• Korean Journal of Adult Nursing
• /
• v.13 no.1
• /
• pp.53-69
• /
• 2001

As a nursing practice involves nurses'actions in a specific context of health care, this study has focused on exploring the espoused theories in nursing practice within the action science perspectives. Espoused theories are the belief, principles, and rationale expressed by the practitioner as guiding her/his actions in a situation of practice. The data were analysed qualitatively and 25 elements of espoused theories of nursing action were identified and clustered into 6 categories. The 25 elements of espoused theories are as follows: The clinical nurse worked in wholistic and individual nursing, focussed on the patient's needed, comfort and supportive nursing (5 theories of nursing goal); excellent skills, knowledge based, assessment and data collection, explaining, educating or a scientific basis(6 theories of nursing intervention): advocacy, value oriented, treatment, accountability and commitment(4 theories of nursing ethics); human respect, partnership, trust(3 theories of patient-nurse relationship) : knowledgable, accumulated clinical experiences and personally lived experiences, positive perspectives(4 theories of nurse), role of intervention, rewarding, peer relationship(3 theories of situations). The above mentioned espoused theories are similar to that of nursing textbooks which students learned through basic nursing education and almost the same as the Acts ofa Nurse in Korean. However, we are doubtful whether nurses actually do as they think. Therefore, it is recommended to review the theories-in-use in order to find any discrepancies between the espoused theories and the reality of nursing actions.

• Food Science of Animal Resources
• /
• v.27 no.1
• /
• pp.22-28
• /
• 2007

The purpose of this study was to investigate the effect of wheat fiber as a replacement for isolated soy protein (ISP) or concentrated soy protein (CSP) on the quality characteristics of meat batter. Meat batter formulations were prepared with 2% levels of ISP, CSP, or wheat fiber. The pH values of each formulation were not significantly different (p>0.05). The L-values of meat batter containing wheat fiber, ISP, or CSP were higher than the control, however the a- and b-values were lower than the control (p<0.05). Relative to the control meat batter, the water holding capacity, viscosity, hardness, gumminess, and chewiness of meat batter containing ISP, CSP, or wheat fiber was significantly higher than the control (p<0.05). All supplemented meat batters had significantly lower cooking loss and emulsification stability than the control (p<0.05), with no significant difference among the supplemented meat batters. The results of this study show that the use of wheat fiber as an ISP or CSP replacer does not affect the overall quality of meat batter.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.54 no.3
• /
• pp.265-269
• /
• 2009

Technology development for sufficient dry matter production of Chinese milk vetch (CMV) is most important in CMV-rice cultivation system in order to provide sufficient nutrients to rice plants. However, when the CMV plants are dominated by the weed, especially Alopecurus aequalis, the CMV growth could be reduced due to light and nutrient competition. In addition, A. aequalis is potential host of the rice dwarf virus disease. Therefore, control of A. aequalis is necessary to enhance the biomass production of CMV plants when CMV stands are insufficient. The use of chemical like sethoxydim (20%, ai) showed the highest control rate of 84% at early stage and was reduced as application was delayed. A. aequalis control did not change the CMV seedling stand before and after herbicide treatment and the reseeding stand in fall was rather increased 2.2 to 2.6 times. On the other hand, in untreated control, the CMV stand at May 15 and reseeding stand in fall was significantly reduced as compared with the before herbicide treatment. Control of A. aequalis increased the CMV dry matter production by 164% for 50% CMV coverage rate and 63% for 25% CMV coverage rate. This is equivalent to $12.3{\sim}16.4\;kgN$/10a which is greater than the recommended nitrogen rate of 9kg/10a. The result indicates that the control of A. aequalis is an efficient way to enhance dry matter production in CMV-rice cultivation system especially when CMV stand is poor.

• Reproductive and Developmental Biology
• /
• v.36 no.3
• /
• pp.213-217
• /
• 2012

The decreased fertility is frequently thought to be problem of cattle production. However, studies figure out that number of these problems is related to bull factors especially in artificial insemination setting. Therefore, this study was designed to investigate the fertility status of bull by their estimated relative conception rate of cows that were inseminated by frozen semen from Korean proven bulls. Here we use the non-return rate (NRR) to access the bull fertility whereas, the NRR was define as the proportion of bulls that semen were used to inseminate cows and the number of cows that did not return for another service within 60 days. The data from 54,388 artificial inseminations (AI) were analyzed from 88 KPN semen. The NRRs of highest and lowest fertile bull were 83.81 and 51.33%, respectively. And mean NRR was 68.27%. In comparison to previously reported study, our data shows 17.38% higher NRR and the absolute value of difference in 50%>NRR and 50%

• The International Journal of Costume Culture
• /
• v.4 no.1
• /
• pp.25-33
• /
• 2001

This study is to analyze Korean-Chinese women's Costume in Yabian with factors such as reform opening-up, economic growth, change of social values, development of technology, more education opportunities and influence of mass media. It divides the 1990's into two halves. Photos, interview, observation and relevant literature were used for this study. Even though economy grew rapidly, they needed to purchase daily goods other than clothes. In a way that they preferred practicality, it showed somewhat it was still developing. The trend in the first half of the 1990's was characterized : first, Synthetic or artificial fibers and ready-made suits were popular ; second, there still remained the men's style ; third, they wore Tanrikoo(彈力袴), Tisingkoo(體型袴), Jiaotakoo(脚袴) because of its properties of activeness and comfort ; fourth, shoulders looked ore prominent with pads as they were used in Chungsanfoo(中山服) ; fifth, clothes in grey and dark blue was in fashion ; sixth, they wore hand-made knit vests and sweaters and often mountain-climbing gears for its light and warm quality ; seventh, along with opening-up, various materials and colorful clothes were in style, which satisfied women's desire for beauty. They decorated Hanbok(韓服), using sleeves with colors, golden ornaments, flower patterns embroidery, materials of different color in collar and tie and dyes of sleeves and skirts. In the first half of the 1990's when the opening-up was beginning, there were diverse styles and colors in fashion, yet not close to good quality. As the economy grew, the second half of the 1990's was characterized by good palate, individuality, favouritism on foreign goods, rapid change of fashion. For instance, fur coat and woolen fabric were favored. Economic growth led to abundance of cloth, dyes and decorative materials. In addition, people possessed more clothing and it was possible for them to wear both Hanbok and wedding dress in wedding ceremony. People placed their standards on competency and financial ability rather than ideology. Worship disappeared and individuality arose. Therefore, apparel functioned not only as protection but as suits with aesthetic purpose. This resulted in introduction of bold style, imitation of western countries and extension of use of Hanbok. With the help of mass media, transportation, telecommunication, contact with Korean company and civilians, Korean and western cultures, through Korea, were accepted. Change in structure of economic status caused excessive spending and more educational opportunities that enabled people to accept foreign culture quickly. Values moved onto new, beautiful and better characteristics. it was possible to have suits ready-made due to improvement of mass production and cotten, wool, linen, silk became popular owing to technology. New technology, the bases of mass consumption, increased possession of clothing and accelerated change of fashion. In summary, women's Costume in Yanbian were affected by the factors in economy, politics, culture contact as well as change of society and technology.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2001.11a
• /
• pp.7-7
• /
• 2001

The increasing interest in light weight materials coupled to the need for cost -effective processing have combined to create a significant opportunity for aluminum P/M. particularly in the automotive industry in order to reduce fuel emissions and improve fuel economy at affordable prices. Additional potential markets for Al PIM parts include hand tools. Where moving parts against gravity represents a challenge; and office machinery, where reciprocating forces are important. Aluminum PIM adds light weight, high compressibility. low sintering temperatures. easy machinability and good corrosion resistance to all advantages of conventional iron bm;ed P/rv1. Current commercial alloys are pre-mixed of either the AI-Si-Mg or AL-Cu-Mg-Si type and contain 1.5% ethylene bis-stearamide as an internal lubricant. The powder is compacted in closed dies at pressure of 200-500Mpa and sintered in nitrogen at temperatures between $580~630^{\circ}C$ in continuous muffle furnace. For some applications no further processing is required. although most applications require one or more secondary operations such as sizing and finishing. These sccondary operations improve the dimension. properties or appearance of the finished part. Aluminum is often considered difficult to sinter because of the presence of a stable surface oxide film. Removal of the oxide in iron and copper based is usually achieved through the use of reducing atmospheres. such as hydrogen or dissociated ammonia. In aluminum. this occurs in the solid st,lte through the partial reduction of the aluminum by magncsium to form spinel. This exposcs the underlying metal and facilitates sintering. It has recently been shown that < 0.2% Mg is all that is required. It is noteworthy that most aluminum pre-mixes contain at least 0.5% Mg. The sintering of aluminum alloys can be further enhanced by selective microalloying. Just 100ppm pf tin chnnges the liquid phase sintering kinetics of the 2xxx alloys to produce a tensile strength of 375Mpa. an increilse of nearly 20% over the unmodified alloy. The ductility is unnffected. A similar but different effect occurs by the addition of 100 ppm of Pb to 7xxx alloys. The lend changes the wetting characteristics of the sintering liquid which serves to increase the tensile strength to 440 Mpa. a 40% increase over unmodified aIloys. Current research is predominantly aimed at the development of metal matrix composites. which have a high specific modulus. good wear resistance and a tailorable coefficient of thermal expnnsion. By controlling particle clustering and by engineering the ceramic/matrix interface in order to enhance sintering. very attractive properties can be achicved in the ns-sintered state. I\t an ils-sintered density ilpproaching 99%. these new experimental alloys hnve a modulus of 130 Gpa and an ultimate tensile strength of 212 Mpa in the T4 temper. In contest. unreinforcecl aluminum has a modulus of just 70 Gpa.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.8
• /
• pp.3945-3951
• /
• 2016

Background: Whether concurrent chemotherapy treatment is superior to radiotherapy alone as an adjuvant regimen for postoperative cervical carcinoma with risk factors remains controversial. Materials and Methods: A literature search strategy examined Pubmed, Embase, the Cochrane Library, the China National Knowledge Internet Web, the Chinese Biomedical Database and the Wanfang Database. Article reference lists and scientific meeting abstracts were also screened. Controlled trials comparing concurrent chemoradiotherapy versus radiotherapy alone in postoperative cervical cancer were included. The methodological quality of non-randomized controlled trials was evaluated using the Newcastle-Ottawa Scale. Randomized controlled studies were evaluated with the Cochrane handbook. A meta-analysis was performed with RevMan 5.3. Results: A total of 1,073 patients from 11 clinical trials were analysed, with 582 patients in the concurrent chemoradiotherapy group and 491 patients in the radiotherapy group. Hazard ratios (HR) of 0.47 (95% CI 0.31-0.72) and 0.50 (95% CI 0.35-0.72) were observed for overall survival and progression-free survival, indicating a benefit from the additional use of concurrent chemotherapy. Subgroup analyses demonstrated that cervical cancer with high risk factors significantly benefitted from concurrent chemotherapy when examining overall survival (HR 0.44, 95% CI 0.28-0.67) and progression-free survival (HR 0.48, 95% CI 0.33-0.70), but patients with intermediate risk factors showed no benefit from concurrent chemotherapy in overall survival (HR 1.72, 95% CI 0.28-10.41) and progression-free survival (HR 1.09, 95% CI 0.19-6.14). No significant differences were observed for grade 3-4 anaemia (risk ratio (RR) 3.87, 95% CI 0.69-21.84), grade 3-4 thrombocytopenia (RR 3.04, 95% CI 0.88-10.58), grade 3-4 vomiting or nausea (RR 1.71, 95% CI 0.27-10.96), or grade 3-4 diarrhoea (RR 1.40, 95% CI 0.69-2.83). Significant differences were observed for grade 3-4 neutropenia in favour of the radiotherapy group (RR 7.23, 95% CI 3.94-13.26). Conclusions: In conclusion, concurrent chemoradiotherapy improves survival in postoperative cervical cancer with high risk factors but not in those with intermediate risk factors.

• The Journal of Korean Medicine
• /
• v.33 no.4
• /
• pp.60-68
• /
• 2012

Objectives: By grasping trends in research, technology, and general characteristics of learning support tools, this study was conducted to present a model for research on Korean Medicine (KM) to make use of information technology to support teaching and learning. The purpose is to improve the future clinical competence of medical personnel, which is directly linked to national health. Methods: With papers and patents published up to 2011 as the objects, 438 papers were extracted from "Web of Science" and 313 patents were extracted from the WIPS database (DB). Descriptive analysis and network analysis were conducted on the annual developments, academic journals, and research fields of the papers, patents searched were subjected to quantitative analysis per application year, nation, and technology, and an activity index (AI) was calculated. Results: First, research on medical learning support tools has continued to increase and is active in the fields of computer engineering, education research, and surgery. Second, the largest number of patent applications on medical learning support tools were made in the United States, South Korea, and Japan in this order, and the securement of remediation technology-centered patents, rather than basic/essential patents, seemed possible. Third, when the results of the analysis of research trends were comprehensively analyzed, international research on e-PBL- and medical simulation-centered medical learning support tools was seen to expand continuously to improve the clinical competence of medical personnel, which is directly linked to national health. Conclusions: The KM learning support tool model proposed in the present study is expected to be applicable to computer-based tests at KM schools and to be able to replace certain functions of national KM doctor license examinations once its problem DB, e-PBL, and TKM simulator have been constructed. This learning support tool will undergo a standardization process in the future.

• The Korea Journal of Herbology
• /
• v.36 no.5
• /
• pp.101-108
• /
• 2021

Objectives : A root of Dipsacus asperoides C. Y. Cheng et T. M. Ai (D. asperoides) has been traditionally used as a medicinal resource in several Asian countries, including Korean and traditional Chinese medicine that has been traditionally used for treating several medical conditions including pain, arthritis, and bone fractures in Korea. In the present study, we investigated potential subacute toxicities of D. asperoides extract. Methods : C57BL/6 mice (male, 7weeks) were randomly divided into 4 groups of 5 mice. Except for the control group, the mice were orally administrated D. asperoides extract at doses of 50, 150, or 450 mg/kg/day for 2 weeks. At the end of the treatment period, all mice were euthanized, and the following parameters were examined: mortality, body weight, clinical signs, gross findings, hematology, serum biochemistry, organ weight, and histopathology. Results : There were no abnormalities in mortality, clinical signs, body weight, gross findings, or organ weight after repeated administration of D. asperoides extract for 2 weeks, compared with the control group. In addition, there were no significant changes in hematological, serum biochemical, and histopathological parameters between the control group and D. asperoides extract administrated groups with doses of up to 450 mg/kg/day. Conclusion : In this study, D. asperoides extract showed no significant toxicities at a dose of up to 450 mg/kg/day in mice. Although we could not confirm the toxic dose of D. asperoides extract, it can be considered safe for further pharmacological use.

• Journal of the Korea Concrete Institute
• /
• v.22 no.1
• /
• pp.19-27
• /
• 2010

Aging and severe environments are major causes of damage in reinforced concrete (RC) structures such as buildings and bridges. Deterioration such as concrete cracks, corrosion of steel, and deformation of structural members can significantly degrade the structural performance and safety. Therefore, effective and easy-to-use methods are desired for repairing and strengthening such concrete structures. Various methods for strengthening and rehabilitation of RC structures have been developed in the past several decades. Recently, FRP composite materials have emerged as a cost-effective alternative to the conventional materials for repairing, strengthening, and retrofitting deteriorating/deficient concrete structures, by externally bonding FRP laminates to concrete structural members. The main purpose of this study is to investigate the effectiveness of adaptive neuro-fuzzy inference system (ANFIS) in predicting behavior of circular type concrete column retrofitted with FRP. To construct training and testing dataset, experiment results for the specimens which have different retrofit profile are used. Retrofit ratio, strength of existing concrete, thickness, number of layer, stiffness, ultimate strength of fiber and size of specimens are selected as input parameters to predict strength, strain, and stiffness of post-yielding modulus. These proposed ANFIS models show reliable increased accuracy in predicting constitutive properties of concrete retrofitted by FRP, compared to the constitutive models suggested by other researchers.