• Horticultural Science & Technology
• /
• v.33 no.5
• /
• pp.796-804
• /
• 2015

The present study investigated the plant growth characteristics, dormancy breaking, yield, and biological activity properties (contents of flavonoid and phenolic compounds, nitrite scavenging activity, and the survival rate of lung cancer) of four asparagus cultivars. It aimed to examine selection possibilities for high efficacy cultivar to promote biological activity in asparagus cultivation in South Korea. The results showed that the number of asparagus buds and root fresh and dry weight of 'Jersey Giant', 'Jersey Supreme', and 'NJ953' were higher than those of 'UC157' cultivar, and there were no differences in the number of roots. The dormancy breaking period of 'Jersey Supreme' was prolonged compared to the other cultivars. 'Jersey Giant' and 'NJ953' had more total spears, and greater spear diameter, and yield than other cultivars. Total flavonoid content was unaffected by cultivar and was higher in ethanol extraction than in hot water extraction. Total phenolic compound content was the lowest in 'NJ953' for both hot water and ethanol extracts, whereas in the ethanol extraction, 'UC157' had the highest, with $39.23mg{\cdot}L^{-1}$. 'Jersey Giant', 'Jersey Supreme', and 'NJ953' all showed greater than 70% nitrite scavenging activity. In the case of ethanol extraction, the survival rates of lung cancer in extracts from 'Jersey Giant', 'Jersey Supreme', and 'UC157' were lower than 'NJ 953' cultivar, regardless of extraction concentration. The survival rate of lung cancer was lower in hot water extraction than in ethanol extraction, so that the consumption of asparagus is also expected to be helpful in preventing lung cancer. The growth characteristics and biological activity effects of edible asparagus that were identified in the present study are expected to be useful in selection of high efficacy cultivars for biological activity and utilization.

• Korean journal of food and cookery science
• /
• v.26 no.6
• /
• pp.745-752
• /
• 2010

The purpose of this study was to investigate the perceptions and preferences held by the general public concerning jeungpyun. Self-administered questionnaires were collected from 484 residents in Daegu and Gyeongbuk. The questionnaires contained questions on the recognition of jeungpyun, purchasing, frequency, purchasing factor, and preferences for and purchasing of jeungpyun containing different kinds of makgeoilli. According to the survey, females were higher than males (31.4%) by 69.7%, and that for ages 20~30' was the highest. Most of them were students (39.7%), and 81.7% of them had an income of under 4,000,000 won per month. The results of the eating frequency rate showed that over half of the people had jeungpyun once a month, and the recognition of jeungpyun for females (3.63) was higher than that for males (3.09). The respondents who joyed eating jeungpyun mentioned 'good taste and texture' as the top reason for eating jeungpyun, and 'different food and bad flavor' was mentioned as the reason for disliking it. As a result, popularization of jeungpyun was based on two factors: 1) fundamental factor and 2) external factor, and both significantly influence the preference for and purchasing of jeungpyun,-. Therefore, future studies should be conducted to improve preference for jeungpyun as a functional food. The results of preference and purchasing show that jeungpyun prepared with rice, rubus coreanum miquel, black bean, grape and green mume makgeoilli.

• Journal of Life Science
• /
• v.26 no.10
• /
• pp.1121-1129
• /
• 2016

High-molecular-weight glutenin subunits (HMW-GSs) are extremely important determinants of the functional properties of wheat dough. Transgenic rice plants containing a wheat TaGlu-Ax1 gene encoding a HMG-GS were produced from the Korean wheat cultivar ‘Jokyeong’ and used to enhance the bread-making quality of rice dough using the Agrobacterium-mediated co-transformation method. Two expression cassettes with separate DNA fragments containing only TaGlu-Ax1 and hygromycin phosphotransferase II (HPTII) resistance genes were introduced separately into the Agrobacterium tumefaciens EHA105 strain for co-infection. Rice calli were infected with each EHA105 strain harboring TaGlu-Ax1 or HPTII at a 3:1 ratio of TaGlu-Ax1 and HPTII. Among 210 hygromycin-resistant T₀ plants, 20 transgenic lines harboring both the TaGlu-Ax1 and HPTII genes in the rice genome were obtained. The integration of the TaGlu-Ax1 gene into the rice genome was reconfirmed by Southern blot analysis. The transcripts and proteins of the wheat TaGlu-Ax1 were stably expressed in rice T₁ seeds. Finally, the marker-free plants harboring only the TaGlu-Ax1 gene were successfully screened in the T₁ generation. There were no morphological differences between the wild-type and marker-free transgenic plants. The quality of only one HMW-GS (TaGlu-Ax1) was unsuitable for bread making using transgenic rice dough. Greater numbers and combinations of HMW and LMW-GSs and gliadins of wheat are required to further improve the processing qualities of rice dough. TaGlu-Ax1 marker-free transgenic plants could provide good materials to make transgenic rice with improved bread-making qualities.

• Journal of the Korean Wood Science and Technology
• /
• v.32 no.4
• /
• pp.8-17
• /
• 2004

Antifungal, antibacterial, and antioxidative activities of ethanol extracts from 65 families 263 species were investigated to select tree species for the utilization of natural fungicide or preservative resources. The antifungal activities of extracts from wood, leaf and bark were measured as hyphal growth inhibition rate using four plant pathogenic and five wood rotting fungi. High inhibitory effect on the fungi growth was found in five species of Pinaceae (Pinus koraiensis, P. rigida, P. densiflora, P. banksiana. Cedrus deodara), three species of Cupressaceae (Juniperus rigida, J. chinensis, Chamaecyparis obtusa) and three species of Leguminosae (Albizzia julibrisssin, Sophora japonica, Maackia amurensis), respectively. Antibacterial activities of ethanol extracts were determined by means of disc-agar plate diffusion method using three gram-positive and five gram-negative bacteria. The ethanol extracts, which showed prominent effect on the suppression of bacteria growth, were six species of Betulaceae (Carpinus tschonoskii, C. coreana, C. laxiflora, Alnus hirsuta, A. firma, Betula schmidtii), five species of Fagaceae (Castanopsis cuspidata var. sieboldii, Quercus serrata, Q. mongolica, Q aliena, C crenata), four species of Euphorbiaceae (Aleurites fordii, Sapium sebiferum, S japonicum Mallotus japonicus) and three species of Elaeagnaceae (Elaeagnus umbellata, Elaeagnus glanbra, Elaeagnus macrophylla). According to these results, the extracts from Zelkova serrata, Pinus densiflora, Maackia amurensis, Chamaecyparis obtusa and Juniperus chinensis could be available for natural fungicide or food preservatives, because ethanol extracts from these species indicated excellent antifungal and antibacterial activities. In order to test antioxidative activities of ethanol extracts, free radical scavenging method was adopted with 1,1-diphenyl-2-picrylhydrohydrazyl (DPPH). Free radical scavenging activity was proved very high in the extracts of eight species of Rosaceae (Eriobotrya japonica, Prunus takesimensis, P yedoensis, P padus, P armeniaca var. ansu, Chaenomeles sinensis, Stephanandra incisa, Rosa multiflora) and five species of Ericaceae (Rhododenron mucronulatum, R. scblippenbacbii, R. yedoense var. poukhanense, Vaccinium bracteatum, V oldbami), resvectively. It turned out from this study that only six species among 48 species of Rosaceae showed less than 80% free radical scavenging activity. As a consequences, it could be deduced that the components effective on antioxidative activity commonly exist in Rosaceae plant family.

• Journal of the Korean Wood Science and Technology
• /
• v.17 no.3
• /
• pp.8-19
• /
• 1989

The proportion of imported wood has been now over 80% of raw materials needed in the wood industry, and therefore, many of studies on the substitution of domestic wood for imported wood and on the increasing the utilization rate of domestic species have been attempted and considered as very important projects to solve. But these trials were practically restricted by several disadvantages of domestic species. such as a small diameter, variety of species, and irregularity of wood physical or chemical characteristics, etc. From a this point of view, this study was carried out to investigate solid wood bending properties of sample trees and then to develop their end uses. The species of sample trees were Pinus densiflora S. et Z., Pinus rigida Mill., and Larix leptolepis Gord. which have large growing stocks but Pinus rigida and Larix leptolepis have not been used well because of their poor qualities. The results obtained were as follows: 1. The optimum conditions for solid wood bending processing of Pinus densiflora, Pinus rigida, and Larix leptolepis are showed in Table 6. 2. The minimum solid-bending radii of Pinus densifjora, Pinus rigida, and Larix ieptolepls were 260mm, 240mm, and 300mm, respectively in steaming treatment.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.5-5
• /
• 2011

The research and development of hybrid electric vehicle (HEV), plug-in hybrid electric vehicle (PHEV) and electric vehicle (EV) are intensified due to the energy crisis and environmental concerns. In order to meet the challenging requirements of powering HEV, PHEV and EV, the current lithium battery technology needs to be significantly improved in terms of the cost, safety, power and energy density, as well as the calendar and cycle life. One new technology being developed is the utilization of composite cathode by mixing two different types of insertion compounds [e.g., spinel $LiMn_2O_4$ and layered $LiMO_2$ (M=Ni, Co, and Mn)]. Recently, some studies on mixing two different types of cathode materials to make a composite cathode have been reported, which were aimed at reducing cost and improving self-discharge. Numata et al. reported that when stored in a sealed can together with electrolyte at $80^{\circ}C$ for 10 days, the concentrations of both HF and $Mn^{2+}$ were lower in the can containing $LiMn_2O_4$ blended with $LiNi_{0.8}Co_{0.2}O_2$ than that containing $LiMn_2O_4$ only. That reports clearly showed that this blending technique can prevent the decline in capacity caused by cycling or storage at elevated temperatures. However, not much work has been reported on the charge-discharge characteristics and related structural phase transitions for these composite cathodes. In this presentation, we will report our in situ x-ray diffraction studies on this mixed composite cathode material during charge-discharge cycling. The mixed cathodes were incorporated into in situ XRD cells with a Li foil anode, a Celgard separator, and a 1M $LiPF_6$ electrolyte in a 1 : 1 EC : DMC solvent (LP 30 from EM Industries, Inc.). For in situ XRD cell, Mylar windows were used as has been described in detail elsewhere. All of these in situ XRD spectra were collected on beam line X18A at National Synchrotron Light Source (NSLS) at Brookhaven National Laboratory using two different detectors. One is a conventional scintillation detector with data collection at 0.02 degree in two theta angle for each step. The other is a wide angle position sensitive detector (PSD). The wavelengths used were 1.1950 ${\AA}$ for the scintillation detector and 0.9999 A for the PSD. The newly installed PSD at beam line X18A of NSLS can collect XRD patterns as short as a few minutes covering $90^{\circ}$ of two theta angles simultaneously with good signal to noise ratio. It significantly reduced the data collection time for each scan, giving us a great advantage in studying the phase transition in real time. The two theta angles of all the XRD spectra presented in this paper have been recalculated and converted to corresponding angles for ${\lambda}=1.54\;{\AA}$, which is the wavelength of conventional x-ray tube source with Cu-$k{\alpha}$ radiation, for easy comparison with data in other literatures. The structural changes of the composite cathode made by mixing spinel $LiMn_2O_4$ and layered $Li-Ni_{1/3}Co_{1/3}Mn_{1/3}O_2$ in 1 : 1 wt% in both Li-half and Li-ion cells during charge/discharge are studied by in situ XRD. During the first charge up to ~5.2 V vs. $Li/Li^+$, the in situ XRD spectra for the composite cathode in the Li-half cell track the structural changes of each component. At the early stage of charge, the lithium extraction takes place in the $LiNi_{1/3}Co_{1/3}Mn_{1/3}O_2$ component only. When the cell voltage reaches at ~4.0 V vs. $Li/Li^+$, lithium extraction from the spinel $LiMn_2O_4$ component starts and becomes the major contributor for the cell capacity due to the higher rate capability of $LiMn_2O_4$. When the voltage passed 4.3 V, the major structural changes are from the $LiNi_{1/3}Co_{1/3}Mn_{1/3}O_2$ component, while the $LiMn_2O_4$ component is almost unchanged. In the Li-ion cell using a MCMB anode and a composite cathode cycled between 2.5 V and 4.2 V, the structural changes are dominated by the spinel $LiMn_2O_4$ component, with much less changes in the layered $LiNi_{1/3}Co_{1/3}Mn_{1/3}O_2$ component, comparing with the Li-half cell results. These results give us valuable information about the structural changes relating to the contributions of each individual component to the cell capacity at certain charge/discharge state, which are helpful in designing and optimizing the composite cathode using spinel- and layered-type materials for Li-ion battery research. More detailed discussion will be presented at the meeting.

• The Journal of Society for e-Business Studies
• /
• v.22 no.2
• /
• pp.137-152
• /
• 2017

The decline in the price of IT devices and the development of the Internet have created a new field called Internet of Things (IoT). IoT, which creates new services by connecting all the objects that are in everyday life to the Internet, is pioneering new forms of business that have not been seen before in combination with Big Data. The prospect of IoT can be said to be unlimited in its utilization. In addition, studies of standardization organizations for smooth connection of these IoT devices are also active. However, there is a part of this study that we overlook. In order to control IoT equipment or acquire information, it is necessary to separately develop interworking issues (IP address, Wi-Fi, Bluetooth, NFC, etc.) and related application software or apps. In order to solve these problems, existing research methods have been conducted on augmented reality using GPS or markers. However, there is a disadvantage in that a separate marker is required and the marker is recognized only in the vicinity. In addition, in the case of a study using a GPS address using a 2D-based camera, it was difficult to implement an active interface because the distance to the target device could not be recognized. In this study, we use 3D Depth recognition camera to be installed on smartphone and calculate the space coordinates automatically by linking the distance measurement and the sensor information of the mobile phone without a separate marker. Coordination inquiry finds equipment of IoT and enables information acquisition and control of corresponding IoT equipment. Therefore, from the user's point of view, it is possible to reduce the burden on the problem of interworking of the IoT equipment and the installation of the app. Furthermore, if this technology is used in the field of public services and smart glasses, it will reduce duplication of investment in software development and increase in public services.

• Journal of the Korean Geosynthetics Society
• /
• v.17 no.2
• /
• pp.41-49
• /
• 2018

The purpose of this study is to fabricate a full scale road embankment using lightweight air foamed soil as a soil material on soft ground and to investigate its material characteristics and behavior in order to promote dredged soil utilization and minimize ground improvement. As a result of the laboratory test of the onsite mixed samples, the total unit weight of the specimens decreased almost linearly until curing 28 days. In particular, the total unit weight after 28 days of curing was reduced to about 81% of the slurry state before curing, which will be useful in the formulation of similar native soil materials in the future. The unconfined compressive strength began to decrease with the 14th day of curing as shown in the previous study. When the cement content is increased, the strength decreases sharply at a small strain change after the occurrence of the maximum compressive strength, and the maximum strength is exhibited in a range of a smaller axial strain than normal range. The settlement at the surface layer of the ground due to the lightweight embankment was about 1 / 2.75 of the soil embankment and was in agreement with the unit weight ratio (1 / 2.7) of the embankment materials. This indicates the cause and effect of the settlement due to the difference in self weight of the embankments. Also, the difference in settlement between soil and lightweight embankment increased with increasing depth. This shows that the difference in the point at which the settlement is terminated is clear. The ground horizontal displacement under the lightweight embankment was about 15~20% smaller than that of the soil embankment and the depth of occurrence was also 4.5~5.0m shallower in the lightweight embankment.

• Journal of Animal Science and Technology
• /
• v.45 no.3
• /
• pp.387-396
• /
• 2003

This experiment was carried out to compare the effects of feeding commercial formula feed and rice straw separately (control) versus a total mixed ration (TMR) on productivity of Hanwoo steers in late stage of fattening and on ruminal fermentation characteristics and digestibilities. Ruminal digesta from the cannulated cattle were sampled at 0, 1, 2, 3, 5, 8 hour after feeding. The steers fed TMR consumed 7.4kg per day and there was no difference between feeding systems. Daily weight gain was not significantly (P>0.05) between feeding systems, however, TMR group showed lower daily gain than control group. The amount of feed consumption per kg weight gain was higher in TMR group than control group (10.5kg and 9.7kg, respectively), resulting in a greater efficiency of feed utilization for gain. In the result of appearance rates of quality grade A were 33% higher for TMR group than those in control group. Appearance rates of grade 1 showed 56% and 75% when fed the control and TMR, respectively. Digestibilities of dry matter, crude protein, crude fiber and gross energy for TMR treatment were significantly higher (P<0.01) than those of control. Prior to feeding (0 h) and each subsequent hour, the TMR resulted in higher rumen pH (P<0.05) when compared with control ration. The concentration of NH3-N for TMR treatment maintained at higher level up to 8hr after feeding, especially increased up to 28.2mg/$d\ell$ during 1-2 hour which was two times (P<0.05) more than control. The amount of total VFA showed same trends between feeding systems. However, the ratios of branched chained fatty acid such as iso-butyric acid and iso-valeric acid for TMR treatment were significantly(P<0.01) higher than control for 3-5hr. Results showed that TMR in these trials is effective feeding system for fattening Hanwoo steers in the respect of ruminal characteristics, total tract digestibility and productivities.

• Journal of the Korean Wood Science and Technology
• /
• v.42 no.6
• /
• pp.635-645
• /
• 2014

The anatomical characteristics of eight major wood species planted in Indonesia were investigated to provide valuable information for their effective utilization. The growth-ring boundaries of Damar and Sumatran pine were indistinct. Resin canal was found in Sumatran pine but it was not observed in Damar. Cupressoid pit and taxodioid pit were found in Damar and window-like pit and pinoid pit were observed in Sumatran pine. Tracheid length of Damar and Sumatran pine was shorter than $3,000{\mu}m$. There were uniseriate rays in Damar and Sumatran pine and fusiform ray in Sumatran pine. All the hardwood species observed in this study were diffuse-porous. They had different vessel groups, i.e., solitary pore in Afrika and Simpur Batu, pore cluster in Angsana and mostly 2-4 rows of radial pore multiple in Mahoni. Mindi and Trembesi had mostly 2-3 rows of radial pore multiple with paratracheal parenchyma as aliform and confluent types. Afrika, Mahoni and Simpur Batu showed heterocellular rays which composed of procumbent cells in the body and mostly 1-2 rows of upright and/or square cells in the margin. All ray cells procumbent was observed in Angsana, Mindi and Trembesi. The large rays commonly exceeding 1 mm in height and ray width of 3~6 cells were observed in Simpur Batu. The other five hardwood species showed ray width of 1~3 cells. Vessel number per $mm^2$ of Angsana and Simpur Batu was higher than those of the other hardwood species. The length of wood fiber and tracheid showed a tendency to increase from pith to bark. By IAWA list, fiber length of hardwoods was classified into long in Simpur Batu and short in Angsana and Trembesi.