• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.4
• /
• pp.552-557
• /
• 2020

The Radar Cross Section (RCS) is a virtual region indicating the strength of a wavelength at which a radar signal is reflected and received. As the ship's RCS represents its own stealth performance and survivability, efforts have been made in various areas from design to construction to reduce the RCS. The RCS can be predicted using design drawings and CAD models, but it is necessary to measure the RCS at sea since sea clutter and multipath reflections occur in the sea environment. However, such RCS predictions and measured values provide only a simple relative magnitude to the user, and there has not been much research on this topic. In this paper, a missile countermeasure technique was studied using 3D RCS measurement data in an operating environment. The elevation and azimuth angle of the ship viewed from the missile were estimated using the location information of the missile, and the RCS value was inverted by mapping it to previously measured 3D RCS measurement data. In addition, by using the movement information of the missile, the RCS observed by the missile could be predicted in advance, and this method can be used to propose a response plan based on the maneuvering and chaff system.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.4
• /
• pp.582-587
• /
• 2020

Recently, disasters caused by extreme weather and the damage caused by them are increasing worldwide. The interest in disasters, such as earthquakes, typhoons, and ground subsidence, is increasing in Korea. Korea has enacted a special law based on disaster management, and has built monitoring systems for individual facility units by building precision sensors and related systems to measure the displacement status of long bridges and high-rise composite buildings. On the other hand, the application of a real-time monitoring system is insufficient for slopes, open-pit mines, small and medium structures due to weather, measurement methods, cost, and constant monitoring difficulties. In this study, the displacement monitoring method using the total station was studied and the applicability was suggested through the experiment. Through the research, the concept and operation flow of a monitoring system that can measure the displacement of the terrain or the structure using the total station was presented. The monitoring system allows the user to select the location and operation method of the equipment so that the equipment can be installed according to the site situation, and set the number of observations, the period, and the observation range of the object. Using the experiment on the monitoring system, the station was monitored with precision within 5mm, and it was suggested that the displacement of the object can be monitored using the total station. Further research will be needed to assess the applicability of monitoring to real slopes and structures.

• Journal of the Institute of Convergence Signal Processing
• /
• v.10 no.1
• /
• pp.40-48
• /
• 2009

Leading of the computer, IT technology has make great strides. As a information-industry-community was highly developed, user's needs to convenience about intelligence and humanization of interface is being increase today. Nowadays, researches with are related to BCI are progress put the application-technology development first in importance eliminating research about fountainhead technology with DB construction. These problems are due to a BCI-related research studies have not overcome the initial level, and not toward a systematic study. Brain wave are collected from subjects is a signal that the signal is appropriate and necessary in the experiment is difficult to distinguish. In addition, brain wave that it's not necessary to collect the experiment, serious eyes flicker, facial and body movements of an EMG and electrodes attached to the state, noise, vibration, etc. It is hard to collect accurate brain wave was caused by mixing disturbance wave in experiment on the environment. This movement, and the experiment of subject impact on the environment due to the mixing disturbance wave can cause that lowering cognitive and decline of efficiency when embodied BCI system. Therefore, in this paper, we propose an accurate and efficient brain-wave DB building system that more exactness and cognitive basis studies when embodied BCI system with brain-wave. For the minimize about brain wave DB with mixing disturbance, we propose a DB building method using an automatic control and prevent unnecessary action, put to use the subjects face tracking.

• The Journal of the Korea Contents Association
• /
• v.15 no.12
• /
• pp.106-120
• /
• 2015

Along with economic growth which affects to the overall increase in income level within society, more permissible leisure time, and change in values of the life style directly affected to the more demand of performance arts. The theaters where the performance contents are actually accomplished have been built with various objectives and now there are 232 of performing art theaters are in operation at various locations over the country. The purpose of this research is to identify behavioral factors regarding how the preferable choice were made from the various type of the performance arts, study for the correlation on post behavior customer based on the survey conducted at Sori Art Center. As a result of this research, there were strong correlation were identified between how the preferable choice were made among the various type of performance and Customer's intend of returning visit /perceivd value. In addition to the aforementioned result, the survey result shows that the excellence of the facility, hospitality level of the staffs, and additional customer services were the meaningful positive factors and user convenience/subsidiary facilities were negative factors to the overall service quality control activities. The research reveals meaningful correlations between quality of the customer service factors and how the preferable choice were made by customer that lead to strategic plan which will increase competitiveness of the Sori Art Center. Extensive research for the Sori Art Center which represents cultural power of the local community would be exemplary case not only for the art centers in metropolitan area but also other local areas within the country.

• Journal of Korean Society for Geospatial Information Science
• /
• v.23 no.4
• /
• pp.43-48
• /
• 2015

We studied on pseudo-range correction(PRC) modeling in order to improve differential GNSS(DGNSS) accuracy. The PRC is the range correction information that provides improved location accuracy using DGNSS technique. The digital correction signal is typically broadcast over ground-based transmitters. Sometimes the degradation of the positioning accuracy caused by the loss of PRC signals, radio interference, etc. To prevent the degradation, in this paper, we have designed a PRC model through polynomial curve fitting and evaluated this model. We compared two quantities, estimations of PRC using model parameters and observations from the reference station. In the case of GPS, the average is 0.1m and RMSE is 1.3m. Most of GPS satellites have a bias error of less than ${\pm}1.0m$ and a RMSE within 3.0m. In the case of GLONASS, the average and the RMSE are 0.2m and 2.6m, respectively. Most of satellites have less than ${\pm}2.0m$ for a bias error and less than 3.0m for RMSE. These results show that the estimated value calculated by the model can be used effectively to maintain the accuracy of the user's location. However;it is needed for further work relating to the big difference between the two values at low elevation.

• The Journal of the Korea Contents Association
• /
• v.11 no.11
• /
• pp.173-184
• /
• 2011

This study suggests the invigoration strategies of commercial and business functions for regeneration of old inner city as city center by examining Dangjin County which is a typical example of the local small-and-medium city where old inner city had declined as the city grew. I conducted a conjoint analysis in terms of important introduction functions and city regeneration directions for the invigoration. The results upon this are as follows. First, low-density of commercial and business places and the utilization of historical and cultural resources instead of the high-density mixed-use development should be considered. Second, It is important to promote regional specialized business and facilities rather than to attract new industry(high-tech industry) for activating local economy. Third, specific and practical countermeasures for resettlement of low-incomes and for maintenance of existing business zone should be established. Fourth, in terms of the maintenance and management, regulation on illegal commercial transactions, improvement of public spaces, and securement of user safety should be considered. Fifth, in terms of consolidation of functions, easier accessibility using public transportations, advertising and promotion of the city, and holding a number of events should be contemplated. Sixth, supporting for business activities and for establishing guides for design of old inner city should be needed. Seventh, public institutions should play a role as a bridge between local residences and experts for balanced regional development.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.12 no.3
• /
• pp.127-137
• /
• 1992

For the real-time control of a multi-purpose reservoir in case of a storm, it is absolutely necessary to forecast accurate flood inflows through a good rainfall-runoff model by calibrating the parameters with the on-line rainfall and water level data transmitted by the telemetering systems. To calibrate the parameters of a runoff model. the trial and error method of manual calibration has been adopted from the subjective view point of a model user. The object of this study is to develop a automatic calibration method using an optimization technique. The pattern-search algorithm was applied as an optimization technique because of the stability of the solution under various conditions. The object function was selected as the sum of the squares of differences between observed and fitted ordinates of the hydrograph. Two historical flood events were applied to verify the developed technique for the automatic calibration of the parameters of the storage-function rainfall-runoff model which has been used for the flood control of the Soyanggang multi-purpose reservoir by the Korea Water Resources Corporation. The developed method was verified to be much more suitable than the manual method in flood forecasting and real-time reservoir controlling because it saves calibration time and efforts in addition to the better flood forecasting capability.

• The Journal of the Korea Contents Association
• /
• v.15 no.6
• /
• pp.33-42
• /
• 2015

As smart phones have been increasingly used to access information with bigger screens and higher resolution, smart phones have rapidly grown larger. Even Apple which had stuck to the 4-inch smart phone screen size, released 5.5-inch iPhone 6 plus. In this trend of smart phone enlargement, manufacturers have mostly incorporated one-handed modes to 5-inch or larger phones to keep the convenience of one-handed operation. But most of them provide just smaller screens and are rather complicated to set up after several menus to touch. In this study, this research examined one-handed functions of each smart phone manufacturer to understand problems in the one-handed smart-phone manipulation of web-browsing which is one of the frequent smart phone services. And by investigating smart phone users, this research found out requirements for one-handed web search operation. Based on this examination, the author of this research designed an efficient one-handed interface for mobile web-search without reducing the screen size. Then, to assess the possible usability improvement, the prototype was applied to a large 5.5-inch-screen smart phone to evaluate its performance through observation and surveys and find out manipulation satisfaction and further improvements.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.6 no.2
• /
• pp.46-64
• /
• 2003

The vector shaped object is generally very long (hundreds or thousands of kilometers) and very narrow (10-100 meters). Image mapping techniques and tools for these objects should be totally different from the traditional area-based targets. Acknowledging these unique characteristics of the vector shaped object, a motion picture mapping system has been developed by combining internet GIS technology with airborne video. In particular, integration between airborne video and digital maps took advantage of each component, and enabled the landscape structure to be visualized, interacted with and deployed all on the Web. The motion picture maps provided a completely new means for disseminating information for area-wide landscape in a visual and interactive manner to the general public while digital map with location information revealed successfully the major parameters that influence an area-wide spatial structure in the study area. The remote video approach breaks down the usual concept of image mapping in a conventional cartography. As a result, the research findings have established the new concept of 'internet airborne video mapping for vector shaped object', proposed as an initial aim of this paper. It would playa crucial role in improving the quality of public information service if the mapping system is operationally introduced into the Government since the highly user-friendly moving picture provides a completely new means for disseminating spatia) information for vector shaped object.

• Archives of design research
• /
• v.14
• /
• pp.1-7
• /
• 1996

Designers often hesitate to decide the shape, size, and layout of a product. Though ergonomic principles and data are absolutely needed in this process, they don have enough guidelines to refer. For the refrigerator designers, they also are not convinced of their decision: the vertical position of the freezing and refrigerating rooms, the height of shelves, the shape of door-handle, etc. To support the refrigerator design, we applied several ergonomic methods to the evaluation of refrigerator. EMG was measured to evaluate the load of users lumbar muscle. Based upon the experimental EMG data, we developed a model to estimate the relative load corresponding to the height of refrigerator shelves. Two different layouts of a refrigerator, R/F and F/R styles, were compared with the model. A three-dimensional motion analysis method was used to evaluate the users motion of using a refrigerator. Ten door-handles with the different shapes and positions were evaluated by tracking the rotations of the users arm. Video protocol analysis was used to evaluate the user interface of a control panel in a refrigerator. Finally, we suggested several ergonomic design guidelines based on the facts found in this research and the anthropometric data of the Korean adults. The results of this study can be applied to the ergonomic design of refrigerators