• Journal of Korean Society of Forest Science
• /
• v.111 no.1
• /
• pp.136-149
• /
• 2022

In this study, the performance of a nonlinear mixed-effects (NLME) model used to estimate the stem taper of Pinus densiflora in Gangwon Province was compared with that of a nonlinear fixed-effects (NLFE) model using several performance measures. For the diameters of whole tree stems, the NLME model improved on the performance of the NLFE model by 26.4%, 42.9%, 43.1%, and 0.9% in terms of BIAS, MAB, RMSE, and FI, respectively. For the cross-section areas of whole tree stems, the NLME model improved on the performance of the NLFE model by 67.7%, 44.7%, 45.8%, and 1.0% in terms of BIAS, MAB, RMSE, and FI, respectively. Based on the analysis of 12 relative height classes of tree stems, stem taper estimation performance was also reasonably improved by the NLME model, which showed better MAB, RMSE, and FI at every relative height class compared with those of the NLFE model. In some classes, the NLFE model had better BIAS than the NLME model (stem diameter: 0.05, 0.2, 0.3, and 0.8; stem cross-section area: 0.05, 0.3, 0.5, 0.6, and 1.0). However, the NLME model enhanced the performance of stem diameter and cross-section area estimations at the lowest stem part (0.2 m from the ground). Improvements for stem diameter in terms of BIAS, MAB, RMSE, and FI were 84.2%, 69.8%, 68.7%, and 3.1%, respectively. For stem cross-section areas, the improvements in BIAS, MAB, RMSE, and FI were 98.5%, 70.1%, 68.7%, and 3.1%, respectively. The cross-section area at 0.2 m from the ground occupied 22.7% of total cross-section area. Improvements in estimation of cross-section area at the lowest stem part indicate that stem volume estimation performance could also be enhanced. Although NLME models are more difficult to fit than NLFE models, the use of NLME models as a standard method for the estimating the parameters of stem taper equations should be considered.

• (The) Research of the performance art and culture
• /
• no.39
• /
• pp.279-323
• /
• 2019

The musical characteristics of Fishing songs in North Korean which recorded on Anthology of North Korean Folk Songs were examined in this paper. The results are as follows. Among Fishing songs in North Korea, there are "Rowing Song," the "Song for Hauling Nets," and the "Song for Picking Up Fish" in songs related to walleye pollack fishing and in songs related to croaker fishing, the "Song for Dropping Anchor" and the "Full-Load-of-Fish Song" in songs related to croaker fishing, the "Song for Weighing Anchor," the "Song for Shaking Fish," the "Full-Load-of-Fish Rowing Song," and the "Song for Hanging Walleye Pollack" in songs related to walleye pollack fishing. There are the "Song for Setting a sail" and the "Song for catching shells" in Fishing songs in North Korea, too. In the rhythmic elements of Fishing songs in North Korea, the tempo of the "Songs for Setting a sail" is moderato, and that of the "Songs for Picking Up Fish" of songs related to anchovy or herring fishing is quite slow. "Rowing Songs"(croaker fishing) have various tempos but faster than moderato, and usually get faster and faster as time goes by. Most songs have 4/♩. time and there are some of 2, 3 or 5 time. Some songs use irregular time or 6 time overlapping 2 beats. The mode Menari is the most common tonal system used in fishing songs of North Korea. And the mode Susimga, the mode Changbutaryeong, the mode Nanbongga, and the mode Odolttogi are also used in the tonal system of Fishing songs in North Korea. There are shoutting intonations that have indefinite pitch, too. Modulation or interaction by the mode Changbutaryeong appeared in songs of the mode Menari. There is a tendency to favor a certain tonal system by category. Responsorial form is mostly used, but in the most cases, they were sung in solo. In responsorial songs, several calling songs overlap with the responding songs. Durchkomponiert form is sung by antiphon or in solo, but the case sung in solo originally seems to have been sung by antiphon or unison, if we consider the procedure of the work. The "Song for Picking Up Fish" of Seonbong-gun of North Hamgyeong Province and Yangyang-gun of Gangwon Province, the "Full-Load-of-Fish Song-Bongjuktaryeong" of Jeungsan-gun of South Pyeongan Province and "Full-Load-of-Fish Song-Baechigisory" of Taean-gun of South Chungcheong Province, "Rowing Song" of Nampo City and Ganghwa-gun of Gyeonggi Province are resembled. In neighboring areas, even if the songs of different categorys, sometimes share a same melody. In a certain category, sometimes a same melody is shared to a considerable distance. It was first identified that in anchovy or herring fishing or dybowskii' sand eel fishing, the "Song for Picking Up Fish" is widely shared in the East Sea Coast area.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.19-19
• /
• 2022

Hulled and naked oat is a perspective crop for the low input production systems due to its low requirements for soil quality and nutrition. Oats have good competitive ability against weeds and can provide appropriate yield in organic farming in comparison with other cereal species such as wheat or barley. It is a perspective crop from the point of view of use in the food industry too. The aim of our study was to compare the production and quality parameters of naked and hulled oat grown in both organic (OF) and conventional fields (CF). Small plot trials were conducted in two locations in the Czech Republic (České Budějovice, Prague) for four years (2018-2021) in two production systems (OF, and CF). We used four varieties of hulled oat (Korok, Kertag, Raven, Seldon) and one variety of naked oat (Patrik). During the vegetation, agronomically important data were recorded. After harvest samples were processed in the laboratory and analyzed selected quality parameters of grain dry matter (the protein content was determined by the Kjeldahl method, starch content in grain according to Ewers, fat content in grain dry matter by the modified method according to Soxhlet, and ash content in grain dry matter). The data were evaluated using the program STATISTICA version 13.2, StatSoft, Inc., California, USA. It is clear from the results that the number of panicles before the harvest was influenced by the location, cultivation system, year, and, to a lesser extent, the influence of the variety. The number of panicles in OF averaged 340 per square meter, which was 90% of the value of CF. For thousand grain weight (TGW), a significantly predominant effect of year was found. The independent effect of location on TGW was statistically not significant. Grain yield was predominantly influenced by cultivation system and location. In OF, it reached an average of 3.97 t.ha^-1, which was 75% of the yield of CF. As part of the evaluation of the basic grain quality indicators, the content of protein, starch, fat, and ash in the dry matter of the grain was evaluated. The content of protein in the dry matter of the grain was predominantly influenced by year, followed by the influence of the variety and a fairly comparable influence of the cultivation system and locality. On average, it achieved 16.05% in OF and 17.01% in CF. The starch content was then related to the protein content, where as a result of the lower protein content in the grain of OF oats, the content of starch and fat was on the contrary increased. The year turned out to be the most significant factor, affecting both the starch content in the dry matter of the grain and the fat content. This was followed again by a fairly comparable influence on the cultivation system and locality. The influence of the cultivation system and location was not statistically significantly applied in the case of ash content in dry matter. Based on our results we can propose both types of oat (hulled and naked) as perspective crops for OF. An organic farmer can expect to achieve stable yields which, in less favorable conditions for the production of cereals in the OF, may be close to the level of conventional yields. In the future, it will be important to change agrotechnology in OF and increase oat yield because this crop has a good potential to grow in areas with low nitrogen input or less fertile soil.

• Korean Journal of Remote Sensing
• /
• v.39 no.6_1
• /
• pp.1255-1272
• /
• 2023

Satellite-based chlorophyll-a concentration, produced as a long-term time series, is crucial for global climate change research. The production of data without gaps through the merging of time-synthesized or multi-satellite data is essential. However, studies related to satellite-based chlorophyll-a concentration in the waters around the Korean Peninsula have mainly focused on evaluating seasonal characteristics or proposing algorithms suitable for research areas using a single ocean color sensor. In this study, a merging dataset of remote sensing reflectance from the geostationary sensor GOCI-II and polar-orbiting sensors (MODIS, VIIRS, OLCI) was utilized to achieve high spatial coverage of chlorophyll-a concentration in the waters around the Korean Peninsula. The spatial coverage in the results of this study increased by approximately 30% compared to polar-orbiting sensor data, effectively compensating for gaps caused by clouds. Additionally, we aimed to quantitatively assess accuracy through comparison with global chlorophyll-a composite data provided by Ocean Colour Climate Change Initiative (OC-CCI) and GlobColour, along with in-situ observation data. However, due to the limited number of in-situ observation data, we could not provide statistically significant results. Nevertheless, we observed a tendency for underestimation compared to global data. Furthermore, for the evaluation of practical applications in response to marine disasters such as red tides, we qualitatively compared our results with a case of a red tide in the East Sea in 2013. The results showed similarities to OC-CCI rather than standalone geostationary sensor results. Through this study, we plan to use the generated data for future research in artificial intelligence models for prediction and anomaly utilization. It is anticipated that the results will be beneficial for monitoring chlorophyll-a events in the coastal waters around Korea.

• Journal of Venture Innovation
• /
• v.3 no.2
• /
• pp.41-76
• /
• 2020

This study confirmed factors affecting smart factory technology acceptance through empirical analysis. It is a study on what factors have an important influence on the introduction of the smart factory, which is the core field of the 4th industry. I believe that there is academic and practical significance in the context of insufficient research on technology acceptance in the field of smart factories. This research was conducted based on the Unified Theory of Acceptance and Use of Technology (UTAUT), whose explanatory power has been proven in the study of the acceptance factors of information technology. In addition to the four independent variables of the UTAUT : Performance Expectancy, Effort Expectancy, Social Influence, and Facilitating Conditions, Government Assistance Expectancy, which is expected to be an important factor due to the characteristics of the smart factory, was added to the independent variable. And, in order to confirm the technical factors of smart factory technology acceptance, the Task Technology Fit(TTF) was added to empirically analyze the effect on Behavioral Intention. Trust is added as a parameter because the degree of trust in new technologies is expected to have a very important effect on the acceptance of technologies. Finally, empirical verification was conducted by adding Innovation Resistance to a research variable that plays a role as a moderator, based on previous studies that innovation by new information technology can inevitably cause refusal to users. For empirical analysis, an online questionnaire of random sampling method was conducted for incumbents of domestic small and medium-sized enterprises, and 309 copies of effective responses were used for empirical analysis. Amos 23.0 and Process macro 3.4 were used for statistical analysis. For accurate statistical analysis, the validity of Research Model and Measurement Variable were secured through confirmatory factor analysis. Accurate empirical analysis was conducted through appropriate statistical procedures and correct interpretation for causality verification, mediating effect verification, and moderating effect verification. Performance Expectancy, Social Influence, Government Assistance Expectancy, and Task Technology Fit had a positive (+) effect on smart factory technology acceptance. The magnitude of influence was found in the order of Government Assistance Expectancy(β=.487) > Task Technology Fit(β=.218) > Performance Expectancy(β=.205) > Social Influence(β=.204). Both the Task Characteristics and the Technology Characteristics were confirmed to have a positive (+) effect on Task Technology Fit. It was found that Task Characteristics(β=.559) had a greater effect on Task Technology Fit than Technology Characteristics(β=.328). In the mediating effect verification on Trust, a statistically significant mediating role of Trust was not identified between each of the six independent variables and the intention to introduce a smart factory. Through the verification of the moderating effect of Innovation Resistance, it was found that Innovation Resistance plays a positive (+) moderating role between Government Assistance Expectancy, and technology acceptance intention. In other words, the greater the Innovation Resistance, the greater the influence of the Government Assistance Expectancy on the intention to adopt the smart factory than the case where there is less Innovation Resistance. Based on this, academic and practical implications were presented.

• Journal of Korea Water Resources Association
• /
• v.56 no.12
• /
• pp.993-1003
• /
• 2023

Due to the increasing greenhouse gas emissions, the global mean temperature has risen by 1.1℃ compared to pre-industrial levels, and significant changes are expected in functioning of water supply systems. In this study, we assessed impacts of climate change and instreamflow management on water supply reliability in the Geum River basin, Korea. We proposed univariate climate response functions, where mean precipitation and potential evaporation were coupled as an explanatory variable, to assess impacts of climate stress on multiple water supply reliabilities. To this end, natural streamflows were generated in the 19 sub-basins with the conceptual GR6J model. Then, the simulated streamflows were input into the Water Evaluation And Planning (WEAP) model. The dynamic optimization by WEAP allowed us to assess water supply reliability against the 2020 water demand projections. Results showed that when minimizing the water shortage of the entire river basin under the 1991-2020 climate, water supply reliability was lowest in the Bocheongcheon among the sub-basins. In a scenario where the priority of instreamflow maintenance is adjusted to be the same as municipal and industrial water use, water supply reliability in the Bocheongcheon, Chogang, and Nonsancheon sub-basins significantly decreased. The stress tests with 325 sets of climate perturbations showed that water supply reliability in the three sub-basins considerably decreased under all the climate stresses, while the sub-basins connected to large infrastructures did not change significantly. When using the 2021-2050 climate projections with the stress test results, water supply reliability in the Geum River basin was expected to generally improve, but if the priority of instreamflow maintenance is increased, water shortage is expected to worsen in geographically isolated sub-basins. Here, we suggest that the climate response function can be established by a single explanatory variable to assess climate change impacts of many sub-basin's performance simultaneously.

• Journal of The Korean Association For Science Education
• /
• v.29 no.2
• /
• pp.137-155
• /
• 2009

The purpose of the present study was to analyse the effectiveness of a gifted education program. To analyse the effectiveness of an education program for the gifted affiliated with a university, the study carried out a quasi-experimental design to compare the 153 gifted students who enrolled in an education center for the gifted and the 131 potentially gifted students who were nominated by teachers for their high achievements and interests in science but without any education services for the gifted. These two groups of students were compared in the aspects of problem finding ability in science, motivation, self regulation, science-related attitudes, and science anxiety through the pre- and post-treatment settings. The results indicated that the gifted group showed a significant improvement in originality and elaboration of problem-finding ability, but the potentially gifted group showed significant decrease in most variables of problem finding. Related to motivation and self-regulated learning, gifted students showed an increase in cognitive strategy use and decrease in intrinsic value, but the potentially gifted students showed significant decreases in most variables related to motivation and self-regulation, except intrinsic value. Related to the scientific attitudes and science anxiety, there were no significant changes between pre- and post-tests in the gifted group, but significant decreases in most variables were found in the potentially gifted group. The results of paired t-test and Ancova indicate that significant differences between the gifted and the potentially gifted groups are mainly due to the significantly lowered performance in post tests in the potentially gifted group, rather than a significant increase in gifted group.

• Journal of Korean Society of Disaster and Security
• /
• v.17 no.1
• /
• pp.9-16
• /
• 2024

In Korea, as disasters become larger and more complex, there is a trend of shifting from a focus on response and recovery to a focus on prevention and preparedness. In order to prevent and prepare for disasters, each local government manages disaster management resources by stockpiling them. However, although disaster management resources are stored in individual warehouses, they are managed by department rather than by warehouse, resulting in insufficient management of disaster management resources due to the heavy workload of those in charge. In order to intensively manage these disaster management resources, an integrated disaster management resource management center is established and managed at the metropolitan/provincial level. In the case of Gangwon-do, the subject of this study, a warehouse is rented and operated as an integrated disaster management resource management center. When leasing an integrated management center, there is the inconvenience of having to move the location every 1 to 2 years, so it is deemed necessary to build a dedicated facility in an available site. To select a location candidate, network analysis was used to measure access to and use of facilities along interconnected routes of networks such as roads and railways. During network analysis, the Location-Allocation method, which was widely used in the past to determine the location of multiple facilities, was applied. As a result, Hoengseong-gun in Gangwon-do was identified as a suitable candidate site. In addition, if the integrated management center uses our country's logistics system to stockpile disaster management resources, local governments can mobilize disaster management resources in 3 days, and it is said that it takes 3 days to return to normal life after a disaster occurs. Each city's disaster management resource stockpile is 3 days' worth per week, and the integrated management center stores 3 times the maximum of the city's 4-day stockpile.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.12 no.1
• /
• pp.8-16
• /
• 2024

Limestone (CaCO₃, calcium carbonate), which is used as a raw material in the portland cement and steel industry, emits CO₂ through decarbonation by high temperatures in the manufacturing process. To reduce CO₂ emissions by the use of raw materials like limestone, it has been proposed to replace limestone with various industrial by-products that contain CaO but less or none of the carbonated minerals, that cause CO₂ emissions. Loss of Ignition (LOI), Thermogravimetric analysis (TG), and Infrared Spectroscopy (IR) are used to quantitative the amount of CO₂ emission by using these industrial by-products, but CO₂ emissions can be either over or underestimated depending on the characteristics of by-product materials. In this study, we estimated CO₂ contents by LOI, TG, IR and DTG(Differential Thermogravimetric analysis) of calcite(CaCO₃) and samples that contain CO₂ in the form of carbonate and whose weight increases by oxidation at high temperatures. The test results showed for CaCO₃ samples, all test methods have a sufficient level of reliability. On the other hand, for the CO₂ content of the sample whose weight increases at high temperature, LOI and TG did not properly estimate the CO₂ content of the sample, and IR tended to overestimate compared to the predicted value, but the estimated result by DTG was close to the predicted valu e. From these resu lts, in the case of samples that contain less than a few percent of CO₂ and whose weight increases during the temperature that carbonate minerals decompose, estimating the CO₂ content using DTG is a more reasonable way than LOI, TG, and IR.

• Journal of Korean Society of Forest Science
• /
• v.113 no.1
• /
• pp.118-130
• /
• 2024

Rehabilitation of mining areas can reduce damage to ecosystems. However, the effects of rehabilitation on ecosystem services (ESs) and its contribution to local communities are not well known. Thus, the aims of this study were to clearly identify the ES beneficiaries affected by mining activities, to determine how the beneficiaries profit from surrounding areas in cooperation with local stakeholders, and to manage the rehabilitation areas for the ESs that the beneficiaries want. This study chose 18 ESs (4 provisioning, 7 regulating, 5 cultural, and 2 habitat services) based on The Economics of Ecosystems and Biodiversity. A semi-structured questionnaire survey using an 11-point Likert scale was conducted among 87 community residents to investigate social awareness and identify key ESs. The survey results from two local communities showed high awareness and demands mainly on cultural (mental and physical health, aesthetic appreciation, and recreation) and regulating services (local climate and air quality, and moderation of extreme events). These services were related to the daily lives of residents in local communities, provided positive benefits, and potentially improved the residents' future livelihoods. However, the average questionnaire scores were limited to 6-7 points, indicating that the benefits to local communities were meager. The residents' awareness of provisioning service was negative, even if it provided goods and profit opportunities. This indicated a disconnection between local communities and provisioning services due to forest rehabilitation that did not consider local communities that traditionally relied on specific provisioning services before the onset of mining activities. Future forest rehabilitation in abandoned mine areas must consider the welfare of local communities for sustainable use of rehabilitated forests and enhancing ESs. In this study, only a qualitative evaluation based on frequency analyses was conducted. The quantification and valuation of key ESs are warranted in the future to promote ESs from forest rehabilitation in abandoned mine areas. The study results would be useful for developing site-specific ES promotion strategies for reforesting mine areas.