• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.38 no.9
• /
• pp.12-20
• /
• 2001

The ATM-PON has an important meaning at next generation access network because the equipment transmits various types of user traffic with a single platform through the passive optical splitter. Ranging is a technology to place all ONUs at the same virtual distance in order to provide the synchronization for the upstream signal in the ATM-PON based on the Time Division Multiplexing (TDM). In this paper, we review the merits of ATM PON and related protocol for the PON operation. We summarize and analyze the steps about the ranging protocol based on ITU-T G.983.1 and implement a simulator that can simulate the ranging procedure based on our modeling. In this paper, we can investigate time requirements of G.983.1 by using the simulator and find out the wasted rate of the bandwidth during the ranging procedure in order to know the influence for ONUs while ATM-PON is in-service. Also, we show that a new ranging scheme reducing window size can avoid the degradation of quality of service of ONUs in service with simulation.

• Journal of Internet Computing and Services
• /
• v.15 no.1
• /
• pp.171-178
• /
• 2014

This paper presents dynamic modelling of a virtual object in augmented reality environments when external forces are applied to the object in real-time fashion. In order to simulate a natural behavior of the object we employ the theory of Newtonian physics to construct motion equation of the object according to the varying external forces applied to the AR object. In dynamic modelling process, the physical interaction is taken placed between the augmented object and the physical object such as a haptic input device and the external forces are transferred to the object. The intrinsic properties of the augmented object are either rigid or elastically deformable (non-rigid) model. In case of the rigid object, the dynamic motion of the object is simulated when the augmented object is collided with by the haptic stick by considering linear momentum or angular momentum. In the case of the non-rigid object, the physics-based simulation approach is adopted since the elastically deformable models respond in a natural way to the external or internal forces and constraints. Depending on the characteristics of force caused by a user through a haptic interface and model's intrinsic properties, the virtual elastic object in AR is deformed naturally. In the simulation, we exploit standard mass-spring damper differential equation so called Newton's second law of motion to model deformable objects. From the experiments, we can successfully visualize the behavior of a virtual objects in AR based on the theorem of physics when the haptic device interact with the rigid or non-rigid virtual object.

• The Journal of the Korea Contents Association
• /
• v.16 no.1
• /
• pp.541-557
• /
• 2016

The purpose of this study is to identifies services characteristics such as service customization, service ability, service empathy impacts on trust, affective commitment and calculative commitment, and explains causal role of affective commitment and calculative commitment by verifies relationships between trust and affective commitment and calculative commitment and customer loyalty in dental service setting. Analysis of structural equation modeling with SPSS 20.0 and AMOS 16.0 were performed to test the research hypothesis. The result of the study as follows: First, it was found that service customization had effect on affective commitment, and service ability had influence on trust, and service empathy impacts on both trust and affective commitment, but calculative commitment was not found to significant path coefficients in relationships with service characteristics. Second, trust had effects on calculative commitment, but not affective commitment. Third, affective commitment and calculative commitment positively had influence on customer loyalty. Therefore, Dental service providers should be increase user confidence by showing empathy and the ability to service. Customer who had formed trust is to build customer loyalty by inducing loyalty directly or by presents a variety of benefits indirectly. The high emotional attachment customer will have to present a suitable marketing strategies to build strong customer loyalty.

• Journal of Advanced Navigation Technology
• /
• v.19 no.4
• /
• pp.299-304
• /
• 2015

This paper introduces development of the MATLAB GUI based software for generating GPS RINEX observation file. The purpose of this software is to generate GPS measurements of reference station or dynamic user, which are similar to the real GPS receiver data, accurately and efficiently. This software includes two data generation modes. One is Precision mode which generates GPS measurements as accurate as possible using post-processing data. The other is Real-time mode which generates GPS measurements using GPS error modeling technique. GPS error sources are calculated on the basis of each data generation mode, and L1/L2 pseudorange, L1/L2 carrier phase, and Doppler measurements are produced. These generated GPS measurements are recorded in the RINEX observation version 3.0 file. Using received GPS data at real reference station, we analyzed three items to verify software reliability; measurement bias, rate of change, and noise level. Consequently, RMS error of measurement bias is about 0.7 m, and this verification results demonstrate that our software can generate relatively exact GPS measurements.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.10
• /
• pp.773-782
• /
• 2020

The development of joint FE models for deep learning neural network (DLNN)-based hybrid FEA is presented. Material models of bolts and bearings in the front axle of tractor, showing complex behavior induced by various tightening conditions, were replaced with DLNN models. Bolts are modeled as one-dimensional Timoshenko beam elements with six degrees of freedom, and bearings as three-dimensional solid elements. Stress-strain data were extracted from all elements after finite element analysis subjected to various load conditions, and DLNN for bolts and bearing were trained with Tensorflow. The DLNN-based joint models were implemented in the ABAQUS user subroutines where stresses from the next increment are updated and the algorithmic tangent stiffness matrix is calculated. Generalization of the trained DLNN in the FE model was verified by subjecting it to a new loading condition. Finally, the DLNN-based FEA for the front axle of the tractor was conducted and the feasibility was verified by comparing with results of a static structural experiment of the actual tractor.

• Journal of Distribution Science
• /
• v.13 no.10
• /
• pp.135-142
• /
• 2015

Purpose - Following the speedy development of the smart phone industry, tourism companies started to increase their brand recognition and sales volume by adopting mobile applications. However, applications for tourism industries are still insignificant. This study tries to analyze empirical evidence from Korean and Chinese consumers who have used mobile tour applications. By using an expansion of the technology acceptance model (TAM), this study will find what factors have effects on user intention for mobile tour applications. The findings will be helpful for the development of mobile tour applications and the tourism industries. Research design, data, and methodology - This study uses the TAM, which was presented by Davis in 1989. This study uses consumer acceptance level, consumer choice attitude, and use intention as the basic variables to fit to the TAM, and adopts choice content quality, brand value, and usage motivation as additional variables to analyze. This study has developed several hypotheses and collected data from 620 users who used mobile applications for tourism during April 1 to April 30, 2015. A total of 612 valid questionnaires were collected and used in the data analysis. The data was analyzed with structural equation modeling using SPSS Win/pc and Amos 22.0. Results - The findings can be summarized as follows: First, the content quality affects the consumer acceptance degree and choice attitude. Second, the brand value has a directly positive effect on the consumer acceptance degree and choice attitude. It is clear that the content quality and brand value play important roles in raising consumer acceptance and choice attitude. Third, usage motivation has no effect on the consumer acceptance degree and choice attitude. Fourth, the acceptance degree does not have any effect on the consumer choice attitude. Fifth, the acceptance degree affects the use intention. Last, the consumer choice attitude affects the use intentions. This indicates that consumer acceptance and choice attitude must both be achieved to induce use intention among consumers. Finally, the effects of the mobile tour application content quality and brand value on consumer acceptance degree and choice attitude were confirmed. Additionally, the effects of the consumer acceptance degree and choice attitude on use intentions were analyzed. Conclusion - It is not meaningful for tourism marketing to launch tour applications in the mobile market without understanding tourism consumer characteristics. When developing mobile tour applications, companies should focus on the characters of consumer choice attitudes as high quality, high brand value, usefulness, and ease of mobile tour applications. This study has limitations in that it did not consider negative factors such as perceived risks or analyze whether there are differences between Korean and Chinese consumers. In the future, we will consider equipping the same mobile tour applications commonly used by both Korean and Chinese consumers, and then examine negative factors as well as the differences in mobile tour applications between Korean and Chinese consumers.

• Science of Emotion and Sensibility
• /
• v.14 no.1
• /
• pp.17-26
• /
• 2011

Health care service's added value and sustainability has been formed, through the product developing about sports equipment and special equipment for disabled in order to improve the life quality, with the increasing population of elderly and the attention about health care. This research's design and 3 testing sections has been done according to design process for design development of functional bike. 1st test is done through researching from 4 aspects: structure, aesthetic, function and using. In the 2nd testing, 10 universal design items were used to evaluate 10 modeling samples, and sample F which has high evaluation overall was chosen. In 3rd test, evaluation was done from the user service scene about the mock-up with 1/4 scale size. PPP (product performance program) which is constructed with 60 evaluation items about functional bike's service was tested, and these items were fixed through discussing with experts. Through the result we knew the aesthetic elements had relationship with proportion, unity and typicality. In 10 items (55 survey items), the scores of items with physical exposure's minimization, simple and intuitively usage showed high, on the contrary, the other items' scores was very low, such as information delivery's consideration and thought, failure preventing. The evaluation will be done once more by health care experts, designers and elderly together if the physical model could be made for getting accurate measurement about above test result in the future.

• Journal of the Institute of Convergence Signal Processing
• /
• v.11 no.2
• /
• pp.177-182
• /
• 2010

The flow of a universal system-level design methodology consists of system specification, system-level hardware/software partitioning, co-design, co-verification using virtual or physical prototype, and system integration. In the developing process of a hardware component in system, the design phase has been regarded as a phase consuming lots of time and cost. However, the verification phase in which functionality of the designed component is verified has recently been considered as a much important phase. In this paper, the implementation of a verification environment which is based on SystemC infrastructure and verifies the functionality of a hardware component is described. The proposed verification system uses SystemC user-defined channel as communication interface between variables of SystemC module and registers of Verilog module. The functional verification of an UART is performed on the proposed verification system. SystemC provides class library for hardware modeling and has an advantage of being able to design a system consisting hardware and software in higher abstraction level than register transfer level. Source codes of SystemC modules are reusable with a minor adaptation on verifying functionality of another hardware component.

• Journal of Digital Contents Society
• /
• v.12 no.1
• /
• pp.85-94
• /
• 2011

QoS(Quality of Service) is defined as "The collective effect of service performance which determines the degree of satisfaction of a user of the service" by ITU-T Rec. E.800. While the use of VoIP(Voice Over Internet Protocol) has been widely implemented, persistent problems with QoS are a very important sue which needs to be solved. This research is finding the assignment of VoIP QoS to deduct how to manage the control system and presenting the QoS control process and framework under NGN(Next Generation Network) environment. The trial framework is the modeling of the QoS measurement metrics, instrument, equipment, method of measurement, the series of cycle & the methodology about analysis of the result of measurement. This research underlines that the vulnerability of the VoIP protocol in relation to its QoS can be guaranteed when the product quality and management are controlled and measured systematically. Especially it's very important time to maintain the research about VoIP QoS measurement and control because the big conversion of new network technology paradigm is now spreading. In addition, when the proposed method is applied, it can reduce an overall delay and can contribute to improved service quality, in relation to signal, voice processing, filtering more effectively.

• Journal of the Optical Society of Korea
• /
• v.19 no.6
• /
• pp.700-704
• /
• 2015

As pH is a widely used index in chemical, medical, and environmental applications, research on pH sensors has been active in recent years. This study obtained RGB values by measuring the reflected light from a liquid sample to detect fine changes in pH, and performed mathematical modeling to investigate the relationship between the detected optical signal and pH value. Also, the trends in pH changes were easily identified by analyzing RGB values and displaying them in the color coordinate for easy visualization of data. This method implemented a user-friendly system that can measure and analyze in real time. This system can be used in many fields such as genetic engineering, environmental engineering, and clinical engineering, because it not only can measure pH but also replaces a colorimeter or turbidimeter.