• 마이크로전자및패키징학회지
• /
• 제11권1호
• /
• pp.59-64
• /
• 2004

고분자 전해질 연료전지의 성능은 촉매 지지 물질의 특성에 의존한다. 본 연구에서는 백금 촉매의 지지체로서 CNF(carbon nanofibre)와 CNT(carbon nanotube)를 사용하였다. CNF와 CNT는 기상화학증착법과 메카노케미컬 공정에 의해 처리된 촉매를 이용하여 합성되었다. 백금은 고분자 전해질 연료전지의 적용을 위하여 CNF와 CNT로 지지되었다. 그 결과, 65 nm의 직경을 가지는 twisted CNF로 준비된 MEA가 가장 우수한 I-V 특성을 나타내는 것이 확인되었다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(2)
• /
• pp.273-276
• /
• 2001

The origin of image-slicking in metal-insulator-metal type thin-film-diode(TFD) LCDs is the asymmetric current-voltage(I-V) characteristic of TFD element. we developed that MIM-LCDs have reduced-image-sticking and perfect symmetry characteristic. One-Time Post-Annealing (OPTA) heat treatment process was introduced to reduce the asymmetry and shift of the I-V characteristics, respectively. OPTA means that the whole layers of lower metal, insulator, and uuper metal are annealed at one time. The treatment temperatures and fabricated process of TFD element were under foot. Also, this low temperature fabricated process allows the application of plastic substrates.

• 대한수학회보
• /
• 제33권1호
• /
• pp.75-86
• /
• 1996

Let G be a finite simple connected graph with vertex set V(G) and edge set E(G). Let A(G) be the adjacency matrix of G. The characteristic polynomial of G is the characteristic polynomial $\Phi(G;\lambda) = det(\lambda I - A(G))$ of A(G). A zero of $\Phi(G;\lambda)$ is called an eigenvalue of G.

• 한국산학기술학회논문지
• /
• 제21권3호
• /
• pp.569-575
• /
• 2020

최근, 화석연료 고갈과 온실 가스 배출에 대한 우려가 높아지면서 신·재생 에너지 기술에 대한 연구가 주목을 받고 있다. 휴대용 전자기기 및 웨어러블 디바이스의 수요가 증가하고 IT기기들이 소형화되면서 배터리의 크기, 사용시간 등의 한계를 극복하기 위한 기술로 에너지 하베스팅이 있다. 본 논문에서는 열전소자의 V-I 특성곡선과 내부저항을 분석하고, 기존의 MPPT제어방식을 비교하였다. P&O제어방식은 열전소자의 전압, 전류를 측정하기 위한 센서 2개를 사용해야하기 때문에 경제적으로 비효율적이다. 따라서 본 논문에서는 출력전압 조절을 위한 센서1개만을 이용하여 MPP를 추적하는 새로운 MPPT제어방식을 제안한다. 제안하는 MPPT제어방식은 duty ratio와 부하의 출력전압의 관계를 이용하였으며, DC-DC Converter의 출력전압을 주기적으로 샘플링하여 duty ratio를 증가 또는 감소시켜 최적의 duty ratio를 찾아 MPP를 유지하도록 제어된다. DC-DC Converter는 Two-Switch 토폴로지인 Cascaded boost-Buck Converter를 이용하여 회로도를 설계하였다. 제안된 MPPT 제어방식은 PSIM 시뮬레이션을 이용한 모의실험을 통하여 검증하였고, 그 결과 열전소자의 V-I 특성곡선으로부터 얻어지는 MPP에서 전압×전류 및 전력값(V=4.2V, I=2.5A, P=10.5W)과 일치함을 확인하였다.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제4B권2호
• /
• pp.86-91
• /
• 2004

PV power generation, which directly converts solar radiation into electricity, contains numerous significant advantages. It is inexhaustible and pollution-free, silent, contains no rotating parts, and has size-independent electricity conversion efficiency. The positive environmental effect of photovoltaics is that it replaces the more polluting methods of electricity generation or that it provides electricity where none was available before. This paper highlights a novel simple method to abstract the entire parameters of the solar cell. In development, design and operation of PV power generation systems, a technique for constructing V-I curves under different levels of solar irradiance and cell temperature conditions using basic characteristic values of the PV module is required. Everyone who has performed manual acquisition and analysis of solar cell I versus V data would agree that the job is tedious and time-consuming. A better alternative is to use an automated curve tracer to print out the I versus V curves and compute the four major parameters; $V_{oc}$, $I_{sc}$, FF, and . Generally, the V-I curve tracer indicates only the commonly used solar cell parameters. However, with the conventional V-I curve tracer it is almost impossible to abstract the more detailed parameters of the solar cell; A, $R_{s}$ and $R_{sh}$ , which satisfies the user, who aims at the analysis of the development of the PV power generation system, that being advanced simulation. In this paper, the proposed method provides us with satisfactory results to enable us to abstract the detailed parameters of the solar cell; A, $R_s$ and $R_{sh}$.>.

• Progress in Superconductivity
• /
• 제8권1호
• /
• pp.113-118
• /
• 2006

The design of superconducting magnets for a 600 kJ SEMS was discussed. The basic constraint conditions in the design of a 600 kJ SMES magnet were V-I loss(<1 W), inductance of magnet(<24 H), the number of Double Pancake Coils(DPC about 10), the number of turns of DPC(<300), outer diameter of DPC(close to 800 mm) and total length of HTS wire in a DPC(<500 m). As a result of optimum design, we obtained design parameters of the 600 kJ SMES magnet with two operating currents, 360 A and 370 A, which are in the limited conditions without V-I loss. V-I loss of each operating current was calculated with design parameters and V-I characteristic of the HTS wire. As a result of calculations, V-I losses with operating currents of 360 A and 370 A were 0.6 W and 1.86 W, respectively. Even though all design parameters of the SMES magnet in case of operating current of 360 A were in the restricted conditions, V-I loss of SMES magnet showed a tendency to generate at local DPCs, which are located on the top and the bottom of the SMES magnet more than that of the other DPCs.

• 한국초지조사료학회지
• /
• 제12권4호
• /
• pp.253-259
• /
• 1992

The esterase isozyme in tissue of wild legume plants were separated by horizontal starch gel electrophoresis. Extracts used in this study were prepared from fully expanded young leaf, cotyledon and radicle of seedling and root-nodule of Glycine sola, Vigna vexillata var. tsuscmensis and Trifoliwn repens. The results are as follows; 1. Each tissue examined had a characteristic banding pattcrn. Number of bands in each species, G. soja, V. vexillata, and T . repens, were 14, 8 and 1 1 bands, respectively. And difference in esterase isozyme bands were greater from tissue to tissue than difference between habitat. 2. Est-I, Est-2. Est-3 and Est-4 in G. soja, Est-I in V. vexillata and Est-l and Est-2 in T. repens showed strong cnzyme activity than other enzyme. 3. Esterase isozyme variation in G. soja and T . repens showed more variety than V. vexillata. This is resulted from many genotypic differences within species. 4. The main enLyme among thc esterase isozyme were Est-I. Est-2, Est-3 and Est-4.

• 대한수학회지
• /
• 제45권4호
• /
• pp.965-976
• /
• 2008

In this article, we constructively prove that on a surface S with genus g$\geq$2, there exit maximal geodesic laminations with 7g-7,...,9g-9 leaves. Thus, S can have ideal cell-decompositions (i.e., S can be (ideally) triangulated by maximal geodesic laminations) with 7g-7,...,9g-9 (ideal) 1-cells. Once there is a triangulation for a compact surface, the Euler characteristic for the surface can be calculated as the alternating sum F-E+V, where F, E, and V denote the number of faces, edges, and vertices, respectively. We also prove that the same formula holds for the ideal cell decompositions.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.485-488
• /
• 2001

This paper provides the result of analysis of the structure and I-V characteristics of D.C. 1500 V surge arresters which were installed in railway line currently. As Porcelain housed surge arresters have unstable elements such as exploding and dispersion, so it is thought that the system is protected more stably with replacement of polymer housing. The adoption of gap mitigates the voltage stress which is degradation factor of surge arresters and the research is needed to enhance the life characteristic in additive and manufacturing process. Therefore, it is thought that the research should be continued to develop homemade the surge arresters for D.C. railway line as well as transmission line.

• 전자공학회논문지C
• /
• 제35C권11호
• /
• pp.57-62
• /
• 1998

본 논문에서는 넓은 입력 전압 범위에 걸쳐 좋은 선형성을 보여주는 가변 트랜스컨덕터를 제안한다. 제안된 트랜스컨덕터는 선형 영역에서 동작하는 입력 MOS 트랜지스터를 사용하여 회로의 구성이 간단하고 좋은 가변성을 갖고 6.8V/sub p-p/의 넓은 입력범위를 갖는다. 또한 소오스-결합 차동쌍을 이용하여 실질적인 차동입력을 제공하고 정과 부의 트랜스컨덕턴스 값을 제공한다. 제안된 회로는 1.2㎛ single poly double metal n-well CMOS 공정을 사용하여 제작되었다. 제안된 회로의 THD 특성은 V/sub DD/=-V/sub ss/=5V, I/sub B/=20, 40μA이고 입력 신호 주파수가 1KHz일 때 6V/sub p-p/의 차동 입력전압에 대해 1% 미만임을 보여준다.