• Journal of IKEEE
• /
• v.23 no.2
• /
• pp.727-734
• /
• 2019

This paper confirms whether the movement or specific operation of the muscles in the process of transferring a person from the brain can find a signal showing an essential feature of a certain part of the brain. As a rule, the occurrence of EEG(Electroencephalogram) changes when a signal is received from a specific action or from an induced action. These signals are very vague and difficult to distinguish from the naked eye. Therefore, it is necessary to define a signal for analysis before classification. The EEG form can be divided into the alpha, beta, delta, theta and gamma regions in the frequency ranges. The specific size of these signals does not reflect the exact behavior or intention, since the band or energy difference of the activated frequencies varies depending on the EEG measurement domain. However, if different actions are performed in a specific method, it is possible to classify the movement based on EEG activity and to determine the EEG tendency affecting the movement. Therefore, in this article, we first study the EEG expression pattern based on the activation of the left and right biceps EMG, and then we determine whether there is a significant difference between the EEG due to the activation of the left and right muscles through EEG. If we can find the EEG classification criteria in accordance with the EMG activation, it can help to understand the form of the transmitted signal in the process of transmitting signals from the brain to each muscle. In addition, we can use a lot of unknown EEG information through more complex types of brain signal generation in the future.

• Journal of Digital Convergence
• /
• v.17 no.9
• /
• pp.421-428
• /
• 2019

This study includes services that require six professional guides - health care, exhibition performance, restaurant, shopping, business and daily life - as well as a trip-based tour, along with solving existing problems that may occur on domestic and overseas trips, and proposes services that connect users with proven professional guides. As a result of previous research, the most needed services among overseas travel were air tickets, accommodation, transportation, and guides, but as Korea enters an aging society, professional guide services are expected to increase daily demand. Based on this, the service technology, user scenarios and brand development were presented. This Service Proposal provides users with a personalized guide to knowledge or experience that they have not previously known, providing them with a wealth of experience. In addition, guides can help develop new fields of expertise and help improve professional guides' capabilities. Finally, the platform service is meaningful in that it enables the creation of jobs by enabling everyone to engage in economic activities, as it allows users to provide services through their own capabilities while at the same time being convenient for them.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.5
• /
• pp.542-549
• /
• 2019

Maritime accidents, such as the collision of a fishing boat in Incheon's Yeongheung Island, result in several casualties and property damage, even if they occur just once. To prevent such accidents, the Incheon Metropolitan Government is implementing safety management policies; further, they will provide ship collision warning services to prevent collisions on WAVE (Wireless Access in Vehicular Environment) communication-based ship safety operation pilot projects. However, to realize these objectives, a service standardization method is required that defines specific service types, configurations, and systems, which should be prepared based on user requirement analyses. In this study, a standardization method of WAVE communication-based collision warning service was developed by analyzing the requirements of the vessel operators subject to the services and related authorities. This will help improve the quality of service, ensuring professionalism and reliability through continuous improvement and efforts for standardization, as well as data derived from demonstration projects. Therefore, it is expected to help prevent maritime accidents to a considerable extent.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.2
• /
• pp.237-243
• /
• 2019

Floating platforms made of PE (PolyEthylene) are often located in shallows of seas, rivers or lakes. They are widely used for marine pensions, marine pontoons, marine bridges, etc. These products are characterized by good flexibility, recyclability, chemical resistance and weatherability with corrosion resistance. Existing PE floating platforms have a simple structure in which one pipe is fastened to one bracket, but this has limited application, even if a user modifies the arrangement. Therefore, we developed a structure that allows buoyancy pipes of various sizes to be fastened to one bracket and verified the structural safety of the product using the finite element method. From the results of structural analysis for buoyancy pipes of different diameters, the maximum stress ratio was 0.78 compared with allowable criteria of 1.0, which represented sufficient safety for a model with 500 mm diameter pipes. Based on the results of this study, further research to evaluate the structural safety of various floating platforms can be carried out in the further; it will also be necessary to establish related evaluation criteria.

• The Journal of Society for e-Business Studies
• /
• v.24 no.3
• /
• pp.73-86
• /
• 2019

After the 4th industrial revolution, the healthcare industry is striving to find new business models through new technologies. Among them, blockchain technology is one of the technologies that have great interest in the healthcare industry. Most providers of personal health record systems have difficulty in securing marketability due to various problems. Therefore, they try to integrate blockchain technology to develop new systems and gain marketability. However, blockchain has limitations in solving the problems of the personal health record system. In this study, we have designed a personalized health data management framework that enables information subjects to acquire full ownership rights of individual's health data, based on distributed ledger technology. For the framework design, we refer to the structure of R3 Corda. It was designed with a different network structure than the existing blockchain systems so that the node can be operated on the personal user's mobile device. This allows information subjects to directly store and manage their own data and share data with authorized network members. Through the proposed system, the information utilization of the healthcare industry can be improved and the public health promotion and medical technology development can be realized.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.35 no.1
• /
• pp.27-36
• /
• 2019

Purpose: The aims of this study were to evaluate the dentist's awareness and the actual status of infection control of noncritical dental instruments. Materials and Methods: 40 dental clinics in Daejeon, South Chungcheong, North Chungcheong and North Jeolla provinces were surveyed. The questionnaire was delivered to the dentists belonging to those clinics, and the awareness and the practice of infection control were examined. The microbial contamination on the surface of five noncritical instruments (impression gun, light curing unit, 3-way syringe, shade guide, and dental floss dispenser) used by them was measured with an ATP luminometer. Correlation analysis between the awareness and the actual state of infection control was conducted. Results: Awareness and frequency of infection control was highest in the 3-way syringe. Surface disinfection using disinfectant was most frequent in all instruments. 3-way syringes and shade guides were less contaminated than impression guns, light curing units, and dental floss dispensers. Conclusion: 3-way syringes had a significant correlation between user awareness of infection control and surface contamination, and the higher awareness, the lower the contamination measurement was shown.

• The Korean Journal of Archival Studies
• /
• no.29
• /
• pp.129-173
• /
• 2011

Standards-curriculum based archival contents for education is the best effective teaching and learning units for historical thinking abilities. This paper purposes a developing procedures of an archival contents for education that is theoretical instructions of developing an archival contents for education by the National Archives of Korea. This paper can be used of the theoretical bases for the National Archives of Korea by proposing the methodology of development of an archival contents for education. The developing procedures of an archival contents for education is the same with the procedures of developing an e-learning contents that has planning, analyzing, designing, developing and assessing steps but it is characterized by an archival contents for education that is curriculum standards analysis, collection analysis, and detailed design for structured formats in effective-accomplishments for teaching-learning objectives. I propose the procedures for determining teaching-learning subjects that enable the development of an archival contents for education by curriculum standards analysis. I also propose the procedures for deriving the key words from the teaching-learning subjects. Collection analysis methods analyze key records that correspond to the learning subjects according to the selection criteria of primary sources. In the steps of designing, titles of contents and contents structures have to be determined and storyboards based on flowchart of learning have to be made of according to the results of analyses. In the steps of developing contents, making a copy of primary sources like a original is the key points. And also in the steps of assessment, products of teaching-learning contents to effectively achieve the teaching-learning objectives have to be estimated by the appraisal board. Finally I propose that user's survey research after the services have to be reflected on contents updates and new developments of contents.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.35 no.1
• /
• pp.11-19
• /
• 2019

Purpose: This study evaluated the usability of and satisfaction with two types of computer-aided design (CAD) software among users who had experience with dental implant CAD software and those who did not. Materials and Methods: Dental technicians (n = 20) who had previous experience with dental implant CAD Software and students from the College of Dentistry (n = 12) who had never designed implant custom abutments were asked to evaluate two types of CAD Software, Exocad and Deltanine. In addition, the participants were asked to fill out a structured questionnaire (Section 1: Entering basic information and retrieving files; Section 2: Setting conditions before abutment design; Section 3: Setting abutment design; and Section 4: Overall satisfaction). For the statistical analysis of the collected data, Mann-Whitney U test was used (${\alpha}=.05$). Results: The ease of design and satisfaction with the implant CAD Software, evaluated with respect to 21 statements divided into four Stages, were significantly higher for Exocad in both groups for Secion 1. For Sections 2 and 3, participants with experience evaluated Deltanine to be significantly better. For Section 4, both groups evaluated Exocad Software to be better. Conclusion: Overall, the Exocad Software was evaluated as having better usability and offering greater satisfaction. However, in terms of performance in the core of the design process, i.e. Sections 2 and 3, Deltanine was rated higher by the experienced users. Thus, if the user interface design parts are supplemented, Deltanine CAD Software could be put to a wider use in clinics.

• Journal of Digital Convergence
• /
• v.17 no.1
• /
• pp.209-217
• /
• 2019

In this paper, the purpose of this paper is to lay the foundation for the search system by using and building an online search engine suitable for the search domain and enabling search, conversion, integration and sharing of information. It is to use the ontology to infer hierarchical relationships, deduce objects based on that layer, and extract attributes to search areas that are relevant to the data that the user wants. In order to search for information in this way, the information search system was implemented by entering key words related to 'qualifications'. The implemented system arranged the meaning and relationship of each attribute online so that the general public can search information quickly, easily, and accurately. In addition, the implementation results were compared with two different search engines. Comparable search engines are Naver and Daum, the two major search engines. The search engine of this study, which was built using an ontology suitable for the search domain to perform searches using the semantic web, was evaluated to have excellent results. However, it is thought that a more formalized online location is necessary to increase the accuracy and reliability of search engines and to include more comprehensive categories of search terms.

• Journal of the Korea Computer Graphics Society
• /
• v.27 no.3
• /
• pp.31-42
• /
• 2021

We propose a deep learning-based method that can estimate an appropriate lighting of both indoor and outdoor images. The method consists of two networks: Crop-to-PanoLDR network and LDR-to-HDR network. The Crop-to-PanoLDR network predicts a low dynamic range (LDR) environment map from a single partially observed normal field of view image, and the LDR-to-HDR network transforms the predicted LDR image into a high dynamic range (HDR) environment map which includes the high intensity light information. The HDR environment map generated through this process is applied when rendering virtual objects in the given image. The direction of the estimated light along with ambient light illuminating the virtual object is examined to verify the effectiveness of the proposed method. For this, the results from our method are compared with those from the methods that consider either indoor images or outdoor images only. In addition, the effect of the loss function, which plays the role of classifying images into indoor or outdoor was tested and verified. Finally, a user test was conducted to compare the quality of the environment map created in this study with those created by existing research.