prepare for the possibility of liquefaction in advance. In general, the possibility of liquefaction is quantitatively assessed using the Liquefaction Potential Index (LPI), but it takes a lot of time and effort for performing site response analysis which is essential for the liquefaction evaluation. In this study, a simple method to evaluate the liquefaction potential without executing the site response analysis in a downtown area with a lot of borehole data was proposed. In this simple method, the correlation between the average shear wave velocity of the target location ground and the LPI divided by thickness of liquefiable layer was established. And the applicable correlation equation for various rock outcrop accelerations were derived. Using the 104 boreholes information in Seoul, the correlation equation between LPI and the shear wave velocity (ground water level: 0m, 1m, 2m, 3m) is obtained and the possibility of liquefaction occurrence in Seoul and Gyeongju is evaluated. The applicability of the proposed simple method was verified by comparing the LPI values calculated from the correlation equation and the LPI values derived using the existing site response analysis. Finally, the distribution map of LPI calculated from the correlation was drawn using Kriging, a geostatistical technique.

• Applied Microscopy
• /
• v.24 no.2
• /
• pp.78-92
• /
• 1994

Lysozyme has been reported to be present in the secretory granules of the Paneth cell, and lysozyme immunoreactivity has been detected by immunogold method in Paneth cells of the intestine of human, mouse and rat. The present study was aimed at clarifying the intracellular distribution and changes of the lysozyme immunoreactivity in rabbit Paneth cell after common bile duct ligation of rabbit, using the electron microscope immunogold technique. Healthy adult rabbits weighing about 2kg body weight were divided into normal and bile duct ligated groups. Common bile duct ligation was performed aseptically under ether anesthesia. Experimental animals were sacrificed on the 1st, the 3rd, the 5th, the 7th and the 14th day after the operation. Mucosal specimens from the intestinal gland of ileum were fixed in 2.5% glutaraldehyde-1.5% paraformaldehyde, followed by 1% osmium tetroxide, embedded in araldite mixture, cut with LKB-V ultratome. Ultrathin sections were placed on parlodion coated nickel grids (200mesh). The section-bearing grids were floated upside down on the added substance in a moist chamber at room temperature except for the primary antibody step, which was at $4^{\circ}C$. Sections were etched with a saturated solution of sodium m-periodate for 60min. After etching, sections were pretreated with 0.02M tris buffered saline (TBS), pH 8.4, with 1% bovine serum albumin (BSA, Sigma) for 60min, then treated polyclonal rabbit anti-human lysozyme (Dakipatts) diluted 1 : 50 in TBS with 0.1% BSA for 20hr. Subsequently, grids were incubated 60min in biotinylated goat anti rabbit IgG (Amersham) diluted 1 : 100 in TBS with 0.1% BSA. After this, sections were incubated 60min on streptavidin gold G10 (Amersham) diluted 1 : 50 in TBS with 0.1% BSA. After each step, the grids were briefly rinsed with TBS with 0.1% BSA. After the strepavidin gold step, the sections were jet washed with distilled water. Counterstain of the sections performed by uranyl acetate and lead citrate, and observed with JEM 100 CX II electron microscope. Observed results were as follow; 1. Secretory granules of mouse Paneth cells have a lysozyme immunoreactivity and also eosinophil leucocyte of rabbit applied for the positive-control stain, are well labeld with gold particles. 2. Normal rabbit Paneth cells have a lysozyme immunoreactivity restricted on the secretory granules. 3. Amount lysosomes containing myelin figures in the Paneth cells were significantly increased from 5th day after the common bile duct ligation. 4. Immunoreactivity of Paneth cell secretory granules were more activated on the 3rd day after the common bile duct ligation as compared with those of the normal animal. But the lysozyme immunoreactivity were decreased from the 5th day after the common bile duct ligation. 5. Considering the above finding, lysozyme contained Paneth cell are affected following of common bile duct ligation, whereas lysosomes containing myelin-figure do not exhibit any immunoreactive relationship with those of secretory granules.

• Radiation Oncology Journal
• /
• v.19 no.1
• /
• pp.34-39
• /
• 2001

Purpose : It is not common to evaluate the response of the fractionated stereotactic radiotherapy (SRT) to primary hepatoma as compared with conventional radiotherapy. The purpose of the study was to take the preliminary result on the clinical trial of primary hepatoma by SRT. Materials and Methods : From July 1999 to March 2000, thirty three patients were hospitalized in the St. Mary's Hospital, and treated with SRT for extracranial tumors. Among them, 13 patients were diagnosed to primary hepatoma and then applied by frameless SRT using 6 MV linac accelerator. There were 12 male and 1 female patients. They had the age of $ 44\~66$ year old (median : 59) and the tumor size of $10\~825\;cc$ (median : 185 cc). SRT was given to them $3\~5$ fractions a week (5 Gy/fraction, $90\%$ isodose line) for $2\~3$ weeks. Median dose of SRT was 50 Gy and the range was $30\~50\;Gy$. Results : Follow-up period ranged from 3 months to 13 months with median of 8 months. After treating SRT to thirteen patients with primary hepatoma, the response of the tumor was examined by abdominal CT : they are classified by 1 complete regression $(7.7\%)$, 7 partial regression $(53.8\%)$, 4 minimal regression $(30.8\%)$, 1 stable disease $(7.7\%)$. The positive responses more than partial remission were 8 patients $(61.5\%)$ after the treatment. The level of serum alpha-fetoprotein (AFP) after the treatment as compared with pretreatment had been $92.3\%$ decreased. There was no severe complication except dyspepsia $84.6\%$, mild nausea $69.2\%$, transient decreased of hepatic function $15.4\%$ and fever $7.7\%$. Conclusion : SRT to the patients with primary hepatoma was potentially suggested to become the safe and more effective tool than the conventional radiotherapy even though there were relatively short duration of follow-up and small numbers to be tested.

• Radiation Oncology Journal
• /
• v.14 no.1
• /
• pp.77-85
• /
• 1996

Purpose : Multileaf collimator(MLC) is very suitable tool for conformal radio-therapy and commissioning measurements for a multileaf collimator installed on a dual energy accelerator with 6 and 10MV photons are required, For modeling the collimator with treament planning software, detailed dosimetric characterization of the multileaf collimator including the penumbra width, leaf transmission between leaf leakage and localization of the leaf ends and sides is an essential requirement. materials and Methods : Measurement of characteristic data of the MLC with 26 pair block leaves installed on CLINAC 2100C linear accelerator was performed. Low sensitive radiographic film(X-omatV) was used for the penumbra measurement and separate experiments using radiographic film and thermoluminescent dosimeters were performed to verify the dose distribution, Measured films were analized with a photodensitometer of WP700i scanner. Results : For 6 & 10 MV x-ray energies, approximately $2.0\%$ of photons incident on the multileaf collimator were transmitted and an additional $0.5\%$ leakage occurs between the leaves. Localizing the physical end of the leaves showed less than 1mm deviation from the $50\%$ decrement line and this difference is attributed to the curved shaped end on the leaves One side of a sin히e leaf corresponded to the $50\%$ decrement line, but the opposite face was aligned with a lower value. This difference is due to the tongue and groove used to decrease between leaf leakage. Alignment of the leaves to form a straight edge resulted larger penumbra at far position from isocenter as compare with divergent alloy blocks. When the MLC edge is stepped by sloping field, the isodose lines follow the leaf pattern and Produce scalloping isodose curves in tissue. The effective penumbra by 45 degree stepped MLC is about 10mm at 10cm depth for 6MV x-ray. The difference of effective penumbra in deep tissue between MLC and divergent alloy blocks is small (5mm). Conclusion : Using the characteristic data of MLC, the MLC has the clinlical acceptability and suitability for 3-D conformal radiotherapy except small field size.

• Journal of the Korean Wood Science and Technology
• /
• v.27 no.1
• /
• pp.88-104
• /
• 1999

This study was carried out to classify the Hanjis into three groups that were indigenous Hanji, traditional Hanji, and improved Hanji handmade by paper making method according to the physical properties of each paper sheet such as tensile, bursting and tearing strength, folding endurance and fiber orientation in each layer. The results obtained were summarized as follows: 1. The multi-layered Hanjis made by "Oebal" Hanji making method in different direction of fiber orientation have good properties in tearing resistance. 2. The multi-layered Hanji in different direction of fiber orientation has good properties in the tearing resistance, but the burst index and the breaking length results were lower than the single layered Hanjis. 3. The different fiber orientation and multi-layered method didn't increase, the three indexes(burst index, tear index, breaking length). Only, the different direction of fiber orientation decreased the difference of width and length strength (tensile, tear) of the Hanji. 4. "Dochim"(Korean finishing touch process for indigenous Hanji by fulling round sticks) greatly increase folding endurance(double folds, not $log_{10}$) and good effect to tensile strength and burst strength. 5. The today's Oebal Hanji were the maximum of 2 layers and the indigenous Oebal Hanji were 16 layers the maximum. In addition, average of the indigenous Oebal Hanji was 4 layers(all 4-layer Hanji were the different fiber orientation of each layer). 6, The indigenous Hanji(multi-layered, and different fiber orientation) was good condition with "Dochim". Dochim increased tensile strength and burst strength of the indigenous Hanji. So the three-strength indexes were similar level("--"). 7. When the number of layer which were same fiber orientation increase, the increased Hanji became similar strength pattern("V", breaking length and burst index was higher than tear index) with "Ssangbal" Hanji. 8. The single layered papers that made by "Oebal" Hanji making method were similar strength pattern with Ssangbal Hanji. 9. There was no way to find the width and length direction of multi-layered Hanji by comparison between the difference of tensile strength and the difference of tearing resistance. 10. The compared pattern of tensile strength and tearing resistance of indigenous Oebal Hanji was different from today's Oebal Hanji. Especially, the tearing resistance of all indigenous Oebal Hanji(16 samples) was stronger on width of tearing resistance. And in the half of indigenous Oebal Hanji samples, the width of tensile strength and tearing resistance was stronger than length strength (Indigenous Oebal: '$\ulcorner\lrcorner$' 50%, '$\bigcup$' 50% $\leftrightarrow$ Today's Oebal: '$\ulcorner\lrcorner$' 12%, '$\bigcup$'6%, '$\llcorner\urcorner$'17%, '$\bigcap$'65%). In 65% today's Oebal, the length direction of tensile strength and tearing resistance was stronger than the width direction.