• 한국응용과학기술학회지
• /
• 제34권3호
• /
• pp.595-601
• /
• 2017

In vivo assay of glucose detection was described using a skin tattoo film electrode (STF), and the probe was made from carbon nano tube paste modification film paper. Here in the square-wave stripping anodic working range obtained of $20-100mgL^{-1}$ within an accumulation time of 0 seconds only in sea water electrolyte solutions of pH 7.0. The relative standard deviations of 50 mg glucose that were observed of 0.14 % (n=12), respectively, using optimum stripping accumulation of 30 sec, the low detection limit (S/N) was pegged at 15.8 mg/L. The developed results can be applied to the detect of in vivo skin sensing in real time. Which confirms the results are usable for in vitro or vivo diagnostic clinical analysis.

• 대한화학회지
• /
• 제4권1호
• /
• pp.62-66
• /
• 1957

With the intention of preparing cation exchangers from the domestic coals, and using these for softening hard water and some other purposes, seven kinds of raw coal were tested and the results are as follows. 1) The following conditions of preparation were given the good results. Reaction time 5 hours Reaction temperature $95^{\circ}$ Concentration of sulfuric acid 98% Amount of sulfuric acid 10 times to the sample (as weight) 2) The raw coals which is rich in fixed carbon and have the fuel ratio 0.8 to 1.0 were suitable, and Kampo lignite has shown the best results. 3) The cation exchangers from coals were able to exchange the cation, both hydrogen and sodium type dynamically and statically, like the synthetic ion exchange resin. The exchange capacities were as follows. Total capacity 1.60 meq/g. Breakthrough capacity 1.30 meq/g. Usable breakthrough capacity 1.20 meq/g National Central Research laboratory

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 춘계 학술발표회
• /
• pp.1-10
• /
• 2009

Based on recent studies, the side resistance of rock socketed drilled shafts was affected by unconfined compressive strength of rock, socket roughness, rock types and joints, and initial normal stress. Especially, the socket roughness was affected by rock types and joints, drilling methods, and diameters of pile. In this study, a new roughness measurement system (BKS-LRPS, Backyoung-KyungSung Laser Roughness Profiling System) usable in water was developed. Based on the laboratory model tests, an EMD (Effective Measurement Distances) according to various turbidity was proposed as EMD=$1149.2{\times}T^{-0.64}_b$.

• 설비공학논문집
• /
• 제14권10호
• /
• pp.811-816
• /
• 2002

Waste heat exhausted from seven types of the domestic industry was surveyed, which include food, fibre, paper & wood, chemical, ceramics, metalworking and others. The databases of waste heat for each industry were made by using ACCESS software of Microsoft, and data were analyzed to get correlation between waste heat and purchase energy. The volume of usable waste heat is estimated to be 9,169,000 TOE in the year of 2000, when the minimum available temperature is set as $100^{\circ}C$ for waste gas, $30^{\circ}C$ for hot water and $100^{\circ}C$ for steam considering the condition of waste heat exhausting facilities and surroundings. This volume of waste heat is approximately 11.9 percent of the purchase energy of the domestic industry.

• 한국지열·수열에너지학회논문집
• /
• 제14권4호
• /
• pp.61-67
• /
• 2018

Solar energy depends on the altitude and azimuth of the sun, and the amount of energy collected on the slope depends on the latitude of the area being installed. However, since most solar heating systems are fixed to the ground, it is necessary to analyze the optimal installation angle from the early design stage. However, problems arise when energy consumption is not considered together because heating systems are not used in the summer In this study, the optimum installation angles of the solar collectors according to the latitude of the installation area are not simply determined by the amount of energy collected, but because the system is overheated due to climate change or energy usage patterns, And the amount of additional energy input.

• 한국수산과학회지
• /
• 제44권5호
• /
• pp.543-549
• /
• 2011

An underwater speaker was developed for use as an acoustic deterrent device that transmits acoustic energy through the water omnidirectionally over a broadband frequency range to eliminate marine mammal attacks and to prevent physical damage to the inshore and coastal fishing grounds of Korea. The underwater speaker was constructed of two vibration caps machined from 6061-T6 aluminum alloy and a stack of PZ 26 piezoelectric ceramic rings (Ferroperm Piezoceramics A/S) connected mechanically in series and electrically in parallel. The performance characteristics of the underwater speaker were measured and analyzed in an experimental water tank of $5\;m{\times}5\;m{\times}6\;m$. The peak transmitting voltage response (TVR) was measured at 11.16 kHz with 163.45 dB re $1\;{\mu}Pa$/V at 1m. The underwater speaker showed a near omnidirectional beam pattern at the peak TVR resonance frequency. The usable frequency range was 4-25 kHz with a lower TVR limit of approximately 140 dB. We conclude that this underwater speaker could be satisfactorily used as an acoustic deterrent device against marine mammals, particularly the bottlenose dolphin, to protect catches and fishing grounds as well as the mammals themselves, for example, by keeping them away from fishing gear and/or vessels.

• 한국환경과학회지
• /
• 제26권7호
• /
• pp.817-826
• /
• 2017

We analyzed how foraging area use changed in female Pipistrellus abramus during the breeding season. Radio tracking was used to follow 12 female P. abramus in Gyeongju City, from 2013 to 2015. We followed three bats in each of four stages of reproduction: early pregnancy, late pregnancy, lactation, and post-lactation. Our data showed that the usable area of a foraging site and the area that was actually used by bats in that site were different, and foraging site use also differed according to stage of reproduction. The bats used arable land the most, with use rates of 57%, 40.4%, and 73.2% during early pregnancy, late pregnancy, and lactation, respectively. Bats in a post-lactation state did not use arable areas at all and instead foraged over bodies of water 90% of the time. There was no difference in the use of each foraging environment between bats in early pregnancy and late pregnancy. However, bats in late pregnancy and those that were lactating did use arable land to different extents, and bats that were lactating and those that were post-lactation also used arable land and bodies of water to different extents.

• 대한토목학회논문집
• /
• 제7권4호
• /
• pp.61-71
• /
• 1987

콘크리트의 품질판정기준(品質判定基準)은 재령(材令) 28일(日)의 압축강도(壓縮强度)이지만, 실질적인 품질관리(品質管理)를 위해서는 조기(早期)에 강도(强度)를 파악해야 한다. 콘크리트 강도(强度)를 조기판정(早期判定)하는 방법은 크게 "강도촉진법(强度促進法)"과 굳지 않은 콘크리트의 "분석법(分析法)"이 있으나, 본(本) 연구(硏究)에서는 $70^{\circ}C$의 열수양생법(熱水養生法)으로 다양한 양생방법을 시도하여 기존의 외국기준(外國規準)보다 개선된 방법을 제시하였다. 실험자료의 분석(分析)에 있어서는 각 강도의 변동을 검토함은 물론, 합리적인 추정식(推定式)을 제안하기 위하여 각 강도의 분포(分布)를 고려하고 확률적(確率的) 관계(關係) 및 품질기준(品質基準)의 적합성(適合性)을 검토하였다. 실험결과 촉진강도(促進强度)의 변동은 비교적 작게 나타났으며, 본 연구에서 제안한 대부분의 방법이 좋은 상관성(相關性)을 가지고 있어 유용한 조기판정방법(早期判定方法)으로 판명되었다.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2010년도 학술발표회
• /
• pp.551-555
• /
• 2010

수생 생태계에서 하천 어류 서식 환경을 보호하고 유지하기 위해서는 어류의 적절한 서식 공간 확보가 선행되어야 하며, 하천정비사업에 따른 준설 시 하상변동으로 및 유속 변화로 인하여 발생하는 다양한 영향을 충분히 검토해야 한다. 본 연구에서는 우선 교각의 설치와 합류부위치로 인해 발생하는 모의 영역 내의 2차원 흐름거동을 RMA-2 모형으로 분석하였다. 또한 어류의 미시서식처를 고려한 최적의 영역에 대한 면적을 산정하였다. 이를 위해서 2차원 물리 서식처 모의 모형인 River2D를 적용하여 가중가용면적-유량 관계 곡선의 도출을 통해서 최적유량 산정시 중요한 지표인 WUA (Weighted Usable Area)의 산정결과를 어종별, 지역별 그리고 정비사업 전후에 대한 비교하였다. 적용구간은 낙동강 살리기 사업의 25공구(칠곡2, 구미 1지구: 약 8.74 km) 전체를 대상으로 하며 그중에서도 지류 합류부인 경암천부근 (제1지역)과 교각부근(제2지역)에서의 분석을 실시하였다. 피라미에 대한 WUA 값 산정결과 하천정비후에 정량적인 개선 효과를 확인하였으나 안정적인 수심 및 유속분포 지역의 개선을 위한 설계검토가 필요하다 할 수 있다.

• 한국세라믹학회지
• /
• 제51권6호
• /
• pp.570-574
• /
• 2014

Magnetic-graphene nanosheets have been synthesized via a simple effective chemical precipitation method followed by heat treatment. The composite nanosheets are super paramagnetic at room temperature and can be separated by an external magnetic field. The prepared magnetic-graphene nanosheets were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Raman spectroscopy, and BET surface area analysis. The results demonstrated the successful attachment of iron oxide nanoparticles to graphene nanosheets. It was found that the attached nanoparticles were mainly $Fe_3O_4$. The magnetic-graphene nanosheets showed near complete methyl orange removal within 10 mintues and would be practically usable for methyl orange separation from water.