• Maritime Security
• /
• v.1 no.1
• /
• pp.273-310
• /
• 2020

This study aims at empirically analyzing the overall mechanism of the "Gray Zone Strategy", which has begun to be used as one of Chinese major maritime security strategies in maritime conflicts surrounding the South China Sea and East China Sea since early 2010, and comparing the resulting conflict patterns in those reg ions. To this end, I made the following two hypotheses about Chinese gray zone strategy. The hypotheses that I have argued in this study are the first, "The marine gray zone strategy used by China shows different structures of implementation in the South China Sea and the East China Sea, which are major conflict areas.", the second, "Therefore, the patterns of disputes in the South China Sea and the East China Sea also show a difference." In order to examine this, I will classify Chinese gray zone strategy mechanisms multi-dimensionally in large order, 1) conflict trends and frequency of strategy execution, 2) types and strengths of strategy, 3) actors of strategy execution, and 4) response methods of counterparts. So, I tried to collect data related to this based on quantitative modeling to test these. After that, about 10 years of data pertaining to this topic were processed, and a research model was designed with a new categorization and operational definition of gray zone strategies. Based on this, I was able to successfully test all the hypotheses by successfully comparing the comprehensive mechanisms of the gray zone strategy used by China and the conflict patterns between the South China Sea and the East China Sea. In the conclusion, the verified results were rementioned with emphasizing the need to overcome the security vulnerabilities in East Asia that could be caused by China's marine gray zone strategy. This study, which has never been attempted so far, is of great significance in that it clarified the intrinsic structure in which China's gray zone strategy was implemented using empirical case studies, and the correlation between this and maritime conflict patterns was investigated.

• Korean Journal of Heritage: History & Science
• /
• v.53 no.4
• /
• pp.100-117
• /
• 2020

National Treasure no. 101, the stupa of State Preceptor Jigwang from the Beopcheonsa Temple Site in Wonju has been transferred from place to place and reassembled several times since it was built. In particular, overall dismantling and repair was carried out in 1957 to restore parts damaged by bombing during the Korean War. Documented information on the repair process and materials used at that time does not exist. However, various types of metal materials used for this stupa have been identified during conservation work. Besides clamps anchor bolts, 9mm-thick circular rebars were mainly used for joining the parts of this stupa, while circular rebars and wires of various thicknesses were used for joining the parts with mortar restoration materials. Although deformed bars are typically used for stone pagodas classified as architectural structures, smooth circular rebars were used in this case. In terms of restoration using mortar, material shapes were transformed, bound alternately, and twisted irregularly to improve bonding strength and coherence in order to insert restoration materials and to bolster structural weaknesses. In addition, metallographic analysis showed the material to be hypo-eutectoid steel with low carbon content. Many non-metallic inclusions in the shape of drops of different sizes were included, which do not affect the whole elemental composition due to the very small quantities involved. Qualitative and EPMA analysis of Mn and S, which were not identified by SEM-EDS area analysis, established an even distribution of MnS in crystal grains of the microstructure, regardless of the shape of the samples. It is presumed that secondary homogenization and softening might have been conducted after manufacturing to facilitate the working process. Furthermore, in consideration of properties indicating that the thinner the steel is, the less carbon content contained and the greater the elasticity and elongation, it is judged that restoration work was ordered.

• Journal of Mushroom
• /
• v.18 no.4
• /
• pp.357-364
• /
• 2020

The grade and price of Lentinula edodes largely differs in preference depending on the product area and seasonal factors. The product amount of autumn L. edodes was higher than that of spring L. edodes, but high quality, which is divided into "Hwago" is low in preference. Mostly, the autumn L. edodes is obtained as powder; hence, it is necessary to develop a processing method to utilize its flavor and aroma at an affordable price. Additionally, we estimated the content of 𝛽-glucan, ergosterol, vitamin D₂, reducing sugars, and free amino acids and evaluated the anti-inflammatory activity of saccharification powder of log-cultivated L. edodes. In the saccharification powders obtained via 7 min of UV irradiation of log-cultivated L. edodes, 𝛽-glucan and vitamin D₂ contents were found to be the highest, whereas ergosterol content was found to be the lowest. The content of reducing sugars ranged from 62.4 mg/L to 68.2 mg/L. The free amino acids were higher in these saccharification powders than in the control. Subsequently, RAW 264.7 cells were treated with different concentrations (10, 50, 100, 200, 300, and 500 ㎍/mL) of the saccharification powders of log-cultivated L. edodes obtained via different UV irradiation time applications. The cells showed good viability; the anti-inflammatory effect was found to be the highest at 7 min UV irradiation. Therefore, 7 min of UV irradiation was determined to be the optimum condition for manufacturing saccharification powders of log-cultivated L. edodes. Hence, saccharification powders of log-cultivated L. edodes may be used as a raw material for natural sweeteners, food additives, and in the food industry.

• Journal of the Korean earth science society
• /
• v.41 no.6
• /
• pp.617-629
• /
• 2020

Sea surface temperature (SST), which plays an important role in climate change and global environmental change, can be divided into skin sea surface temperature (SSST) observed by satellite infrared sensors and the bulk temperature of sea water (BSST) measured by instruments. As sea surface temperature products distributed by many overseas institutions represent temperatures at different depths, it is essential to understand the relationship between the SSST and the BSST. In this study, we constructed an observation system of infrared radiometer onboard a marine research vessel for the first time in Korea to measure the SSST. The calibration coefficients were prepared by performing the calibration procedure of the radiometer device in the laboratory prior to the shipborne observation. A series of processes were applied to calculate the temperature of the layer of radiance emitted from the sea surface as well as that from the sky. The differences in skin-bulk temperatures were investigated quantitatively and the characteristics of the vertical structure of temperatures in the upper ocean were understood through comparison with Himawari-8 geostationary satellite SSTs. Comparison of the skin-bulk temperature differences illustrated overall differences of about 0.76℃ at Jangmok port in the southern coast and the offshore region of the eastern coast of the Korean Peninsula from 21 April to May 6, 2020. In addition, the root-mean-square error of the skin-bulk temperature differences showed daily variation from 0.6℃ to 0.9℃, with the largest difference of 0.83-0.89℃ at 1-3 KST during the daytime and the smallest difference of 0.59℃ at 15 KST. The bias also revealed clear diurnal variation at a range of 0.47-0.75℃. The difference between the observed skin sea surface temperature and the satellite sea surface temperature showed a mean square error of approximately 0.74℃ and a bias of 0.37℃. The analysis of this study confirmed the difference in the skin-bulk temperatures according to the observation depth. This suggests that further ocean shipborne infrared radiometer observations should be carried out continuously in the offshore regions to understand diurnal variation as well as seasonal variations of the skin-bulk SSTs and their relations to potential causes.

• The Journal of Korean Society for Radiation Therapy
• /
• v.32
• /
• pp.85-92
• /
• 2020

Purpose: To find out the advantages of thermoplastic bolus compared to conventional bolus, which is mainly used in clinical practice, We evaluated Two cases in terms of dose and location reproducibility to assess Usability of thermoplastic Bolus for skin VMAT radiotherapy. Materials and Methods: Two patient's treated with left breast skin lesion were simulated using thermoplastic Bolus and planned with 2arc VMAT. the prescription dose was irradiated to 95% or more of the target volume. We evaluated The reproducibility of the bolus position by measuring the length of the air gap in the CBCT (Cone Beam CT) image. to evaluate dose reproducibility, we compared The dose distribution in the plan and CBCT and measured in vivo for patient 2. Results: The difference between the air gap in patient 1's simulation CT and the mean air gap (M1) during 10 treatments in the CBCT image was -0.42±1.24mm. In patient 2, the difference between the average air gap between the skin and the bolus (M2) during 14 treatments was -1.08±1.3mm, and the air gap between the bolus (M3) was 0.49±1.16. The difference in the dose distribution between Plan CT and CBCT was -1.38% for PTV1 D95 and 0.39% for SKIN (max) in patient 1. In patient 2, PTV1 D95 showed a difference of 0.63% and SKIN (max) -0.53%. The in vivo measurement showed a difference of -1.47% from the planned dose. Conclusion: thermoplastic Bolus is simpler and takes less time to manufacture compared to those produced by 3D printer. Also compared to conventional bolus, it has high reproducibility in the set-up side and stable results in terms of dose delivery.

• Microbiology and Biotechnology Letters
• /
• v.48 no.4
• /
• pp.525-532
• /
• 2020

A continuous fermentation process was carried out to enhance hyaluronic acid (HA) production using Streptococcus zooepidemicus cells. During the 1st stage continuous operation from 8 h with a dilution rate of 0.029/h (D1), HA was produced in the range of 7.5-10 g/l. During the 2nd stage from 44 h with a dilution rate of 0.036/h (D2), HA production (8.28 g/l) was initially reduced to a small extent due to increase of dilution rate from D1 to D2, and then a new pseudo-steady state was formed within a few hours with a concurrent small variations of HA production. The HA amount produced during the latter part of the 2nd stage was stably maintained in the range of 8.28-9.48 g/l, about 4.7% less amount compared to the 1st stage. Due to 24% increase of dilution rate from D1 to D2, however, maximum volumetric productivity (DP) amounting to 0.341 g/l/h was obtained at 96 h during the 2nd stage. This maximum productivity obtained from the continuous culture turned out only a small increase (3%) as compared to the corresponding batch fermentation. However, it should be noted that, in the case of batch process, one run typically consists of serial stages of growth culture plus one final production culture. This implies that, if the continuous fermentation that practically needs no dead time necessary for the multi-stage growth cultures is run for longer period, the total amount of the accumulated HA would be far greater than the amount obtained from the corresponding batch culture performed for the identical period.

• Ecology and Resilient Infrastructure
• /
• v.8 no.1
• /
• pp.32-43
• /
• 2021

Multichannel automated chamber systems (MCACs) were developed for the continuous monitoring of soil CO2 efflux in forest ecosystems. The MCACs mainly consisted of four modules: eight soil chambers with lids that automatically open and close, an infrared CO2 analyzer equipped with eight multichannel gas samplers, an electronic controller with time-relay circuits, and a programmable logic datalogger. To examine the stability and reliability of the developed MCACs in the field during all seasons with a high temporal resolution, as well as the effects of temperature and soil water content on soil CO2 efflux rates, we continuously measured the soil CO2 efflux rates and micrometeorological factors at the Nam-san experimental site in a Quercus mongolica forest floor using the MCACs from January to December 2010. The diurnal and seasonal variations in soil CO2 efflux rates markedly followed the patterns of changes in temperature factors. During the entire experimental period, the soil CO2 efflux rates were strongly correlated with the temperature at a soil depth of 5 cm (r2 = 0.92) but were weakly correlated with the soil water content (r2 = 0.27). The annual sensitivity of soil CO2 efflux to temperature (Q10) in this forest ranged from 2.23 to 3.0, which was in agreement with other studies on temperate deciduous forests. The annual mean soil CO2 efflux measured by the MCACs was approximately 11.1 g CO2 m-2 day-1. These results indicate that the MCACs can be used for the continuous long-term measurements of soil CO2 efflux in the field and for simultaneously determining the impacts of micrometeorological factors.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.26 no.3
• /
• pp.263-276
• /
• 2021

Marine benthic organisms have been used as the indicators for the environment assessment and recently considered as a very important component in the biodiversity and ecosystem restoration. In Korean waters, the quantitative data on marine benthos was used as one of major components for the marine pollution assessment for 50 years since 1970s. The species identification which is an important factor for the quantitative biological data was mainly performed by the marine benthic ecologists. This leads to the deterioration of the data quality on marine benthos from the misidentication of major taxonomic groups due to the lack of taxonomic expertise in Korea. This taxonomic problem has not been solved until now and remains in most data from national research projects on the marine ecosystems in Korean waters. Here we introduce the quality assurance and control (QA/QC) system for the marine biological data in UK, that is, NMBAQC (Northeast Atlantic Marine Biological Analytic and Quality Control) Scheme which has been performed by private companies to solve similar species identification problems in UK. This scheme asks for all marine laboratories which want to participate to any national monitoring programs in UK to keep their identification potency at high level by the internal quality assurance systems and provides a series of taxonomic workshops and literature to increase their capability. They also performs the external quality control for the marine laboratories by performing the Ring Test using standard specimens on various faunal groups. In the case of Korea, there are few taxonomic expertise in two existing national institutions and so they can't solve the taxonomic problems in marine benthic fauna data. We would like to provide a few necessary suggestions to solve the taxonomic problems in Korean marine biological data in short-terms and long-terms: (1) the identification of all dominant species in marine biological data should be confirmed by taxonomic expertise, (2) all the national research programs should include taxonomic experts, and (3) establishing a private company, like the Korea marine organism identification association (KMOIA), which can perform the QA/QC system on the marine organisms and support all Korean marine laboratories by providing taxonomic literature and species identification workshops to enhance their potency. The last suggestion needs more efforts and time for the establishment of that taxonomic company by gathering the detailed contents and related opinions from diverse stakeholders in Korea.

• Korean Chemical Engineering Research
• /
• v.60 no.1
• /
• pp.93-99
• /
• 2022

With the rapid development of ultra-small and wearable device technology, continuous electricity supply without spatiotemporal limitations for driving electronic devices is required. Accordingly, Triboelectric nanogenerator (TENG), which utilizes static electricity generated by the contact and separation of two different materials, is being used as a means of effectively harvesting various types of energy dispersed without complex processes and designs due to its simple principle. However, to apply the TENG to real life, it is necessary to increase the electrical output. In addition, stable generation of electrical output, as well as increase in electrical output, is a task to be solved for the commercialization of TENG. In this study, we proposed a method to not only improve the output of TENG but also to stably represent the improved output. This was solved by using the contact layer, which is one of the components of TENG, as an electret for improved output and stability. The utilized electret was manufactured by sequentially performing corona charging-thermal annealing-corona charging on the Fluorinated ethylene propylene (FEP) film. Electric charges artificially injected due to corona charging enter a deep trap through the thermal annealing, so an electret that minimizes charge escape was fabricated and used in TENG. The output performance of the manufactured electret was verified by measuring the voltage output of the TENG in vertical contact separation mode, and the electret treated to the corona charging showed an output voltage 12 times higher than that of the pristine FEP film. The time and humidity stability of the electret was confirmed by measuring the output voltage of the TENG after exposing the electret to a general external environment and extreme humidity environment. In addition, it was shown that it can be applied to real-life by operating the LED by applying an electret to the clap-TENG with the motif of clap.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.1
• /
• pp.167-174
• /
• 2022

Since the Promotion Committee was established on March 25, 2021, urging the enactment of the Detective Business Act, many opinions and attention from all walks of life have been gathered. The Detective Business system, which is also one of the presidential pledges of the current 19th President Moon Jae In, is expected to be significant in that it can promote the development of a welfare state as well as efficient parts such as meeting the demand for security reinforcement services, improving the judicial system, and enhancing internationalization. In accordance with the consensus of the nine judges of the Constitutional Court that the lower part of Article 40 of the "Act on the Use and Protection of Credit Information" which prohibits the use of similar names such as investigating the general life of certain people does not violate the Constitution, detective work became possible regardless of the general life investigation. In particular, the detective job officially appeared on August 5, 2020, and it will be able to provide effective work services to the public by competing with prosecutors, police, and lawyers who have occupied exclusive positions in the field of a criminal investigations. However, although the role of detectives is gradually expanding and society is rapidly changing, illegal activities are prevalent throughout society, and more than 1,600 companies are currently operating suspiciously using the only name of "detectives", but the police are virtually letting go of the situation saying that they are "unauthorized.", and the damage is only going to the people, so at this point, the most worrisome thing is the absence of the law. Meanwhile, amid concerns over institutions overseeing illegal activities caused by the emergence of the detective industry, private security and detectives are similar to each other as in the United States, and it is expected to be able to gain public trust by entrusting the police in charge of managing and supervising private security companies. Therefore, at this time when most OECD countries except Korea legislate the Detective Business Act, prematurely allowing only the detective industry without enacting industry-related laws and systems can further fuel social confusion and hinder the detective industry along with the new fourth industry.