• Journal of radiological science and technology
• /
• v.39 no.2
• /
• pp.199-208
• /
• 2016

$^{99}mTc-MAG_3$ Renal scan is a method that acquires dynamic renal scan image by using $^{99}mTc-MAG_3$ and dynamically visualizes process of radioactive agent being absorbed to kidney and excreted continuously. Once the test starts, ratio in both kidneys in 1~2.5 minutes was measured to obtain split renal function and split renal function can be expressed in ratio based on overall renal function. This study is based on compares split renal function obtained from data acquired from posterior detector, which is a conventional renal function test method, with split renal function acquired from the geometric mean of values obtained from anterior and posterior detectors, and studies utility of attenuation compensation depending on difference in geometric mean kidney depth. From July, 2015 to February 2016, 33 patients who undertook $^{99}mTc-MAG_3$ Renal scan(13 male, 20 female, average age of 44.66 with range of 5~70, average height of 160.40cm, average weight of 55.40kg) were selected as subjects. Depth of kidney was shown to be 65.82 mm at average for left and 71.62 mm at average for right. In supine position, 30 out of 33 patients showed higher ratio of deep-situated kidney and lower ratio of shallow-situated kidney. Such result is deemed to be due to correction by attenuation between deep-situated kidney and detector and in case where there is difference between the depth of both kidneys such as, lesions in or around kidney, spine malformation, and ectopic kidney, ratio of deep-situated kidney must be compensated for more accurate calculation of split renal function, when compared to the conventional test method (posterior detector counting).

• Journal of Aquaculture
• /
• v.21 no.4
• /
• pp.272-277
• /
• 2008

We investigated the growth and survival in seedling production, and growth performance was compared with the different rearing tanks and protein source of formulated feed for juvenile Pacific bluefin tuna Thunnus orientalis (PBT). The survival rate at the end of nursery culture at 30 days after hatching was $0.69{\pm}0.40%$, and total length and mean body weight were $49.83{\pm}2.52\;mm$ and $1.03{\pm}0.09\;g$, respectively. Growth performance has no significant difference in fish reared by different tanks forms for 10 days. In order to develop an artificial diet, we evaluated the dietary utility of enzyme treated fish meal (Bio-CP, BIO) for juvenile PBT. Only diet BIO sustained similar growth and higher feed efficiency, and final carcass lipid content as compared to those of Sand lance (SL) These results revealed that BIO-CP a suitable dietary protein source, could sustain growth of PBT.

• Journal of Korean Society of Forest Science
• /
• v.46 no.1
• /
• pp.1-9
• /
• 1980

This study was carried out to examine the substitution possibility into fiber pot instead of Jiffy pot for the good transplanting. Fiber pot was made of fiber, wood waste particle, and bark powder (10% of the particle weight) and also latex was added into the furnish as a binder. The pots were sprayed with just enough urea solution to prevent nitrogen deficiency of pot media coming from the breakdown of wood fiber in the pot wan during the plant growing. The utility of fiber pot was compared with that of Jiffy pot in the service test of two tree species under a green-house condition. The results obtained can be summarized as follows ; 1. Fiber pot made of 30% wood fiber+70% particle including 10% of bark powder, and 3%-latex has shown a good results like that of Jiffy pot in the sp. gr., tear factor and burst factor. For water absorption, fiber pot made of 50% fiber+50% particle, and 3%-latex got the best result. In the consideration of the above physical and mechanical properties of the fiber pot for good root penetration through the pot wall and facile handling, fiber pot made of 30% fiber+70% particle, and 3%-latex may be seemed to be good. 2. There were no harms in sapling growth in fiber pot as well as in Jiffy pot. The root penetration ability through the fiber pot was slightly inferior to that of Jiffy pot, and yet the pot damage through transportation seemed to be slighter in fiber pot than in Jiffy pot.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.16
• /
• pp.7039-7044
• /
• 2015

Background: Many functional molecules controlling diverse cellular function are included in low-molecular weight proteins and peptides. Materials and Methods: To identify proteins controlling function in lung adenocarcinomas (AC), we performed two-dimensional gel electrophoresis employing tricine-SDS polyacrylamide in the second dimension (tricine 2-DE). This system was able to detect proteins under 1 kDa even with post-translational modifications. To confirm the utility of detected proteins as novel tumor markers for AC, we performed immunohistochemical analysis using 170 formalin-fixed and paraffin-embedded lung AC tissues. Results: Tricine 2-DE revealed that five proteins including S100A16 were overexpressed in lung AC-derived cells compared with lung squamous cell carcinoma, small cell carcinoma, and large cell neuroendocrine carcinoma-derived cells. Immunohistochemically, S100A16 showed various subcellular localization in lung cancer tissues and a membranous staining status was correlated with the T-factor (P=0.0008), pathological stage (P=0.0015), differentiation extent (P=0.0001), lymphatic invasion (P=0.0007), vascular invasion (P=0.0001), pleural invasion (P=0.0087), and gender (P=0.039), but not with the age or smoking history. More importantly, membranous staining of S100A16 was significantly correlated with a poorer overall survival of either stage I (P=0.0088) or stage II / III (P=0.0003) lung AC patients, and multivariate analysis confirmed that membranous expression of S100A16 was an independent adverse prognostic indicator (P=0.0001). Conclusions: The present results suggest that S100A16 protein is a novel prognostic marker for lung AC.

• Korean Journal of Soil Science and Fertilizer
• /
• v.32 no.1
• /
• pp.62-67
• /
• 1999

As a basic experiment to enhance the symbiotic utility of atmospheric nitrogen on soybean, host affinities and serological distribution of Bradyrhizobium japonicum indigenous to five Korean upland soils were measured. Based on nodulation, the symbiotic affinities between indigenous B, japonicum and eight soybean cultivars were remarkably different among soil inocula. On the whole, the averaged affinities of B. japonicum populations to soybeans were favorable in order of Goseong > Milyang > Suweon soils, but those in Iksan and Namjeju soils were not, especially for Danweonkong, Jangkyeongkong, and Eunhakong soybean cultivars. Regression analyses between nodules mass and shoot dry weight of soybean yielded model with $R^2=0.51$ for Goseong, $R^2=0.45$ for Milyang, $R^2=0.38$ for Iksan, $R^2=0.28$ for Namjeju, and $R^2=0.24$ for Suweon soils. B. japonicum from sampled soils were serologically fell into more than seven serogroups such as YCK 117(34.1%), YCK 141(6.5%), YCK 321(6.5%), YCK 445(4.7%), YCK 338(2.9%), YCK 150(1.2%), YCK 258(0.6%). The dominant serogroup YCK 117 was distributed 51.9 for Namjeju, 45.8 for Goseong, 41.7 for Iksan. 34.2 for Sueveon, and 11.1% for Milyang soils.

• Journal of the Korean earth science society
• /
• v.34 no.6
• /
• pp.575-587
• /
• 2013

DC electrical and electromagnetic survey was applied to evaluate the reserve of an iron mine site. We analyzed the borehole cores and the cores sampled from outcrops in order to decide which geophysical method was efficient for the evaluation of iron mine site and to understand the geological setting around the target area. Based on the core tests for specific weight, density, porosity, resistivity and P-wave velocity, showing that the magnetite could be distinguishable by the electrical property, we decided to conduct the electrical survey to investigate the irone mine site. According to previous studies, the DC electrical survey was known to have various arrays with high resolutions effective to the survey of the iron mine site. However it was also known that the skin depth is too shallow to grasp the deep structure of iron mine. To compensate the weakness of the DC electrical method, we applied the MagnetoTelluric (MT) survey. In addition, a Controlled Source MT (CSMT) method was also applied to make up the shortcoming of MT method which is weak for shallow targets. From the DC electrical and MT survey, we found a new low resistivity zone, which is believed to be a magnetite reserve beneath the old abandoned mine. Therefore, this study was confirmed for additional utility value.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.17 no.4
• /
• pp.3897-3920
• /
• 1975

Since the most of Korean dairy and cattle raising farms are too small to introduce western mechanized farming, it is necessary to develope small size equipments. This study has been carried to develop a rotary mower as on attachment of 8 to 10 horse powertiller which is widely spread in rural area. It will not ony be helpfull for the farmers to harvesting hay grass but also desirable to increase the power tiller utility. The protto type rotary mower designed through the fundamental investigations, has been modified and improved through the field trials, and a series of field tests has been carried to investigate its performance and economic feasibility comparing with existing vailable harvesting equipments. The results are as follows; 1. To increase the stability, two guide wheels are attached to both side of the protto type rotary mower. 2. To prevent the clinging of tall grasses, the vertical driving shafts are covered with cylindrical protectors. 3. The cutting height is adjustable in 8 steps from 2.5 to 20 centimeters by changing the length of guide wheel legs. 4. The practical Critical cutting speed were always higher than theoretical value in both case of single cutting blade and three when the cutting depth was 25 millimeter. 5. The peripheral speed of cutting blade was varied in response to the change of engine speed, mean while the peripheral speed was adequate as it was changhed from 25 to 35 meter per second when the power tiller is operated in proper working ground speed. 6. The time requirement to harvest 10 a were 88.7, 54.6 and 41.4 minutes for the first, second and third stage of ground speed respectively, and because of the difficulty of delivery, it was observed that operating with fourth stage of ground speed was not recomanendable when the grass height is taller than 90 centimeters. 7. The performance of rotary mower were 1.1-1.7, 1.4-4.0, 3.8-11.8 and 7.4-22.0 times of reciprocating mower, portable disc type cutter, hay scythe and ordinary sickle respectively. 8. When the slope exceeds, 20 degree the downward harvesting operation was impossible because of the excessive front end weight, while less than 5 degree of land slope did not effect in field operation. 9. Increased traveling spee caused higher cutting height and slight cutting failure, but seems not to effect to the gross yield, and the efficiency of cutting width were from 83 to 94 precent. 10. Tn rank of economy were rotary mower (3,2 stage operation), reciprocating mower, hay scythe, portable disc type cutter and sickle in order when the annul operation exdeeds 100 hours. From the above results, it is convinced that the protto type rotary mower is good enough to the livestock farmers as a hay harvesting equipment because of its economy, hardiness in operating and its out standing performance and hopefully it will contribute to the extension of Korean livestock farming.

• The Korean Journal of Pesticide Science
• /
• v.7 no.1
• /
• pp.58-65
• /
• 2003

Various physicochemical parameters for the active ingredients of 245 herbicides were calculated to develope a diagnosis and estimation system for utility as herbicide. The range of physico-chemical parameters for each inhibitors of photo system II (H1), acetolactate synthase (ALS) (H2) and herbicides were confirmed. The distribution ranges of 85% dependence for each physicochemical parameters were Obs.logP :$-0.90\sim4.50$, dipol moment: $1.80\sim12.22$ (debye), molecular refractivity: $53.0\sim104.0(cm^3/mol)$, polarizability: $19.0\sim37.0(\AA^3)$, HOMO energy: $-9.98\sim-7.34$ (eV), LUMO energy:$-2.76\sim0.40$ (eV), Van der Waals molecular volumes: $558.0\sim995.0(cm^3)$, molecular weight: $202.0\sim430.0$ (amu) and surface areas (Grids): $194.0\sim356.0(\AA^2)$, hydration energy: $-10.16\sim114.7$ Kcal/mol, respectively. It is suggested that MR and polarizability constants will be able to distinguish between herbicides and medicinal drugs. Results revealed that various compounds based on the range of physicochemical parameters of herbicides could be diagnosed and estimated.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.7B
• /
• pp.685-696
• /
• 2004

Real-time multimedia applications that require large amount of bandwidth need resource reservation before starting service for providing the QoS(i.e., Quality of Service). To reserve resources in advance, each reservation request has to notify its expectation on the required amount of resources and service duration. Using this information, a resource manager can schedule advance reservations. However, most existing resource management systems are adopting straightforward call admission control process (i.e., only immediate reservation) by checking currently available resources without considering the service duration. Hence, the resource management system that supports advance reservation has to manage confliction caused by indefinite service duration of immediate reservation. Even though the separation of resource pool according to type of reservation can prevent the confliction, it causes low resource utilization. In this paper, we propose an effective resource management scheme that supports both immediate and advance reservations by sharing resources dynamically. Using network cost function, the proposed scheme determines and adaptively adjusts resource boundary according to the confliction rate by varying weight parameters. And also, we define user utility function to quantify user satisfaction based on how well the reserved resource is guaranteed during service time. Simulation results using NS-2 network simulator show that the proposed scheme can achieve better resource utilization with preferable QoS than other schemes like static resource partitioning.

• Proceedings of the KWS Conference
• /
• 2002.10a
• /
• pp.235-243
• /
• 2002

Ni-base superalloys are used extensively in industry, both in aeroengines and land based turbines. About 60% by weight of most modern gas turbine engine structural components are made of Ni-base superalloys. To satisfy practical demands, the efficiency of gas turbine engines has been steadily and systematically increased by design modifications to handle higher turbine inlet or firing temperatures. However, the increase in operating temperatures has lead to a decrease in the life of components and increase in costs of replacement. Moreover, around 80% of the large frame size industrial/utility gas turbines operating in the world today were installed in the mid-sixties to early seventies and are now 25 to 30 years old. Consequently, there are greater opportunities now to repair and refurbish the older models. Basically, there are two major factors influencing the weldability of the cast alloys: strain-age cracking and liquation cracking. Susceptibility to strain-age cracking is due to the total Ti plus AI content of the alloy; Liquation cracking is due either to the presence of low melting constituents or constitutional liquation of constituents. Though Rene 41 superalloy has 4.5wt.% total Ti and Al content and falls just below the safe limit proposed by Prager et al., controlled grain size and special heat treatments are needed to obtain crack-free welds. Varying heat treatments and filler materials were used in a laboratory study, then the actual welding of service parts was carried out to verity the possibility of crack-tree weld of components fabricated from Rene 41 superalloy. The microstructural observations indicated that there were two kinds of carbides in the FCC matrix. MC carbides were located along the grain boundaries, while M$_{23}$C$_{6}$ carbide was located both inter and intra granularly. Two kinds of filler materials, Rene 41 and Hastelloy X were used to gas tungsten arc weld a patch into the sheet metal, along with varying pre-weld heat treatments. The microstructure, hardness and tensile tests were determined. The service distressed parts were categorized into three classes: with large cracks, with medium cracks and with small or no visible cracks. No significant difference in microstructure among the specimens was observed. Specimens were cut from the corner and the straight edge of the patch repair, away from the corner. The only cracks present were found to be associated with inadequate surface preparation to remove oxidation. Guidelines for oxide removal and the welding procedures developed in the research enabled crack-free welds to be produced.d.