• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.1
• /
• pp.148-154
• /
• 2020

This study examines room assignments to improve accessibility in a university dormitory depending on the student grade, taking into account frequency of using a certain common space. An integer programming model is presented to minimize the total moving distance from the common space to the students' rooms for accessibility. The model also constrains the maximum capacity of a room, and disallows different grade students to be assigned to the same room. This model is similar to a facility location problem used widely in the supply chain management field. Applying our optimization model to a small group at the dormitory of Unversity A as the case study, our results indicate that lower grade students are assigned rooms closer to the common space due to their higher frequency of using that space to guarantee high accessibility. Moreover, if higher grade students are prioritized to select their rooms, we suggest an objective function that imposes a penalty in cases when lower grade students select rooms with priority. Based on the results obtained, we propose assigning rooms to students in a dormitory by considering their complex requirements and convenience to use the common space.

• KDI Journal of Economic Policy
• /
• v.36 no.1
• /
• pp.43-80
• /
• 2014

This study suggests a model for calculating total benefit rigorously to use the contingent valuation method (CVM) in cost-benefit analysis (CBA). Estimating households' willingness to pay through survey method, the study attempts to demonstrate if a respondent's income and the distance between a respondent's residence and the location of a target facility affect her willingness to pay. The estimation results from a structural model show that income and distance-decay effects exist and that the calculated total benefit varies largely when these effects are ignored. The study emphasizes the effects of income and distance-decay on the total benefit must be carefully considered in using CVM for CBA. Even though the total project cost is precisely estimated, the benefit/cost (B/C) ratio may differ largely when the total benefit is not correctly calculated. Also, an ad hoc model generates significantly different estimates from the utility difference model this study adopted. The difference in estimates suggests that the total benefit has to be estimated by a structural model. Finally, simulations are performed to check the validity of the model as well as to predict consequences when income and distance-decay effects are not properly treated. The results from simulations reveal it is not desirable to ignore those effects considering the perspectives of balanced regional development.

• Journal of National Security and Military Science
• /
• s.7
• /
• pp.271-303
• /
• 2009

"Ubiquitous sensor network" definition is this-Someone attaches electro-magnetic tag everything which needs communication between man to man, man to material and material to material(Ubiquitous). By using attached every electro-magnetic tag, someone detects it's native information as well as environmental information such as temperature, humidity, pollution and infiltration information(Sensor). someone connects it realtime network and manage generated information(Network). 21st century's war is joint combined operation connecting with ground, sea and air smoothly in digitalized war field, and is systematic war provided realtime information from sensor to shooter. So, it needs dramatic development on watch reconnaissance, command and control, pinpoint strike etc. Ubiquitous computing and network technologies are essential in national defense to operate 21st century style war. It is possible to use many parts such as USN combined smart dust and sensor network to protect friend unit as well as to watch enemy's deep area by unmanned reconnaissance, wearable computer upgrading soldier's operational ability and combat power dramatically, RFID which can be used material management as well as on time support. Especially, unmanned watch system using USN is core part to transit network centric military service and to get national defense efficiency which overcome the dilemma of national defense person resource reducing, and upgrade guard quality level, and improve combat power by normalizing guardian's bio rhythm. According to the test result of sensor network unmanned watch system, it needs more effort and time to stabilize because of low USN technology maturity and using maturity. In the future, USN unmanned watch system project must be decided the application scope such as application area and starting point by evaluating technology maturity and using maturity. And when you decide application scope, you must consider not only short period goal as cost reduction, soldier decrease and guard power upgrade but also long period goal as advanced defense ability strength. You must build basic infra in advance such as light cable network, frequency allocation and power facility etc. First of all, it must get budget guarantee and driving force for USN unmanned watch system project related to defense policy. You must forwarded the USN project assuming posses of operation skill as procedure, system, standard, training in advance. Operational skill posses is come from step by step application strategy such as test phase, introduction phase, spread phase, stabilization phase and also repeated test application taking example project.

• Progress in Medical Physics
• /
• v.18 no.4
• /
• pp.226-232
• /
• 2007

We studied a Monte Carlo simulation of the proton beam delivery system at the National Cancer Center (NCC) using the Geant4 Monte Carlo toolkit and tested its feasibility as a dose verification framework. The Monte Carlo technique for dose calculation methodology has been recognized as the most accurate way for understanding the dose distribution in given materials. In order to take advantage of this methodology for application to external-beam radiotherapy, a precise modeling of the nozzle elements along with the beam delivery path and correct initial beam characteristics are mandatory. Among three different treatment modes, double/single-scattering, uniform scanning and pencil beam scanning, we have modeled and simulated the double-scattering mode for the nozzle elements, including all components and varying the time and space with the Geant4.8.2 Monte Carlo code. We have obtained simulation data that showed an excellent correlation to the measured dose distributions at a specific treatment depth. We successfully set up the Monte Carlo simulation platform for the NCC proton therapy facility. It can be adapted to the precise dosimetry for therapeutic proton beam use at the NCC. Additional Monte Carlo work for the full proton beam energy range can be performed.

• KDI Journal of Economic Policy
• /
• v.34 no.1
• /
• pp.135-168
• /
• 2012

This study analyzes ways to detect protest responses (hereafter, PR zero-bid) in the contingent valuation method (CVM). In order to distinguish PR zero-bids from true zero-bids (non-PR zero bids), this study adopts the concept of the implicit willingness to pay employing the Hicksian compensating surplus and the Taylor's 1st order approximation. When a respondent proposes a zero-bid (i.e., WTP=0) and chooses a PR filtering item to indicate that her implicit WTP is not necessary zero, her response is identified as a PR zero bid. PR filtering items falling into the PR zero bids category include the uncertainty of information, distrust in the government and project achievement, disagreement to project plans, discontent with the fairness of public works and their payment method and animosity against the CVM itself. The empirical analysis shows that PR zero bids take place systematically in particular respondent groups: respondents who have never used similar facilities before nor plans to use the facility provided by the public project, the employed, and low income groups. In conclusion, the study suggests that a CVM questionnaire needs to be designed carefully to minimize problems associated with PR zero bids and the potential risks of having sample selection bias should be concerned.

• The Korean Journal of Air & Space Law and Policy
• /
• v.18
• /
• pp.135-183
• /
• 2003

Aerospace force is a determining factor in a modem war. The combat field is expanding to space. Thus, the legitimacy of establishing aerospace force is no longer an debating issue, but "how should we establish aerospace force" has become an issue to the military. The standard limiting on the military use of space should be non-aggressive use as asserted by the U.S., rather than non-military use as asserted by the former Soviet Union. The former Soviet Union's argument is not even strongly supported by the current Russia government, and realistically is hard to be applied. Thus, the multi-purpose satellite used for military surveillance or a commercial satellite employed for military communication are allowed under the U.S. principle of peaceful use of space. In this regard, Air Force may be free to develop a military surveillance satellite and a communication satellite with civilian research institute. Although MTCR, entered into with the U.S., restricts the development of space-launching vehicle for the export purpose, the development of space-launching vehicle by the Korea Air Force or Korea Aerospace Research Institute is beyond the scope of application of MTCR, and Air Force may just operate a satellite in the orbit for the military purpose. The primary task for multi-purpose satellite is a remote sensing; SAR sensor with high resolution is mainly employed for military use. Therefore, a system that enables Air Force, the Korea Aerospace Research Institute, and Agency for Defense Development to conduct joint-research and development should be instituted. U.S. Air Force has dismantled its own space-launching vehicle step by step, and, instead, has increased using private space launching vehicle. In addition, Military communication has been operated separately from civil communication services or broadcasting services due to the special circumstances unique to the military setting. However, joint-operation of communication facility by the military and civil users is preferred because this reduces financial burden resulting from separate operation of military satellite. During the Gulf War, U.S. armed forces employed commercial satellites for its military communication. Korea's participation in space technology research is a little bit behind in time, considering its economic scale. In terms of budget, Korea is to spend 5 trillion won for 15 years for the space activities. However, Japan has 2 trillion won annul budget for the same activities. Because the development of space industry during initial fostering period does not apply to profit-making business, government supports are inevitable. All space development programs of other foreign countries are entirely supported by each government, and, only recently, private industry started participating in limited area such as a communication satellite and broadcasting satellite, Particularly, Korea's space industry is in an infant stage, which largely demands government supports. Government support should be in the form of investment or financial contribution, rather than in the form of loan or borrowing. Compared to other advanced countries in space industry, Korea needs more budget and professional research staff. Naturally, for the efficient and systemic space development and for the prevention of overlapping and distraction of power, it is necessary to enact space-related statutes, which would provide dear vision for the Korea space development. Furthermore, the fact that a variety of departments are running their own space development program requires a centralized and single space-industry development system. Prior to discussing how to coordinate or integrate space programs between Agency for Defense Development and the Korea Aerospace Research Institute, it is a prerequisite to establish, namely, "Space Operations Center"in the Air Force, which would determine policy and strategy in operating space forces. For the establishment of "Space Operations Center," policy determinations by the Ministry of National Defense and the Joint Chief of Staff are required. Especially, space surveillance system through using a military surveillance satellite and communication satellite, which would lay foundation for independent defense, shall be established with reference to Japan's space force plan. In order to resolve issues related to MTCR, Air Force would use space-launching vehicle of the Korea Aerospace Research Institute. Moreover, defense budge should be appropriated for using multi-purpose satellite and communication satellite. The Ministry of National Defense needs to appropriate 2.5 trillion won budget for space operations, which amounts to Japan's surveillance satellite operating budges.

• Korean Journal of Heritage: History & Science
• /
• v.55 no.1
• /
• pp.281-304
• /
• 2022

Heungdeokjeon was the first pavilion built on the site of Sueocheong during the expansion of Gyeongungung. In this study, we tried to clarify the specific construction process of Heungdeokjeon, which was used for various purposes such as the copy location for Portraits of ancestors, temporary enshrinement site, and the funeral building for the rest of the body, which is Binjeon. In addition, we tried to confirm the historical value based on the characteristics derived by the history of the building and the rituals performed. Heungdeokjeon began to be built in the second half of 1899, and is estimated to have been completed between mid-February and mid-March 1900. It was a ritual facility equipped with waiting rooms for the emperor and royal ladies as an annex. The relocation work was planned in April 1901 and began in earnest after June, and it was closely linked to the construction of attached buildings of Seonwonjeon. In addition, comparing the records on the construction and relocation cost of Heungdeokjeon with those related to the reconstruction of Seonwonjeon, it was confirmed that annex buildings of Heungdeokjeon were relocated and used as annex buildings of Seonwonjeon. The characteristics identified in the process of Heungdeokjeon used as a place to copy portraits are as follows. First, it was used as a place to copy portraits twice in a short period of time. Second, it was the place where the first unprecedented works were carried out in relation to the copying of portraits. Third, the pavilion, which was specially built for imperial rituals, was used as a place to copy portraits. Since then, it has been used as a funeral building for the rest of the body, and features different from those of the previous period are identified. It was the building dedicated to rituals for use as Binjeon, and was also a multipurpose building for copying portraits. In other words, Heungdeokjeon, along with Gyeongbokgung Taewonjeon, is the building that shows the changes in the operation of Binjeon in the late Joseon Dynasty. Characteristics are also confirmed in portrait-related rituals performed at Heungdeokjeon. The first is that Jakheonlye was practiced frequently in a short period of time. The second is that the ancestral rites of Sokjeolje and Bunhyang in Sakmangil, which are mainly held in the provincial Jinjeon, were identified. This is a very rare case in Jinjeon of the palace. The last is that Jeonbae, jeonal, and Bongsim were implemented mutiple times. In conclusion, Heungdeokjeon can be said to be a very symbolic building that shows the intention of Gojong, who valued imperial rituals, and the characteristics of the reconstruction process of Gyeongungung.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.42 no.5
• /
• pp.110-123
• /
• 2014

Recently, having neighborhood parks within walking distance has grown in importance. The purpose of this study is to analyze the effect of user satisfaction with neighborhood parks within walking distance considering interior and exterior environments. To do so, a field survey and GIS were conducted to construct data which were then compared with result of the analysed environment. Finally, amultiple regression analysis was conducted to confirm impact on user satisfaction of environment. By summarizing the study results, it was found that users of Hwarang Park exhibited a high level of satisfaction with 'park facilities' and 'safety of park use'. In the case of Gwanum Park, users exhibited a high level of satisfaction with 'green space' and 'amount of shade'. On the contrary, two park users exhibited low levels of satisfaction with 'facilities for children' and 'various attractions' within the parks. The pedestrian environment of Hwarang Park was rated higher than Gwanum Park within the park service area. User satisfaction was also rated higher than for Gwanum Park. However, two park users exhibited low levels of satisfaction with 'various attractions' within the pedestrian environment. From the result regression analysis of the total satisfaction factors, 'environment of access route', 'park facilities' and 'space for walking' positively influenced park use satisfaction. It was found that improvement of the pedestrian environment would be more effective than the improvement of the internal environment on Hwarang Park. This study investigated correlation with the access road environment as well as the interior environment of the parks. The results of this research will be used to improve accessibility and availability for neighborhood parks within walking distance.

• Korean small business review
• /
• v.41 no.4
• /
• pp.1-36
• /
• 2019

The purpose of this study is to identify the relationships among purposes and contents of smart factory building and continuous utilization of smart factory. Specifically, this study identifies two types of purposes of smart factory building as follows: (1) improving productivity, (2) increasing flexibility. In this study, three aspects of smart factory building contents were suggested like this: (1) automation area (facility automation vs. work automation), (2) big data system focus (radical transformation vs. incremental improvement), and (3) value chain integration area (internal value chain integration vs. external value chain integration). In addition, we looked at how firm size moderates the purposes - contents - continuous utilization of smart factory relationship. A questionnaire survey was conducted on 151 manufacturing companies. More specifically, out of 151 companies, 100 are small-and-medium-sized enterprises and 51 large-sized enterprises. All questionnaires were targeted at companies with Smart Factory level above level 2. The analysis results of this study using Smart PLS statistical programs are as follows. First, the purposes of smart factory building including increasing productivity and flexibility had positive impacts on all of the contents of smart factory building. Second, all of smart factory building contents had positive impacts on the continuous use of smart factory except big data system for incremental improvement of manufacturing process. Third, the impacts of smart factory building purposes implementation on smart factory building contents varied depending on whether the purpose is productivity improvement or flexibility. Fourth, it was founded that firm size moderated the relationships of purposes - contents - continuous utilization of smart factory in such a way that large-sized firms tend to empathize the link between flexibility and smart factory building contents for continuous use of smart factory, while small-and-medium-sized-firms emphasizing the link between productivity and smart factory building contents. Most of the previous studies have focused on presenting current smart factory deployment cases. However, it is believed that this research has made a theoretical contribution in this field in that it established and verified a research model for the smart factory building strategy. Based on the findings from a working-level perspective, corporate practitioners also need to have a different approach to smart factory building, which should be emphasized depending on whether their purpose of building smart factory is to increase productivity or flexibility. In particular, since the results of this study identify the moderating effect of firm size, it is deemed necessary for firms to implement a smart factory building strategy suitable for their firm size.

• Journal of Korean Society of Transportation
• /
• v.18 no.1
• /
• pp.75-85
• /
• 2000

In existing models in optimization, the crisp data improve has been used in the objective or constraints to derive the optimal solution, Besides, the subjective environments are eliminated because the complex and uncertain circumstances were regarded as Probable ambiguity, In other words those optimal solutions in the existing models could be the complete satisfactory solutions to the objective functions in the Process of application for industrial engineering methods to minimize risks of decision-making. As a result of those, decision-makers in location Problems couldn't face appropriately with the variation of demand as well as other variables and couldn't Provide the chance of wide selection because of the insufficient information. So under the circumstance. it has been to develop the model for the location and size decision problems of logistics facility in the use of the fuzzy theory in the intention of making the most reasonable decision in the Point of subjective view under ambiguous circumstances, in the foundation of the existing decision-making problems which must satisfy the constraints to optimize the objective function in strictly given conditions in this study. Introducing the Process used in this study after the establishment of a general mixed integer Programming(MIP) model based upon the result of existing studies to decide the location and size simultaneously, a fuzzy mixed integer Programming(FMIP) model has been developed in the use of fuzzy theory. And the general linear Programming software, LINDO 6.01 has been used to simulate, to evaluate the developed model with the examples and to judge of the appropriateness and adaptability of the model(FMIP) in the real world.