• 한국지역사회생활과학회지
• /
• 제12권2호
• /
• pp.105-117
• /
• 2001

The purpose of this study is to figure out the actual situation of possession and use of traditional living appliances in the rural area, so as to provide plans for preservation and succession of traditional living appliances. The data were collected from 200 households in 8 rural areas classified by geographical zone. Traditional living appliances were divided into clothing.food.housing living appliances, play tools, and the others. As a result, the degree of using the traditional living appliances is 46.5%(in respect of "often use"). The need for preserving and using the traditional living appliances in modern society was 68.5%(in respect of "a little need"). The level of preservation and use of the traditional living appliances was relatively low except for food living appliances. In conclusion, the suggested directions for developing traditional goods to preserve and succeed traditional living appliances are as follows; ${\circled1}$ Developing traditional living goods peculiar to a certain locality ${\circled2}$ Developing goods with various uses; display, ornament, living appliances, memorial, etc. ${\circled3}$ Developing goods on the process and technique of making traditional living appliances. ${\circled4}$ Providing information and education on excellance of traditional living appliances.

• 한국수소및신에너지학회논문집
• /
• 제31권5호
• /
• pp.411-418
• /
• 2020

A reformer is a device for producing hydrogen used in fuel cells. Among them, methanol steam reformer uses methanol as fuel, which is present as a liquid at room temperature. It has the advantage of low operating temperature, high energy density, and high hydrogen production. The purpose of this study is to improve the internal flow of the pressure vessel when a bundle of methanol steam reformer in the pressure vessel goes out to a single outlet. An analysis of equilibrium reaction to methanol steam reforming reaction was conducted using Aspen HYSYS^® (Aspen Technology Inc., Bedford, USA), and based on the results, computational analysis was conducted using ANSYS Fluent^® (ANSYS, Inc., Canonsburg, USA). For comparison of the results, the height of the pressure vessel, outlet diameter, and fillet was set as variables, and the optimum geometry was selected by comparing the effects of gravity and the amount of negative pressure.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제1권1호
• /
• pp.8-16
• /
• 2012

Fixed speed wind turbine generators system that uses induction generator as a wind generator has the stability problem similar to a synchronous generator. On the other hand, doubly fed induction generator (DFIG) has the flexibility to control its real and reactive powers independently while being operated in variable speed mode. This paper focuses on a scheme where IG is stabilized by using DFIG during grid fault. In that case, DFIG will be heavily stressed and a remedy should be found out to protect the frequency converter as well as to allow the independent control of real and reactive powers without loosing the synchronism. For that purpose, a crowbar protection switch or DC-link protecting device can be considered. This paper presents a comparative study between two protective schemes, a crowbar circuit connected across the rotor of the DFIG and a protective device connected in the DC-link circuit of the frequency converter. Simulation analysis by using PSCAD/EMTDC shows that both schemes could effectively protect the DFIG, but the latter scheme is superior to the former, because of less circuitry involved.

• 한국농공학회지
• /
• 제41권3호
• /
• pp.81-90
• /
• 1999

The purpose of this study is to examine the uses of fly ash asa type of construction material. This paper presents the results of research performed to identify optimum mix proportions for production of lowable fill with high volume fly ash content . The fly ash used in this study met the requirements of KS L 5405 and ASTM C 618 for Class F material. The flowable fill with high volume fly ash content was investigated for strength and flowability characteristics. Tests were carried out on flowable fill designed to have 10 ~15kgf/$\textrm{cm}^2$ compressive strength at 28 days with fly ash contents of approximately 260kgf/㎥. Slump was held at 25$\pm$1cm for all mixtures produced to range from 5kgf/$\textrm{cm}^2$ to 14kgf/$\textrm{cm}^2$ compressive strengths at 28 days. To produce flowable fill with high volume fly ash , first the influential variables were identified in an experimental study based on factorial design. Among the proportioning variables investigated, cement ,fly ash, and sand contents were found to have statistically significant effect on strength and slump of flowable fill . Subsequently, response surface analysis techniques were used to devise an experimental program that helped determine the optimum combinations of the selected influential variables based on material properties and cost. The optimized flowable fill were then technically evaluated. It is shown that flowable fill has acceptable compressive strength , slump flow, hardening time, and permeability.

• 동의생리병리학회지
• /
• 제29권1호
• /
• pp.66-71
• /
• 2015

The purpose of the study is to establish priorities in integrated medicine policy. Delphi method was used in conducting a survey on integrated medicine specialists regarding the policies of integrated medicine and actions. For specialists in integrated medicine, total 17 persons selected included scholars who performed minimum one study on integrated medicine, medical staff who performing integrated medical service at institutions that implemented integrated medical care or those who were involved in creating or implementing policies on integrated medicine. The first Delphi-method survey conducted from Apr. 14 through 18, while the second survey was carried out from Apr. 21 through 25. To prioritize the policies based on the results of the mini Delphi-method survey, Analytic Hierarchy Process(AHP) was performed for 15 persons answered to mini Delphi-method from May 2 through 16, 2014. From the Delphi-method survey, four policies and 16 actions were obtained. AHP showed the first priority placed on 'Building the Infrastructure of Industrialization in the Integrative medicine' of the 4 policies and 'Developing new diagnostic and treatment instruments' was given the highest priority of the 16 actions. For implementation of integrated medicine policy, the 4 policies and the 16 actions found in this research require government support and should be urgently implemented according to its priority.

• 한국산업융합학회 논문집
• /
• 제25권5호
• /
• pp.861-868
• /
• 2022

The purpose of this study is to design an effective atmospheric environment system through the design of the dust collection in the air shot room being operated in a domestic shipyard. The ventilation system in the current air shot room mostly uses a dust collecting filter to filter internal particles and releases them in the atmosphere. A conventional design was made too much. In order to prevent an error and draw an optimal design, Computational fluid dynamics (CFD) tried to be applied only to air shot room. In the advanced design technique, computer simulation was conducted to secure basic design data. In order to find the basic design of the ventilation system and the flow field in the air shot room at propeller mold workplace of a shipyard, the CFD was conducted. In the case of Model-1 as a conventional workplace, where air flows in the inlet due to the subatmospheric pressure generated by inhalation of an air blower and flows out to the outlet, a discharge flow rate was somewhat low, and there was the holdup zone in the room. In the case of Model-2 as an improved model, the ventilation system was improved in the Push-Pull type, and the holdup of the internal flow field was improved.

• International Journal of Aeronautical and Space Sciences
• /
• 제17권3호
• /
• pp.332-340
• /
• 2016

A design optimization is performed for the double-bolted joint in cylindrical composite structures by using a simplified analytical method. This method uses failure criteria for the major failure modes of the bolted composite joint. For the double-bolted joint with a zigzag arrangement, it is necessary to consider an interaction effect between the bolt arrays. This paper proposes another failure mode which is determined by angle and distance between two bolts in different arrays and define a failure criterion for the failure mode. The optimal design for the double-bolted joint is carried out by considering the interactive net-tension failure mode. The genetic algorithm (GA) is adopted to determine the optimized parameters; bolt spacing, edge distance, and stacking sequence of the composite laminate. A purpose of the design optimization is to maximize the burst pressure of the cylindrical structures by ensuring structural integrity. Also, a progressive failure analysis (PFA) is performed to verify the results of the optimal design for the double-bolted joint. In PFA, Hashin 3D failure criterion is used to determine the ply that would fail. A stiffness reduction model is then used to reduce the stiffness of the failed ply for the corresponding failure mode.

• 한국간호교육학회지
• /
• 제15권1호
• /
• pp.120-127
• /
• 2009

Purpose: In the literature power analysis in experimental studies is often executed and reported falsely. This descriptive study was done to promote the correct application of the Cohen(1988)'s power analysis method. Method: Articles of experimental studies from a nursing journal were selected and reviewed to examine the uses of and the reports on the power analysis process. Also, the appropriate power analysis process was discussed with an example of the most common experimental design, an independent two-group design with t test analysis plan. Result: Around half the experimental studies examined reported that they carried out power analysis. Cohen's method was the most frequently utilized but with accuracy in question. Conclusion: Power analysis to estimate sample size is the interplay between alpha, power, and effect size, and other factors in the case of t test analysis. Researchers should have a clear understanding of how to apply the Cohen's power analysis method so they do not produce poorly estimated sample sizes.

• Asian Pacific Journal of Cancer Prevention
• /
• 제15권20호
• /
• pp.8571-8576
• /
• 2014

Phytomedicines are believed to have benefits over conventional drugs and are regaining interest in current research. Moringa oleifera is a multi-purpose herbal plant used as human food and an alternative for medicinal purposes worldwide. It has been identified by researchers as a plant with numerous health benefits including nutritional and medicinal advantages. Moringa oleifera contains essential amino acids, carotenoids in leaves, and components with nutraceutical properties, supporting the idea of using this plant as a nutritional supplement or constituent in food preparation. Some nutritional evaluation has been carried out in leaves and stems. An important factor that accounts for the medicinal uses of Moringa oleifera is its very wide range of vital antioxidants, antibiotics and nutrients including vitamins and minerals. Almost all parts from Moringa can be used ad a source for nutrition with other useful values. This mini-review elaborates on details of its health benefits.

• KIEAE Journal
• /
• 제12권4호
• /
• pp.3-12
• /
• 2012

Nowadays, interests on Eco-city planning as Solution for problems of energy demand and environmental change has grown. so Eco-city planning became a major political topic for urban planning and urban design in many advanced nation cities. The purpose of this study is to find out the organized characteristics of Eco-City planning by analyzing successful overseas case where wasted historic port area in city is are regenerated with a environment-friendly concept for Eco-City "HafenCity". It is located on Hamburg-mitte in Hamburg, Germany and is currently the largest construction project in Europe. HafenCity as Home to about 12,000 and the workplace of 40,000 people is being created to accommodate a variety of uses including residential buildings, business, office and retail space as well as cultural and leisure facilities. First of all, HafenCity impresses because of its size as well as because of its Urban planning for eco-city. It presents the excellent change from wasted historic port to the ecological urban space.