• Applied Microscopy
• /
• 제8권1호
• /
• pp.1-8
• /
• 1978

The aim of this research was to discover the action mechanism of various antituberculosis agents (isoniazid, paraaminosalicylic acid and streptomycin) which act on Mycobacteria tuberculosis hominis $H_{37}R_v$ and also to study the relationship of ultrastructural changes and the growth pattern in Mycobacterium tuberculosis hominis. The ultrastructural change was observed with an electron microscope while the growth pattern was studied through in vitro culture. The results are summarized as follows: 1. The ultrastructural changes found in the group treated only with isoniazid were the loss of nuclear materials and the appearence of electron dense granules. 2. In the group treated with paraaminosalicylic acid, thickening of nuclear filaments and meso some arrangement disorders were observed. 3. In the group treated with streptomycin, the ribosome particles appeared indistinct and the cytoplasm was denaturalized. 4. In the group cross treated with all three agents, all the ultrastructural changes mentioned above could be observed in the cell just as they appeared in the single treated groups. 5. In all of the single and in the crossly treated group, there were no significant changes note in the cell wall or cytoplasmic membranes of any of the cells observed. 6. In the cultural data in vitro, through the crossly treated group and single treated group. growth was observed in 3-5 weeks of culture.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 C
• /
• pp.1946-1949
• /
• 1996

We have performed silicon-to-silicon anodic bonding using glass layer deposited by electron beam evaporation. Wafers can be bonded at $135^{\circ}C$ with an applied voltage of $35V_{DC}$, which enables application of this technique to the vacuum packaging of microelectronic devices, because its bonding temperature and voltage are low. From the experimental results, we have found that the evaporated glass layer more than $1\;{\mu}$ m thick was suitable for anodic bonding. The role of sodium ions for anodic bonding was also investigated by theoretical bonding mechanism and experimental inspection.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.490-495
• /
• 2003

In steel-making process of iron and steel industry, the purity and quality of steel can be dependent on the amount of CO contained in the molten metal. Recently, the supersonic oxygen jet is being applied to the molten metal in the electric furnace and thus reduces the CO amount through the chemical reactions between the oxygen jet and molten metal, leading to a better quality of steel. In this application, the supersonic oxygen jet is limited in the distance over which the supersonic velocity is maintained. In order to get longer supersonic jet propagation into the molten metal, a supersonic coherent jet is suggested as one of the alternatives which are applicable to the electric furnace system. It has a flame around the conventional supersonic jet and thus the entrainment effect of the surrounding gas into the supersonic jet is reduced, leading to a longer propagation of the supersonic jet. In this regard, gasdynamics mechanism about why the combustion phenomenon surrounding the supersonic jet causes the jet core length to be longer is not yet clarified. The present study investigates the major characteristics of the supersonic coherent jet, compared with the conventional supersonic jet. A computational study is carried out to solve the compressible, axisymmetric Navier-Stokes equations. The computational results of the supersonic coherent jet are compared with the conventional supersonic jets.

• Advances in environmental research
• /
• 제2권4호
• /
• pp.261-277
• /
• 2013

The degradation of alachlor has been investigated using sonolysis (US), photocatalysis (UV) and sonophotocatalysis (US/UV) using three photocatalyst viz. $TiO_2$ (mixture of anatase and rutile), $TiO_2$ (anatase) and ZnO. The effect of photocatalyst loading on the extent of degradation of alachlor has been investigated by varying $TiO_2$ (both types) loading over the range of 0.01 g/L to 0.1 g/L and ZnO loading over the range of 0.05 g/L to 0.3 g/L. The optimum loading of the catalyst was found to be dependent on the type of operation i.e., photocatalysis alone or the combined operation of sonolysis and photocatalysis. All the combined processes gave complete degradation of alachlor with maximum rate of degradation being obtained in the case of sonophotocatalytic process also showing synergistic effect at optimized loading of photocatalyst. About 50% to 60% reduction in TOC has been obtained using the combined process of sonophotocatalysis depending on the operating conditions. The alachlor degradation fitted first order kinetics for all the processes under investigation. It has been observed that the $TiO_2$ (mixtrure of anatase and rutile) is the most active photocatalyst among the three photocatalysts studied in the current work. The effect of addition of radical enhancers and scavengers on sonophotocatalytic degradation of alachlor has been investigated in order to decipher the controlling mechanism. The alachlor degradation products have been identified using LC-MS method.

• 한국군사과학기술학회지
• /
• 제8권2호
• /
• pp.58-66
• /
• 2005

This paper presents miniaturized setback generators based on the conversion of mechanical energy into electrical energy for military applications, especially power supply for electronic fuzes. In order to minimize the volume of setback generators, a ring-shaped magnet enclosing a coil assembly is adopted. A mechanical safety system, shear plate, is used as a release mechanism of the setback generators to prevent the generators from operating accidentally. The setback generators are intended not to ignite an electrical detonator but to charge a capacitor which is capable of driving electronic circuit of fuze. We design the setback generators using the simulation results of an electromagnetic analysis tool, $Maxwell^{(R)}$ 2D. In experimental study, we perform safety tests of the shear plate and firing tests of the fabricated setback generators. The present setback generators show that the voltage of 14.2V is charged at the capacitor of $30{\mu}F$ within the charging time of 0.68msec and the critical acceleration for safety is 5,000G, thus verifying that the setback generators with a ring-shaped permanent magnet can be applicable to the power supply of small-caliber electronic fuze.

• 마이크로전자및패키징학회지
• /
• 제12권1호
• /
• pp.53-58
• /
• 2005

구리 배선에서의 신뢰성 평가를 위해 직류전류와 교류전류를 각각 인가하였을 때의 파손 발생을 분석해 보았다. 직류 전류에서는 electromigration 현상이 발생하는데, 높은 전류 밀도와 온도에서 더욱 빠르게 파손이 진행되었으며, 실험을 통해 구한 활성화 에너지와 전류밀도 의존지수는 각각 0.96eV와 4의 값을 갖는 것으로 나타났다. 교류 전류에서는 열 피로 현상이 발생하였는데, 높은 주파수와 ${\Delta}$T가 클수록 파손이 심하게 진행되었다. 집합 조직에 따른 failure morphology분석 결과, (100)grains에서는 결함이 넓게 성장하여 facetted grains가 되지만 (111)에서는 배선의 두께 방향으로 성장하여 빠르게 단선을 유발하는 것으로 나타났다.

• Advances in Traditional Medicine
• /
• 제7권3호
• /
• pp.261-273
• /
• 2007

We investigated the antihypertensive effect of Pet ether extract (PE) of ginger rhizome; its toluene fraction (TF) and Korean ginseng extract (KGE) in deoxycorticosterone acetate (DOCA) - salt induced and fructose induced hypertensive rats. In DOCA model, DOCA (25 mg/kg, once a week; s.c) was administered in uninephrectomised animals for 4 w. PE (50 mg/kg/day; p.o), TF (10 mg/kg/day; p.o) and KGE (30 mg/kg/day; p.o) were evaluated for their antihypertensive effect. In the fructose model, drinking water was replaced with fructose (10%) for five weeks to induce hypertension. PE (50 mg/kg/day; p.o) and KGE (30 mg/kg/day; p.o) were assessed for its antihypertensive effect in fructose model. After completion of the treatment schedule, vascular reactivity to various agonists like 5-HT, noradrenaline, adrenaline, phenylbiguanide and acetylcholine were recorded in rats of both the models. A cumulative dose response curve (CDRC) of 5-HT was carried out in isolated rat fundus strip of the fructose induced hypertensive rats. Chronic administration of PE (50 mg/kg/day; p.o), TF (10 mg/kg/day; p.o), and KGE (30 mg/kg/day; p.o) significantly reduced the blood pressure in DOCA salt whereas PE (50 mg/kg/day; p.o) and KGE (30 mg/kg/day; p.o) reduced the blood pressure in fructose induced hypertensive rats. Treatment with PE (50 mg/kg/day; p.o) and KGE (30 mg/kg/day; p.o) in fructose model for five weeks shifted the CDRC towards the right on rat fundus. The mechanism of action may partly involve the serotonergic antagonistic property.

• 한국표면공학회지
• /
• 제46권4호
• /
• pp.139-144
• /
• 2013

c-BN(cubic boron nitride) is known to have extremely high hardness next to diamond, as well as very high thermal and chemical stability. The c-BN in the form of film is useful for wear resistant coatings where the application of diamond film is restricted. However, there is less practical application because of difficult control of processing variables for synthesis of c-BN film as well as unclear mechanism on formation of c-BN. Therefore, in the present study, the structural characterization of c-BN thin film were investigated using $B_4C$ target in r.f. magnetron sputtering system as a function of processing variables. c-BN films were coated on Si(100) substrate using $B_4C$ (99.5% purity). The mixture of nitrogen and argon was used for carrier gas. The deposition processing conditions were changed with substrate bias voltage, substrate temperature and base pressure. Fourier transform infrared microscopy (FT-IR) and X-ray photoelectron spectroscopy (XPS) were used to analyze crystal structures and chemical binding energy of the films. In the case of the BN film deposited at room temperature, c-BN was formed in the substrate bias voltage range of -400 V~ -600 V. Less c-BN fraction was observed as deposition temperature increased and more c-BN fraction was observed as base pressure increased.

• 한국자동차공학회논문집
• /
• 제17권1호
• /
• pp.137-145
• /
• 2009

The steady-state kinetics of the selective catalytic reduction (SCR) of $NO_X$ with $NH_3$ has been investigated over a commercial ${V_2}{O_5}/TiO_2$ catalyst. In order to account for the influence of transport effects the kinetics are coupled with a fully transient two-phase 1D+1D monolith channel model. The Langmuir-Hinshelwood (L-H) mechanism is adopted to describe the steady-state kinetic behavior of the ${V_2}{O_5}/TiO_2$ catalyst. The reaction rate expressions are based on previously reported papers and are modified to fit the experimental data. The steady-state chemical reaction scheme used in the present mathematical model has been validated extensively with experimental data of selective $NO_X$ reduction efficiency for a wide range of inlet conditions such as space velocity, oxygen concentrations, water concentration, and $NO_2/NO$ ratio. The parametric investigations are performed to examine how the $NH_3$ slip from a SCR $DeNO_X$ catalyst and the conversion of $NO_X$ are affected by the reaction temperature, $NH_3/NO_X$ feed ratio, and space velocity for feed gas compositions with $NO_2/NO_X$ ratios of 0 and 0.5.

• International Journal of Fluid Machinery and Systems
• /
• 제3권1호
• /
• pp.11-19
• /
• 2010

The performance of the crossover system of a centrifugal compressor stage consisting of static components of $180^{\circ}$ U-bend, return channel vanes and exit ducting with a $90^{\circ}$ bend is investigated. This study is confined to the assessment of performance of the crossover system by varying the shape of the return channel vanes. For this purpose two different types of Return Channel Vanes (RCV1 and RCV2) were experimentally investigated. The performance of the crossover system is discussed in terms of total pressure loss coefficient, static pressure recovery coefficient and vane surface pressure distribution. The experimentation was carried out on a test setup in which static swirl vanes were used to simulate the flow at the exit of an actual centrifugal compressor impeller with a design flow coefficient of 0.053. The swirl vanes are connected to a mechanism with which the flow angle at the inlet of U-bend could be altered. The measurements were taken at five different operating conditions varying from 70% to 120% of design flow rate. On an overall assessment RCV1 is found to give better performance in comparison to RCV2 for different U-bend inlet flow angles. The performance of RCV2 was verified using numerical studies with the help of a CFD Code. Three dimensional sector models were used for simulating the flow through the crossover system. The turbulence was predicted with standard k-$\varepsilon$, 2-equation model. The iso-Mach contour plots on different planes and development of secondary flows were visualized through this study.