• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.427-428
• /
• 2014

서론: 최근 전세계적인 고령화 진행에 따른 뇌졸중, 파킨슨병, 알츠하이머병 등과 같은 각종 뇌관련 질환에 대한 관심이 더욱 높아지고 있으며 다양한 뇌질환 치료를 위하여 뇌 신경 신호의 정확한 검출 대한 연구가 학계에서 활발히 진행되고 있다. 효과적인 뇌 신경 신호 검출을 위해서는 세포조직의 손상을 최소화 할 수 있는 초소형 신경탐침 및 극소 면적내에서 극대화된 검출 전극이 구현되어야 한다. 그러나, 극소 면적내에 구성된 소면적 전극을 통한 신호 검출은 전극 계면에서의 높은 임피던스를 야기시켜 정밀한 신경신호 검출에 어려움을 만든다. 따라서, 뇌 신경 신호 검출시 전극 계면에서의 낮은 임피던스를 검출하기 위한 다결정실리콘, 이리듐 산화막, 탄소나노튜브와 같은 다양한 전극 소재를 이용한 신경탐침 연구가 제안되어 왔다. 본 연구에서는 극소화된 전극면적과 신경세포 계면에서의 저 임피던스 신경신호 검출을 위하여 비이온성 계면활성제와 전해도금을 이용하여 높은 거칠기값을 갖는 나노동공 백금층을 검출 전극으로 활용하였다. 실험 결과: 제작된 신경탐침의 몸체는 실리콘으로 이루어지며, 탐침 끝단에는 신호 측정을 위한 나노동공 백금층을 갖는 전극들이 집적되어 있다. Fig. 1 는 제작된 나노동공 백금을 갖는 신경탐침의 이미지 (a), SEM (b), TEM (c), FESEM (d) 측정결과를 보여준다. 0.9 %의 NaCl 용액에서 제작된 신경탐침의 계면임피던스 및 위상각 변화에 대한 측정결과가 Fig. 2에 나타나 있다. 1.2 kHz 주파수에서 $942.6K{\Omega}$ ($0.029{\Omega}cm^2$, $3.14{\mu}m^2$)로 극대화된 실표면적을 갖는 나노동공 백금층에 의하여 매우 낮은 임피던스 특성을 보인 것으로 판단된다. 또한 제작된 신경탐침은 위상각이 $-82.9^{\circ}$로서 캐패시터와 같은 역할을 하고 있다고 예상할 수 있었으며 $4.6mFcm^{-2}$의 축전용량값을 보였다. Fig. 3는 1 M의 황산용액에서 나노동공백금층이 형성된 신경탐침 전극과 형성 전의 전기화학적 표면변화를 비교분석한 결과로서 나노동공 백금층의 형성 전/후의 전류응답 특성이 상이하게 나타났다. 나노동공 백금층의 실표면적 극대화로 인한 전류응답수치 또한 크게 향상 되었으며, 0~-0.25 V 영역에서의 수소 흡착에 따른 환원곡선은 전형적인 백금 특성을 보여주는 결과로 판단 할 수 있다. Table 1는 기존에 연구되었던 신경탐침들과 본 연구에서 제작된 나노동공 백금을 갖는 신경탐침의 임피던스와 캐패시턴스 특성을 비교한 결과이다. 결론: 본 연구에서는 실리콘 신경탐침 끝단에 집적된 전극상에 전해도금법을 이용하여 높은 거칠기값을 갖는 나노동공 백금층을 형성하고 전극 계면상의 낮은 임피던스를 검출을 하였다. 나노동공 백금층을 갖는 신경탐침은 순환전압전류법을 통해 극대화된 실표면적을 극대화를 확인할 수 있었으며, 극대화된 검출 전극면은 저 임피던스 측정에 용이함을 실험을 통해서 증명할 수 있었다. 따라서, 높은 거칠기값의 나노동공 백금층은 초소형화된 신경탐침상에 집적되는 전극면적소형화와 다수의 전극 구현에 효과적일 것으로 판단되며 보다 정확한 신경신호 검출을 통한 뇌질환의 명확한 이해에 유망할 것으로 판단된다.

• Journal of Korea Water Resources Association
• /
• v.37 no.11
• /
• pp.969-978
• /
• 2004

According to the report of hydrologic modeling study, from a quantitative point of view, a lumped model is more efficient than a distributed model. A distributed model has to simplify geospatial characteristics for the shake of restricted application on computer calculation and field observation. In this reason, a distributed model can not help having some errors of water quantity modelling. However, considering a distribution of rainfall-runoff reflected spatial characteristics, a distributed model is more efficient to simulate a flow of surface water, The purpose of this study is modeling of spatial rainfall-runoff of surface water using grid based distributed model, which is consisted of storage function model and essential basin-channel parameters( slope, flow direction & accumulation), and that procedure is able to be executed at a personal computer. The prototype of this model is developed in Heongseong Multipunose Dam basin and adapted in Hapchon Multipurpose Dam basin, which is larger than the former about five times. The efficiency coefficients in result of two dam basin simulations are more than about 0.9, but ones at the upstream water level gauge station meet with bad result owing to overestimated rating curves in high water level. As a result of this study, it is easily implemented that spatially distributed rainfall-runoff model using GIS, and geophysical characteristics of the catchment, hereafter it is anticipated that this model is easily able to apply rainfall data by real time.

• Radiation Oncology Journal
• /
• v.8 no.1
• /
• pp.1-6
• /
• 1990

In the present study, a perfluorchemical emulsion (Fluosol-DA $20\%$) did not alter $D_o\;and\;D_q$ values on cell survival curve, indicating that the lack of a direct effect of Fluosol-DA $20\%$ on cellular radiosensitivity in vitro. The effect of Fluosol-DA $20\%$ injection in combination with carbogen breathing was determined on the hypoxic cell fraction in SCK tumors. The hypoxic cell fraction in control SCK tumors was 0.39. This value decreased to 0.05 when the mice were i.v. injected with 12 ml/kg of Fluosol-DA $20\%$ in a carbogen atomosphere. The measured mean and median $PO_2$ values with a microelectrode in the control tumors was 9 mmHg and 4 mmHg, respectively. The treatment of the SCK tumors in the host mice with injected Fluosol-DA $20\%$ in combination with carbogen breathing increased the mean and median $PO_2$ values to 67 mmHg and 62 mmHg, respectively. Using carbogen breathing alone caused a moderate increase of tumor $PO_2$. But Fluosol-DA $20\%$ injection alone caused little change $PO_2$ in the tumor. It was concluded that the combination of Fluosol-DA injection and carbogen breathing is an effective means to improve oxygenation of tumors.

• Applied Chemistry for Engineering
• /
• v.18 no.4
• /
• pp.356-360
• /
• 2007

Recently, dye sensitized solar cells (DSSCs) composed of nanoporous $TiO_2$, light-sensitive dyes, electrolytes, and counter electrode have been received much attention. Nanostructured particles with higher surface area for the higher adsorption of Ru (II) dye are required to increase the quantity of light absorption. Also, it has been reported that the key factor to achieve high energy conversion efficiency in the photoelectrode of DSSC is the heat treatment of $TiO_2$ paste with acid addition. In this work, we investigated the influence of acid treatment of $TiO_2$ solar cell on the photovoltaic performance of DSSC. The working electrodes fabricated in this work were characterized by X-ray photoelectron spectroscopy (XPS), extended X-ray absorption fine structure (EXAFS), field emission scanning electron microscope (FE-SEM), and atomic force microscope (AFM). In addition, the influence of nanostructured photoelectrode fabricated with the acid-treated paste on the energy conversion efficiency was investigated on the basis of photocurrent-potential curves. It was found that the influence of acid-treated paste on the photovoltaic efficiency was significant.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.36 no.4
• /
• pp.314-321
• /
• 2000

In order to obtain the fundamental data on the auditory thresholds of fishes for catching method using low frequency sound, the auditory thresholds of coralfish Chromis notatus were measured in the presence of masking noise in the spectrum level range of 73~83dB re l$\mu$Pa/√Hz by heartbeat conditioning technique using pure tones coupled with a delayed electric shock. Critical ratios were about 23~41dB at measurement frequency, The critical ratio increased almost linearly with increasing frequency from 500Hz. The noise spectrum level at the start of masking was about 60~65dB. This suggests that hearing of coralfish is masked in the natural environment with the noise spectrum level above 60dB. The sound pressure level of which the signal sound of 300Hz is recognized by coralfish under the ambient noise is above 88dB and the critical ratio of them is above 23dB. The hearing index of coralfish with ambient noise was 81.

• Journal of the Korean Electrochemical Society
• /
• v.21 no.2
• /
• pp.39-46
• /
• 2018

Many studies on the electrochemical performance of Li secondary batteries have been obtained using coin-type cells due to the ease of assembly, low cost and ensuring reproducibility. The coin-type cell consists of a case, a gasket, a spacer disk, and a wave spring. These structural features require a greater amount of liquid electrolyte to assemble than other types of cells such as laminated cells and cylindrical cells. Nevertheless, little research has been conducted on the effect of excess liquid electrolytes on the electrochemical performances of Li secondary batteries. In this study, we investigate the effect of different amounts of electrolyte on the coin-type cells. The amount of electrolytes is adjusted to 30 and $100mg\;mAh^{-1}$. Cycle performances at room temperature ($25^{\circ}C$) and high temperature ($60^{\circ}C$) and high voltage are performed to investigate the electrochemical properties of the different amount of electrolytes. In the case of the unit cell including the electrolyte of $30mg\;mAh^{-1}$, the discharging capacity retention characteristic is excellent in comparison with the case of $100mg\;mAh^{-1}$ under the high temperature and high voltage condition. The former shows a larger increase in internal resistance than the latter, confirming that the amount of electrolyte significantly influences the discharge capacity retention characteristics of the battery.

• Journal of the Korean Chemical Society
• /
• v.44 no.5
• /
• pp.453-459
• /
• 2000

FED has deserved an intensive attentioD as a new flat panel display. The present investigationaims at undemtanding the photoluminescence and cathodoluminescent properties of hGaO$_3$: $Eu^{3+}$ phosphor bytaking into account the possibility that this phosphor could be applied for FED. In onler to investigate on.sucha detailed behavior; 8everM experimental skil18 Je conducted to the LaGaO$_3$:$Eu^{3+}$ phosphoL The excimtion srectrum artd emission spectmn were rnezsured in the UV range and then decay curve of $^5D_0$+$^7F_j$transitions\vas examined. The decay behavior of $^5D_0$ emission was anMyzed by a newly Iuoposed cross-relaxation mech-ani8In in asswiation with inteFwnter di1ffision (or migration). The cross-mlaxation from $^5D_0$ to CTB (Cha'geTransfer Band) wuld be a quite retsonable by considering the excitation spectrum. It could be also found thatthe quenching type was changed from ditfrsion controlled process to the direct quenching process -s inJeasing $Eu^{3+}$ oncntration.

• Korean Journal of Materials Research
• /
• v.8 no.6
• /
• pp.493-498
• /
• 1998

CdTe films were deposited by close spaced sublimation with various substrate temperatures, cell areas, and thicknesses of CdTe and ITO layers and their effects on the CdS/CdTe solar cells were investigated. The resistivity of CdTe layers employed in this study was 3$\times$ $10^{4}$$\Omega$cm For constant substrate temperature the optimum substrate ternperature for CdTe deposition was $600^{\circ}C$. To obtain larger grain size and more compact microstructure, CdTe film was initially deposited at 62$0^{\circ}C$, and then deposited at 54$0^{\circ}C$. The CdTe film was annealed at 62$0^{\circ}C$ and $600^{\circ}C$ sequentially to maintain the CdTe film quality. The photovoitaic cell efficiency improved by the "two-wave" process. For constant substrate temperature, the optimum thickness for CdTe was 5-6$\mu m$. Above 6$\mu m$ CdTe thickness, the bulk resistance of CdTe film degraded the cell performance. As the cell area increased the $V_{oc}$ remained almost constant, while $J_{sc}$ and FF strongly decreased because of the increase of lateral resistance of the ITO layer. The optimum thickness of the ITa layer in this study was 300~450nm. In this experiment we obtained the efficiency of 9.4% in the O.5cm' cells. The series resistance of the cell should be further reduced to increase the fill factor and improve the efficiency.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.277-277
• /
• 2007

$(Bi,La)_4Ti_3O_{12}$ (BLT) 물질은 결정 방향에 따른 강한 이방성의 강유전 특성을 나타낸다. 따라서 BLT 박막을 이용하여 FeRAM 소자 등을 제작하기 위해서는 결정의 방향성을 세심하게 제어하는 것이 매우 중요하다. 현재까지 연구된 BLT 박막의 방향성 조절 결과를 보면, BLT 박막을 스핀 코팅 법 (spin coating method)으로 중착하고, 핵생성 열처리 단계를 조절하여 무작위 방향성 (random orientation)을 갖는 박막을 제조하는 방법이 일반적이었다. 그런데 이러한 스핀 코팅법에서의 핵생성 단계의 제어는 공정 조건 확보가 너무 어려운 단점이 있다. 이러한 어려움을 극복할 수 있는 대안은 스퍼터링 증착법 (sputtering deposition method), PLD법 (pulsed laser deposition method) 등과 같은 PVD (physical vapor deposition) 법의 증착방법을 적용하는 것이다. PVD 법으로 증착하는 경우에는 이미 박막 내에 무수한 결정핵이 존재하기 때문에 핵생성 단계가 필요 없게 된다. PVD 증착법의 적용을 위해서는 타겟 (target)의 제조 및 평가 실험이 선행되어야 한다. 그런데 벌크 BLT 재료의 소결공정 조건과 전기적 특성에 관한 연구 결과는 거의 발표 되지 않고 있다. 본 실험에서는 $Bi_2O_3$, $TiO_2$ and $La_2O_3$ 분말을 이용하여 최적의 조성을 구하기 위하여 Bi양을 변화시키며 타겟을 제조 하였다. 혼합된 분말을 하소 후 pallet 형태로 성형하여 소결을 실시하였다. 시편을 1mm 두께로 연마하고, 표면에 silver 전극을 인쇄하여 전기적 특성을 측정하였다. Bi양이 3.28몰 첨가된 조성에서 최대의 잔류분극 (2Pr) 값을 얻었고, 이때의 값은 약 $18{\mu}C/cm^2$ 정도였다. 최적화된 조성 ($Bi_{3.28}La_{0.75}Ti_3O_{12}$)으로 BLT 타겟을 제조하여 PLD법으로 박막을 제조하였다. 박막 제조 시 압력은 $1{\times}10^{-1}\;{\sim}\;1{\times}10^{-4}\;Torr$ 범위에서 변화시켰다. $1{\times}10^{-1}\;Torr$ 압력을 제외하고는 모든 압력에서 BLT 박막이 증착되었다. 중착된 박막을 $650\;{\sim}\;800^{\circ}C$에서 30분간 열처리를 실시하고 전기적 특성을 평가한 결과, $1{\times}10^{-2}\;Torr$에서 증착한 박막에서 양호한 P-V (polarization-voltage) 이력곡선을 얻을 수 있었고, 이때의 잔류분극 (2Pr) 값은 약 $6\;{\mu}C/cm^2$ 이었다. 주사전자현미경 (SEM)을 이용하여 BLT 박막 표면의 미세구조도 관찰하였는데, 스핀코팅 법으로 증착한 경우에 관찰되었던 조대화된 입자들은 관찰되지 않았고, 상당히 양호한 입자 크기 균일도를 나타내었다.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.6
• /
• pp.15-22
• /
• 2012

A performance index of singalized intersections is a standard to optimize signal control variables and to manage traffic flow. Traffic delays is generally used to minimize the average delay time on intersections or networks, progression efficiency is used to improve travel speed of main cooridors or to provide transit signal priority. We manage traffic flows with only selecting one index between delays and progression according to the objective of traffic management and field characteristics. In real field, the driver's satisfaction is high in any performance criteria when the waiting time is shorter and the unnecessary stop in front of traffic is smaller. This paper aims to develop simulation model to represent real progression with concurrently considering delays and progression. In order to reflect an effect of level of traffic volumes and residual queues which don't be considered in prior progression model, we apply shockwave model with flow-density diagram. We derive Cell Transmission Model of Daganzo in order to develop the delay index and the progression index for the macroscopic simulation model. In order to validate the effect, we analysis traffic delays and progression efficiency with comparing this model to Transyt-7F and PASSER V.