• Title/Summary/Keyword: Urgency level

Search Result 66, Processing Time 0.023 seconds

TPC Algorithm for Fault Diagnosis of CAN-Based Multiple Sensor Network System (CAN 기반 다중센서 네트워크 시스템의 고장진단을 위한 TPC알고리즘)

  • Ha, Hwimyeong;Hwang, Yuseop;Jung, Kyungsuk;Kim, Hyunjun;Lee, Bongjin;Lee, Jangmyung
    • Journal of Institute of Control, Robotics and Systems
    • /
    • v.22 no.2
    • /
    • pp.147-152
    • /
    • 2016
  • This paper proposes a new TPC (Transmission Priority Change) algorithm which is used to diagnose failures of a CAN (Controller Area Network) based network system for the oil tank monitoring. The TPC algorithm is aimed to increase the total amount of data transmission and to minimize the latency for an urgent message by changing transmission priority. The urgency of the data transmission has been determined by the conditions of sensors. There are multiple sensors inside of the oil tank, such as temperature, valve, pressure and level sensors. When the sensors operate normally, the sensory data can be collected through the CAN network by the monitoring system. However when there is a dangerous situation or failure situation happened at a sensor, the data need to be handled quickly by the monitoring system, which is implemented by using the TPC algorithm. The effectiveness of the TPC algorithm has been verified by the real experiments. In addition, this paper introduces a method that people can figure out the condition of oil tanks and also can perform the fault diagnosis in real-time by using transmitted packet data. By applying this TPC algorithm to various industries, the convenience and reliability of multiple sensors network system can be improved.

Principal Conclusions of Timber Consumption Survey (목재(木材) 소비량(消費量) 조사(調査))

  • Shim, Chong-Supp;Lee, Yong-Dae
    • Journal of the Korean Wood Science and Technology
    • /
    • v.10 no.3
    • /
    • pp.194-195
    • /
    • 1982
  • Recommendaton: These are the highlights of the findings of the Timber Consumption Survey carried out by the Project in 1966, and covering consumption for the period from 1961 to 1965. The survey was oriented towards consumption for structural, commercial and industrial purposes and existing estimates for local (village-level) consumption as fuel and the like were adopted. A full report on the survey was submitted to the Bureau of Forestry in 1966. Long-term Trends: After allowance for anticipated population increase, this ten year's increase in industrial wood consumption represents a gain of about 30% in per capita consumption (from 0.0913 cu.m. per capita to 0.118 cu.m. per capita). This is only about half the expected general economic growth of about 75% (7% per annum). It is therefore likely (a) that the 1975 estimate is conservative, (b) that the consumption demand beyond 1975 may be expected to build up at a greatly increased rate. Estimated income elasticity coefficients are high, and with expected ir,creases in prosperity and population, the consumption is expected to rise to 10 million cu. meters by the year 2,000. Consumption Pattern: The breakdown of industrial consumption (1965) is given in Table 4-2, showing sawnwood consumption as the most important in 1965. The upward trend in all sectors over the 1961-65 period is expected to continue. The general consumption pattern is expected to change through 1975 with a sharp increase in the relative importance of pulp products (to 30% of total consumption) offset by declining relative importance of sawlogs. The following recommendations follow from the study: (i) Industrial forests. - A programme of establishment of consolidated industrial forests should be initiated as a matter of urgency. (ii) Fuelwood forests - Properly sited, protected and managed fuelwood forest, worked on a 20-year rotation, should be established as a nation wide basis. (iii) Hardwood utilization - Detailed investigations are required into the use of indigenous hardwoods for the pulp, particle board and hardboard industries. (iv) Mining timber - Preservation treatment of all mining timber should be enforced by law. (v) Sawmills - Licencing restrictions should be enforced to reduce the number of small, inefficient sawmills. b. Extension work should be undertaken bv government to improve sawmilling practices.

  • PDF

Variations in the Hospital Standardized Mortality Ratios in Korea

  • Lee, Eun-Jung;Hwang, Soo-Hee;Lee, Jung-A;Kim, Yoon
    • Journal of Preventive Medicine and Public Health
    • /
    • v.47 no.4
    • /
    • pp.206-215
    • /
    • 2014
  • Objectives: The hospital standardized mortality ratio (HSMR) has been widely used because it allows for robust risk adjustment using administrative data and is important for improving the quality of patient care. Methods: All inpatients discharged from hospitals with more than 700 beds (66 hospitals) in 2008 were eligible for inclusion. Using the claims data, 29 most responsible diagnosis (MRDx), accounting for 80% of all inpatient deaths among these hospitals, were identified, and inpatients with those MRDx were selected. The final study population included 703 571 inpatients including 27 718 (3.9% of all inpatients) in-hospital deaths. Using logistic regression, risk-adjusted models for predicting in-hospital mortality were created for each MRDx. The HSMR of individual hospitals was calculated for each MRDx using the model coefficients. The models included age, gender, income level, urgency of admission, diagnosis codes, disease-specific risk factors, and comorbidities. The Elixhauser comorbidity index was used to adjust for comorbidities. Results: For 26 out of 29 MRDx, the c-statistics of these mortality prediction models were higher than 0.8 indicating excellent discriminative power. The HSMR greatly varied across hospitals and disease groups. The academic status of the hospital was the only factor significantly associated with the HSMR. Conclusions: We found a large variation in HSMR among hospitals; therefore, efforts to reduce these variations including continuous monitoring and regular disclosure of the HSMR are required.

Current Status and Improvement of the Fisheries Supply and Demand Statistics (수산물 수급통계 실태 및 개선과제)

  • Lee, Heon-Dong;Kim, Dae-Young
    • The Journal of Fisheries Business Administration
    • /
    • v.48 no.2
    • /
    • pp.19-32
    • /
    • 2017
  • The purpose of this study is to identify problems and suggest improvements of estimating procedures and item of fisheries supply-demand statistics served as a basis for the fisheries supply-demand policies. Korea Rural Economic Institute(KREI) and Ministry of Oceans and Fisheries(MOF) respectively publish the fisheries supply-demand statistics. But the reliability of data is low as the statistics of these two organizations are limited and show discrepancy in the numbers. It is therefore difficult to use them as the basic data for policies. Also, an accurate data aggregation is difficult due to following problems in the items of statistics. 1) Problems in estimating route sales and non-route sales of production, 2) adequacy of fishery product yield rate compared to raw material in the fisheries import/export sector, 3) selection of target companies for understand stocks and survey scope of fish species, 4) applying'0'to non-edible product demand etc. In order to develop the fisheries industry as a future growth industry, it is necessary to establish the accurate fisheries supply-demand policy as the instability of fisheries supply and demand is increasing. To do this, statistical reliability has to be improved. The improvements proposed in this study should be implemented considering urgency. First of all, an exhaustive analysis of stock statistics and conversion rates of raw material yield in the fisheries import/export sector should be conducted. In the medium term and the long term, transferring production statistics to MOF and surveys on the use demand of non-food product and the level of reduced and discarded seafood products should be carried out in consecutive order.

Soil Environmental Policy in Netherlands (네덜란드의 토양환경정책)

  • 송창수
    • Journal of Korea Soil Environment Society
    • /
    • v.2 no.2
    • /
    • pp.3-8
    • /
    • 1997
  • The basic aim of the current policy is to achieve and preserve a sustainable soil quality. This means that soil must retain all its functions for years to come. The Soil Protection Act lays down a statutory "duty of care", which means that soil contamination occurring during certain activities must be cleaned up by the person who cause it. The Soil Cleanup (Interim Measures) Act(1983) was repeated on 15 May 1994, and its provisions, together with some ammendments and additions, were assimilated into the Soil Protection Act. These cleanup regulations are intended to deal with "old cases" of soil contamination, i.e. cases that came to light before 1 January 1987, when the Soil Protection Act entered into force. The urgency for cleanups is dependent upon the actual exposure. In most cases actual exposure win be less than potential exposure (underlying C-values) because only a few exposure routes are present. Cleanup of sites where exposure exceeds maximum tolerable risk levels are considered urgent, and the actual risk level is used to prioritize the cleanup.oritize the cleanup.

  • PDF

Study on Firefighting Education and Training Applying Virtual Reality (가상현실을 적용한 소방교육·훈련에 관한 연구)

  • Chae, Jin
    • Fire Science and Engineering
    • /
    • v.32 no.1
    • /
    • pp.108-115
    • /
    • 2018
  • The purpose of this study was to classify VR programs according to their characteristics and associations by the disaster management phase and firefighting school curriculum, and set priorities among VR fire training and training programs using AHP analysis., The relative priority is given considering its importance and urgency. As a result of the study, firefighting education and training classes showed the highest level of response. The relative priority of the subcategories was highest in the prevention stage. The simulation implementation for the evacuation experience was highest in closed spaces, such as a subway, and the simulation for the special firefighting vehicle was highest in the contrast phase. In the response phase, real fire simulation training was the highest. In the recovery phase, virtual reality training was the most effective in determining the fire situation based on the fire database.

A Study on difficulties and support measures of FTA utilization in Korean Trading Firms (무역기업의 FTA 활용 애로사항 및 지원방안에 대한 연구)

  • Chung, Jason;Jeong, Yoon Say
    • International Commerce and Information Review
    • /
    • v.15 no.4
    • /
    • pp.171-192
    • /
    • 2013
  • The FTA utilization rate in Korea current, compared with the developed countries, utilization rate is low overall. In particular, in the case of Korea-ASEAN FTA, etc. remain at 30% level, improvement of FTA utilization has emerged as a matter of urgency. In addition, the proportion receiving the FTA preferential tariff trade companies have also been assessed as weak, improve the utilization ratio is in the policy issue of maximum. In this study, in order to increase the utilization of FTA trading enterprises, and analyzes were performed in reality. And to understand the FTA bottleneck matters of trade enterprises, and was also studied improvement plan consulting and education FTA utilization of trading partners. This has a purpose to provide data useful measures making to improve the utilization of FTA government. It is expected that the contribution of export expansion trade companies that take advantage of the FTA as a result of this study, enhancement of FTA policy, to strengthen the support base of FTA policy.

  • PDF

A study on the effect of information types on Drivers in Takeover period of automated vehicles (자율주행 자동차의 제어권 전환 상황에서 요구되는 정보 유형에 관한 연구)

  • Kim, Naeun;Yang, Min-young;Lee, Jiin;Kim, Jinwoo
    • Journal of Digital Contents Society
    • /
    • v.19 no.1
    • /
    • pp.113-122
    • /
    • 2018
  • In level 3 automated vehicles, drivers are expected to encounter transition of control when the system reaches its limit. Drivers need to refocus their attention on the road ahead and gain situational awareness. Appropriate information should be conveyed during this period in order to prevent human errors. In this paper, we defined the takeover process as 'in-the-middle-of-the-loop' and conducted Task Analysis and Work Domain Analysis to find out information requirements. As a result, we specified required information types and interface considerations. Moreover, we conducted an experimental study to find how the information types affect drivers on situation awareness, cognitive load and reaction time. Consequently, we found different information on system transparency should be conveyed depending on the urgency of takeover situation and driver guidance could help drivers with better situation awareness after the takeover.

A Study on Strategic Factors for the Application of Digitalized Korean Human Dataset (한국인의 인체정보 활용을 위한 전략적 요인에 관한 연구)

  • Park, Dong-Jin;Lee, Sang-Tae;Lee, Sang-Ho;Lee, Seung-Bok;Shin, Dong-Sun
    • Journal of Digital Convergence
    • /
    • v.8 no.2
    • /
    • pp.203-216
    • /
    • 2010
  • This study corresponds to an exploratory survey that identifies and organizes important decision factors for establishing R&D strategic portfolio in the application of digitalized Korean human-dataset. In the case of countries that have performed the above, the digitalized human-dataset and its visualization application development research are regarded as strategic R&D projects selected and supervised in national level. To achieve the goal of this study, we organize a professional group that reviews articles, suggests research topics, considers alternatives and answers questionnaires. With this study, we draw and refine the detailed factors; these are reflected during a strategic planning phase that includes R&D vision setting, SWOT analysis and strategy development, research area and project selection. In addition to this contribution for supporting the strategic planning, the study also shows the detailed research area's definition/scope and their priorities in terms of importance and urgency. This addition will act as a guideline for investigating further research and as a framework for assessing the current status of research investment.

  • PDF

Systematic review on urination and defecation-related pathophysiological symptoms of each Sasang types (사상 체질별 대소변 소증에 대한 체계적 고찰 연구)

  • PARK, Yu-Gyeong;HAN, Sang Yun;CHAE, Han;BAE, Nayoung
    • Journal of Sasang Constitutional Medicine
    • /
    • v.30 no.3
    • /
    • pp.24-39
    • /
    • 2018
  • Introduction The purpose of this study was to systematically review previous studies on Sasang type-specific pathophysiological symptoms in urination and defecation. Methods Peer-reviewed articles on type-specific pathophysiological symptoms of urination and defecation published until September 2016 were extracted from domestic and international six databases. Clinical characteristics from thirteen extracted articles were categorized into three urination domains of appearance of urine, capacity of bladder and urinary discomfort, and three defecation domains of irritability of bowel movement, functional constipation and discomfort from irregularity. Results As for the urination, Tae-Eum type showed dark color with foam, however So-Eum type had frequent urination and sensitivity to dysuria but no nocturia and residual urine sense. As for the defecation, So-Yang type showed frequent urgency and constipation, however So-Eum type reported loose stool. So-Yang type showed varied level of health status depending on defecation irregularity. There were disparities with rectal tenesmus among Sasang types. Discussion Six domains of urination and defecation related type-specific pathophysiological clinical symptoms were provided in this study. This study would contribute to the standardized clinical measures of Sasang typology in the near future.