• Proceedings of the Korean Institute of Building Construction Conference
• /
• v.y2004m10
• /
• pp.15-19
• /
• 2004

The production of waste concrete is increased continuously by urban renewal, reconstruction, remodeling, and so on. So the positive use of recycled aggregate concrete is needed. Research for recycled aggregate concrete that use recycled aggregate from the mid-80s to solve environmental problem of aggregate insufficiency and waste concrete is consisting vigorously. However, specifications and mix design about waste concrete's use are evading use of recycled aggregate concrete yet in spot being not taken a triangular position. Therefore. it analyze existing research data for recycled aggregate concrete collection to develop strength estimate program in this research. Recycled aggregate concrete's strength estimate program if specifications and mix design about recycled aggregate concrete are taken a triangular position to foundation recycled aggregate concrete's practical use to increase judge.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2022.04a
• /
• pp.168-169
• /
• 2022

The continuous development of science and technology since the Industrial Revolution and the development of human civilization are based on the use of fossil fuels. However, the use of fossil fuels is increasing the greenhouse gas, the main cause of global warming, and global warming is an extreme climate anomaly that is rapidly increasing human and material damage. Therefore, efforts are being made worldwide to return greenhouse gases to pre-industrial levels. In Korea, 2050 carbon neutrality has been set as a major policy and efforts are being made to curb carbon emissions in the overall industry. Carbon emission suppression is based on the minimization of fossil fuel use, and research and development are underway on building a zero-emission house that minimizes the energy used in buildings in the construction field. Therefore, in this study, as part of the zero-emissions water system construction, waste resources generated at industrial sites were utilized and an integrated lightweight concrete solar panel grafted with a concrete lightweight panel and solar panel was manufactured and the possibility of its use was evaluated.

• International Journal of Costume and Fashion
• /
• v.14 no.1
• /
• pp.63-73
• /
• 2014

With the rapid development of digital technologies potential exists to expand upon the accessibility of fashion archives and increase their use as a pedagogical tool for research. At present this is compromised due the three-dimensional, tactile nature of the objects being viewed and the fact that they are not necessarily replicable in a digital format. The aim of this paper is to examine art and design students physical object research skills and discuss how they are positioned in relation to creative tools and strategies they use to produce outcomes such as they own collections and design responses. Findings and conclusions are drawn from projects concerned with the development and use of physical and virtual archives and inform the methodology used. Traditional methods and tools within higher education are discussed together with students increased use of digital resources and innovative ways to engage students. The academic challenge of supporting student engagement in archival research across digital and physical dimensions is explored. The papers findings indicate a need for further research considering the impact of digital technology on students' physical integration with archives and the need for more structured support surrounding student physical and digital research investigations.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2022.11a
• /
• pp.217-218
• /
• 2022

Supervision work deals with important data necessary for the performance management on building construction sites in accordance with the Building Act. Therefore, this study attempts to use the data from supervisory reports to measure the performance of private building projects. Performance measurement is important for systematic management. However, there are only a few cases in which performance measurement is performed because it requires strenuous efforts to collect data for measurement. First, this study derived 6 performance areas and 15 indicators through a few rounds of expert group discussions. Then, we confirmed the performance indicators with high feasibility of data collection through a survey of supervision experts. It is expected that the data of supervisory reports can measure systematically performance and assist in speedy diagnosis of private building construction sites.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.2
• /
• pp.164-170
• /
• 2013

The commercial buildings are consuming about 30% of total energy used in Korea. And a large amount of energy consumption in commercial buildings is consumed by HVAC(Heating, Ventilation, Air Conditioning) system. Therefore, if we can reduce the energy consumption in HVAC or air-conditioning system in commercial buildings, the overall energy consumption in Korea can be reduced. Currently, an electricity charge called Time of Use (TOU) is applied to typical commercial buildings. This paper proposes the novel energy management method where the temperature setting of air-conditioning system are adjusted to minimize the use of electrical energy while indoor comfort level is retained. The simulation test for a typical commercial building shows that the proposed method gives over 10% savings in electricity bills and electricity consumption compared to the conventional air-conditioning method.

• Journal of Korean Association for Spatial Structures
• /
• v.10 no.1
• /
• pp.111-117
• /
• 2010

This thesis draws institutional problem about safety of architectural structure through analysis of architectural structure regulation. The law of analysis target are building codes, enforcement ordinance of building codes, enforcement regulations of building codes, regulation for structure standards of building, building structure standards. The analysis showed there are imperfections in confirmed procedural application of structure safety and suggested reformation. It's necessary to make supplementary policies for the suitability of the term use and the structure safety certificate of compliance, establishing a special structure code.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.7 no.4
• /
• pp.133-142
• /
• 2004

As the city grows in population and size, land-use plan increasingly becomes a crucial element in developing a city-wide plan. In the process of developing the land use plan, identifying the present conditions and predicting the future conditions are the most important steps. That is, to understand the phenomena of land-use activities as well as to manage uses of the land efficiently require the comprehensive land use information system. This study intends to construct the land use database utilizing the Cadastral Map and Registered Building Data and to examine and suggest the application areas of the database. The database was constructed with those of Busan Metropolitan City. Using the established data, it shows how to use the database to identify the present conditions in Busan.

• Architectural research
• /
• v.12 no.2
• /
• pp.9-14
• /
• 2010

This paper introduces an experimental design studio that explores the optimal use of current digital technologies in order to employ Building Information Modeling at the early phase of design process. Based upon the outcomes from the aforementioned studio, the paper discusses the integrated design strategies for BIM in the design process. In this paper, BIM is proposed as a design tool that increases an overal design productivity more effectively and efficiently compared to BIM as a construction tool with encouraging a design communication among different partakers in the design process.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.5 no.4
• /
• pp.45-55
• /
• 2002

The purpose of this study is to suggest the way of analyzing land uses to utilize GIS in the field of urban planning. The Saga Land Information System was built in early 1990s. The building data were inputted by house investigation map(1/1,000) using digitizer. And urban planning basis investigation data in 1994 were utilized as the attribute data. Also, by calculating specialization factor, we distinct the characteristic of every land use of the city, and it compares every land use zone. This study calculated and compared an observation frequency and an expectation frequency of every building use and land use zone. We found that the use of the building tend to be controlled and guided by the land use zone.

• International conference on construction engineering and project management
• /
• 2013.01a
• /
• pp.304-307
• /
• 2013

Various programs have been developed to predict the energy consumption of a building as a result of recent increased social interest in the environmental friendliness of construction as measured by energy efficiency. The goal of environmental-friendliness, which is achieved by predicting the energy consumption of a building, can be realized in the design stage by applying a variety of technologies, planning factors and planning systems. However, most energy analyzing engines are only suitable for use in the advanced stages of design because of the large amount of design information that must be entered. Thus, because the simulation programs currently used are not suitable for use in the early stages of design, this study suggests a prediction logic that provides an overview of the energy consumption of a building according to its size, scope, and purpose by analyzing statistics collected by government agencies.