• The KIPS Transactions:PartC
• /
• v.17C no.6
• /
• pp.459-464
• /
• 2010

Due to the application-specific nature of wireless sensor networks, the sensitivity to such a requirement as data reporting latency may vary depending on the type of applications, thus requiring application-specific algorithm and protocol design paradigms which help us to maximize energy conservation and thus the network lifetime. In this paper, we implement and evaluate a novel delay-adaptive sensor scheduling scheme for energy-saving data gathering which is based on a two phase clustering (TPC), in wireless sensor networks. The TPC is implemented on sensor Mote hardwares. With the help of TPC implemented, sensors selectively use direct links for control and forwarding time critical sensed data and relay links for data forwarding based on the user delay constraints given. Implementation study shows that TPC helps the sensors to increase a significant amount of energy while collecting sensed data from sensors in a real environment.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.6B
• /
• pp.508-516
• /
• 2006

The explosive growth of wireless network users and the existence of various wireless services have demanded high rate throughput as well as user's QoS guarantees. Towards this, this paper proposes QoS-oriented subcarrier allocation scheme considering the QoS provisioning of multiple users, which is major requirement for wireless network design point of view. This paper introduces joint RR/K&H combined with M-LWDF(Modified Largest Weighted Delay First) scheme throughout observing statistical channel behavior and real time queuing analysis for appropriate resource allocation tightly connected to multiuser scheduling. Accordingly, the system throughput can be enhanced, and the QoS demanded for delay sensitive services can be satisfied. Furthermore, the proposed scheme is applied for OFDMA(Orthogonal Frequency Division Multiple Access) systems to allocate sub-carriers in optimal way. The simulation results verify plausible performances of proposed resource allocation scheme via showing superior effective capacity under time-varying physical-layer channel behaviors.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.6
• /
• pp.9-17
• /
• 2014

Heterogeneous network (HetNet) is a network consisting of macrocells overlaid with small cells. In HetNet, the interference from macrocell to small cell users is a major cause of performance degradation of small cell users and enhanced inter-cell interference coordination (eICIC) is needed to mitigate the interference. Previous works on eICIC gives limited performance gain because these works focus on maximizing long-term throughput and rarely consider varying channel conditions over frames. This paper proposes a new algorithm which dynamically coordinates interference and schedules users on each frame to maximize the total utility of the network with lower computational complexity than exhaustive search. Simulation results show that the proposed algorithm achieves higher total throughput than the throughput with the conventional algorithm, and has higher fairness index than the conventional algorithm when there large number of users.

• Journal of KIISE:Information Networking
• /
• v.32 no.1
• /
• pp.68-79
• /
• 2005

The popularity of Web service is ever increasing. As the number of services and clients continue to increase, the problem of providing a system that scales with this increase is becoming more difficult. A costly and ineffective method is to buy a new system that is more powerful every time the load becomes unbearable. h more cost effective solution is to expand the system as the need arises. This is the approach taken in Web cluster systems. However, providing effective scalability in a Web cluster system is stil1 an open issue. In this study, we implement a Web cluster system based on Layer 7 switching technique on Linux. The implementation is based on a design proposed and implemented by Aron et al., but on the FreeBSD. Though the design li the same, due to the vast difference between the FreeBSD and Linux, the implementation presented in this paper is totally new. We also propose the Dual Scheduling (DS) load distribution algorithm that distributes the requests to the system resources by observing the variations in the request rate. We show through measurement on our implementation that the DS alorithm performs considerably bettor than previous algorithms.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.2
• /
• pp.94-103
• /
• 2003

In case of environment requiring safety such as human body and requiring flexible shape, a conventional mechanical actuator system does not satisfy requirements. Therefore, in order to solve these problems. a research of various smart material such as EAP (Electro Active Polymer), EAC (Electro Active Ceramic) and SMA (Shape Memory Alloy) is in progress. Recently, the highest preferring material among various smart material is EP (Electrostictive Polymer), because it has very fast response time, powerful force and large displacement. The previous researches have been studied properties of polymer and simple control, but present researches are studied a polymer actuator. An EP (Electostrictive Polymer) actuator has properties which change variably ils shape and environmental condition. Therefore, in order to coincide with a user's purpose, it is important not only to decide a shape of actuator and mechanical design but also to investigate a efficient controller. In this paper, we constructed the control logic with an adaptive fuzzy algorithm which depends on the physical properties of EP that has a dielectric constant depending on time. It caused for a sub-actuator to operate at the same time that a sub-actuator system operation increase with a functional improvement and control efficiency improvement in each actuator, hence it becomes very important to manage it effectively and to control the sub-system which Is operated effectively. There is a limitation on the management of Main-host system which has multiple sub-system, hence it brings out the Multi-Vehicle Control process that disperse the task efficiently. Controlling the multi-dispersion system efficiently, it needs the research of Main-host system's scheduling, data interchange between sub-actuators, data interchange between Main-host system and sub-actuator system, and data communication process. Therefore in this papers, we compared the fuzzy controller with the adaptive fuzzy controller. also, we applied the scheduling method for efficient multi-control in EP Actuator and the algorithm with interchanging data, protocol design.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.9A
• /
• pp.784-789
• /
• 2011

In this paper, a precoder based on limited phase feedback is proposed to maximize user's receive signal-to-interference-plus-noise ratio (SINR) in coordinated multi-point (CoMP) coordinated scheduling / coordinated beamforming (CS/CB) precoding matrix indicator (PMI) scenario. Most conventional precoding techniques based on limited phase feedback have been considered in a single-cell environment. However, considering neighboring cells in a multi-cell environment, we enhance the conventional preocoding. method. First, to maximize receive SINR, precoding matrices are designed to maximize the serving cell's signal and to minimize the coordinated cells' signal. Also, a precoder which can be used in a limited bit feedback condition is suggested. Finally, the proposed precoder's performance is evaluated and compared with some other precoding techniques by using simulation under the CoMP CS/CB PMI scenario.

• Journal of the Society of Naval Architects of Korea
• /
• v.45 no.4
• /
• pp.441-454
• /
• 2008

Shipyard design and equipments layout problem, which are directly linked with the productivity of ship production, is an important issue serving as reference data of production plan for later massive production of ships. So far in many cases, design of a shipyard has been relying on the experienced engineers in shipbuilding, resulting in sporadic and poorly organized processes. And thus, economic losses as well as trials and errors in that accord have been pointed out as inevitable problems. This paper extracts a checklist of major elements to fine tune the shipbuilding yard designing process and the input/output data based on the simulation based shipbuilding yard layout designing framework and methodology proposed in existing researches, and executed initial architecture to develop software that integrates all the relevant processes and designing tools. In this course, both user request and design data by the steps are arranged and organized in the proposed layout design template form. In addition, simulation is done based on the parent shipbuilding process planning and scheduling data of the ship product, shipbuilding process and work stage facilities that constitute shipbuilding yard, and design items are verified and optimized with the layout and equipment list showing optimal process planning and scheduling effects. All the contents of this paper are based on simulation based shipbuilding yard layout designing methodology, and initial architecture processes are based on object oriented development methodology and system engineering methods.

• The KIPS Transactions:PartD
• /
• v.8D no.5
• /
• pp.605-612
• /
• 2001

In order to solve the overload of academic affairs management system, we propose a method builds a distributed Replication server and uses this server with the present centralized system. Normal query transactions which are not required for data modification are composed of almost all DML sentences. So we construct the distributed replication servers according to the data characteristics and make them perform the query transaction without modification. In this way, we can simultaneously distribute users and data, and cut down processing time for every transaction. Also Replication server has the advantages of implemental efficiency and economical because it uses resources of present centralized system without and additional configurations. Usually, to distribute the overload of server, they can use way, Client-side overload distribution that user program get present overload status then can choose a less overloaded server, and the other way, Server-side overload distribution that make use of Application Layer Scheduling Technique and IP Layer Scheduling Technique. Our Replication server can reduce the overload of centralized system by eliminating or complementing those defects of overload distribution, referred to in the forehead.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37A no.12
• /
• pp.1093-1105
• /
• 2012

We propose an interference space reuse (ISR) algorithm for the MU-MIMO design in 3-cell downlink interference channels. Also, we provide a strategy for the adoption of the ISR scheme in the cellular network. In the multicell interference channels, the cell edge users may undergo severe interferences and their signals should be protected from the interferers for reliable transmissions. However, the intra cell users do not only experience small interferences but also they require small transmission power for stable communication. We provide a vector design algorithm based on ISR, where intra cell users are served through reusing the cell edge users' interference space. The performance enhancement reaches 20% compared to the fractional frequency reuse (FFR) scheme combined with IA through the scheduling between the cell edge users and the intra cell users. Also, it can be used to enhance the cell edge throughput when the quality of service (QoS) requirements of the intra cell users are fixed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.1A
• /
• pp.24-33
• /
• 2007

In this paper, two different dynamic cell coordination strategies for frequency flat and selective fading are proposed for efficient subcarrier allocation in the joint consideration of adaptive modulation and variable frequency reuse in the channel-aware OFDMA downlink multicellular environment. Compared to a conventional OFDMA system without cell coordination, where system throughput may become degraded due to the persistent interference from other cells, the proposed system dynamically allows RNC to apply different reuse factors on each subchannel and scheduling in consideration of channel and interference conditions of individual users so as to increase the system throughput and guarantee QoS of each user. In a frequency flat fading, the dynamic scheme with the proposed scheduling achieves on average three times larger throughput than the conventional dynamic scheme [8]. In a selective fading channel, the proposed schemes showed 2.6 times as large throughput as that of a single reuse factor of one for all subchannels.