• Computers and Concrete
• /
• v.27 no.2
• /
• pp.163-173
• /
• 2021

In this paper, the parameters of haunch height, reinforcement ratio and site condition were evaluated for the influence on the seismic performance of a composite precast fabricated utility tunnel by shaking table test and numerical simulation. The dynamic response laws of acceleration, interlayer displacement and steel strain under unidirectional horizontal seismic excitation were analyzed through four specimens with a similarity ratio of 1:6 in the test. And a numerical model was established and analyzed by the finite element software ABAQUS based on the structure of utility tunnel. The results indicated that composite precast fabricated utility tunnel with the good anti-seismic performance. In a certain range, increasing the height of haunch or the ratio of reinforcement could reduce the influence of seismic wave on the utility tunnel structure, which was beneficial to the structure earthquake resistance. The clay field containing the interlayer of liquefied sandy soil has a certain damping effect on the structure of the utility tunnel, and the displacement response could be reduced by 14.1%. Under the excitation of strong earthquake, the reinforcement strain at the side wall upper end and haunches of the utility tunnel was the biggest, which is the key part of the structure. The experimental results were in good agreement with the fitting results, and the results could provide a reference value for the anti-seismic design and application of composite precast fabricated utility tunnel.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.563-564
• /
• 2007

In recent years, equipment and network standards have been increasing in both number and complexity. Two standards that will soon be introduced to KOREA are the HV standards for assessing distorting and fluctuating loads, IEC 61000-3-6. Utility engineers, being under increasing time constraints, are turning more and more to software to quickly solve problems. This paper describes the methodology used to implement the above standards in Microsoft Excel in order to assist utility engineers to readily apply these standards in practical situations.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.17 no.5
• /
• pp.51-59
• /
• 2003

The utility and many customers employ capacitor banks(STATCON so called at the utility) to help control the power factor(customers) or voltage(the utility) by supplying reactive power to inductive loads. This paper presents analysis of transient overvoltages and harmonics due to utility STATCON switching. One simple and inexpensive means of limiting the voltage magnification transient and reducing harmonics is to switch the capacitor banks on a few minutes after the STATCON has been switched. Simulation results used the EDSA software package show the effects of decreased the transient voltage and harmonic reduction at the customer. And also harmonic limits based on the well-known international harmonic standards IEEE 519 and IEC 1000 are evaluated for the customer.

• The Journal of the Convergence on Culture Technology
• /
• v.7 no.3
• /
• pp.481-486
• /
• 2021

Machine learning algorithms adopt criterion function as a key component to measure the quality of their model derived from data. Cluster analysis also uses this function to rate the clustering result. All the criterion functions have in general certain types of favoritism in producing high quality clusters. These clusters are then described by attributes and their values. Category utility and partition utility play an important role in cluster analysis. These are fully analyzed in this research particularly in terms of how they are related to the favoritism in the final results. In this research, several data sets are selected and analyzed to show how different results are induced from these criterion functions.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.10
• /
• pp.134-140
• /
• 2007

In recent years, power equipment and system standards have been increasing in both number and complexity. The standards that will soon be introduced to KOREA is the transmission system standards for harmonic emission limits assessing in distorting loads. Utility engineers, being under increasing time constraints, are turning more and more to software to quickly solve problems. This paper describes the methodology used to implement the above standards in Microsoft Excel in order to assist utility engineers to readily apply these standards in practical situations.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.10
• /
• pp.1368-1375
• /
• 2013

The Smart Grid, which can monitor or diagnose the power grid in real time to operate efficiently, has been pushed ahead systematically as one of alternatives to solve these issues by combining the advanced Information Communication Technology and the electrical network. Hence, the electric company which introduces smart grid technology can read remotely the electrical meter readings by means of two-way communication between the meter and the central system. This enabled the customer and the utility to take part in reasonable electrical energy utilization. AMI became one of the core foundations in realizing the Smart Grid. It is hard to test the entire process of AMI system before the full deployment because it covers the broad objects from the customer to the utility operation system and requires mass data handling and management. Therefore, we design an efficient AMI network model and a simulator for performance evaluation required to simulate the network model similar to the real environment. This tool supports to evaluate the efficiency of the AMI network equipments and deployment. Additionally, it estimates the appropriate number of deployments and the proper capabilities.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.22 no.52
• /
• pp.261-273
• /
• 1999

It is booming to use computer and information owing to the information society. Therefore, software demand is increasing rapidly. Enhancing utility value depends upon software quality. Software quality measurement and evaluation are necessary to satisfy the users who are using computers. In the present time, ISO/IEC 9126 define 6 quality characteristics and 21 sub-characteristics including 40 inter quality characteristics. We developed software evaluation technique using the check list in accordance with the ISO/IEC 9126 in analysis phase. We evaluated the software quality in order to verify developing technique at S college. As a result of the evaluation, this college has found it necessary to maintain the software as soon as possible because academic systems are not adequate for users at this present time.

• 한국경영정보학회:학술대회논문집
• /
• 2007.11a
• /
• pp.487-492
• /
• 2007

This research focuses on the development and empirical validation of a model of software piracy behavior on the basis of deterrence theory, expected utility theory and the theory of reasoned action. The total of sample numbered 86 and PLS (Partial Least Square) was utilized for analysis. The test of this study revealed that punishment severity was the greatest significant factor to influence to software piracy and subjective norms was also significantly related to it. However punishment certainty and software cost do not significantly affect to software piracy.

• Korean Journal of Remote Sensing
• /
• v.5 no.1
• /
• pp.29-39
• /
• 1989

A study to develop generalized and systematically designed satellite image processing software system on mainframe computer was successfully carried out. Commercially available softwares such as LARSYS were analyzed and modified, and well known satellite data processing algorithms were implemented into comprehensive software. New algorithms were also presented and developed. The contents of developed softwere system may be divided into 8 major sections: menu and user interface, data file management, preprocessing, enhancement in monochrome image, multi-dimension image analysis, scene classification, image display/hardcopy, image handle utility software. Some additional software such as GIS and DBMS will make this software more comprehensive and generalized one for the satellite data processing.

• Journal of the Korean Solar Energy Society
• /
• v.26 no.1
• /
• pp.91-98
• /
• 2006

Islanding phenomenon of utility-connected photovoltaic power conditioning systems(PV PCS) can cause a variety of problems and must be prevented. If the real and reactive power supplied by PV PCS are closely matched to those of load, islanding detection by passive methods becomes difficult. The active frequency drift(AFD) method, called the frequency bias method, enables islanding detection by forcing the frequency of the voltage in the islanding to drift up or down. In this paper, non-detection zone(NDZ) of AFD is analyzed for the islanding detection method of utility-connected PV PCS by the simulation software tool PSIM.