• 한국산학기술학회논문지
• /
• 제9권3호
• /
• pp.611-614
• /
• 2008

Urea=SCR 시스템은 질소산화물을 감소하기 위한 효과적인 후처리장치 중의 하나로 알려져 있다. SCR 시스템의 성능을 향상시키기 위해서 우레아 분사시스템을 위한 최적의 기하학적인 조건이 형성되어야한다. 본 연구는 대형 디젤기관에서 우레아를 사용한 SCR시스템의 분무 특성을 가시화 하고자 했다. 실험은 우레아 압력과 우레아 유량 그리고 공기압력과 공기량을 변화시킴으로써 이루어졌다. 가시화는 초고속 카메라를 이용하여 촬영하였다.

• 한국자동차공학회논문집
• /
• 제13권5호
• /
• pp.57-63
• /
• 2005

The effects of an urea injection at the exhaust pipe for a 4-cylinder DI(Direct Injection) diesel engine were investigated with the parameters such as urea-SCR(Selective Catalytic Reduction) and EGR system. The urea quantity was controlled by NOx quantity and MAF(Manifold Air Flow). The urea injection quantity can be controlled with the urea syringe pump, precisely. The effects of NOx reduction for the urea-SCR system were investigated with and without ECR engine, respectively. It was concluded that the SUF(Stoichiometric Urea Flow) is calculated and the NOx results are visualized with engine speed and load. Furthermore, the NOx map is made from this experimental results. It was suggested, therefore, that NOx reduction effects of the urea-SCR system without the EGR engine were better than that with the EGR engine except of low load and low speed.

• 한국자동차공학회논문집
• /
• 제16권4호
• /
• pp.165-172
• /
• 2008

Urea-SCR, the selective catalytic reduction using urea as reducing agent, has been investigated for about 10 years in detail and today is a well established technique for deNOx of stationary diesel engines. In the case of the SCR-catalyst a non-uniform velocity and $NH_3$ profile will cause an inhomogeneous conversion of the reducing agent $NH_3$, resulting in a local breakthrough of $NH_3$ or increasing NOx emissions. Therefore, this work investigates the effect of flow and $NH_3$ non-uniformities on the deNOx performance and $NH_3$ slip in a Urea-SCR exhaust system. From the results of this study, it is found that flow and $NH_3$ distribution within SCR monolith is strongly related with deNOx performance of SCR catalyst. It is also found that multi-hole injector shows better $NH_3$ uniformity at the face of SCR monolith face than one hole injector.

• Journal of Advanced Marine Engineering and Technology
• /
• 제32권3호
• /
• pp.394-403
• /
• 2008

The effects of water injection (WI) and urea injection for NOx on a 4-cylinder Direct Injection (DI) diesel engine were investigated experimentally. For water injection, it was installed at the intake pipe and the water quantity was controlled at the intake manifold and Manifold Air Flow (MAF) temperatures while the urea injection was located at the exhaust pipe and the urea quantity was controlled by NOx quantity and MAF. The effects of WI system, urea-SCR system and the combined system were investigated with and without exhaust gas recirculation (EGR). Several experiments were performed to characterize the urea-SCR system, using engine operating points of varying raw NOx emissions. The results of the Stoichiometric Urea Flow (SUF) and NOx map were obtained. In addition, NOx results were illustrated according to the engine speed and load. It is concluded that the NOx reduction effects of the combined system without the EGR were better than those with the EGR-based engine.

• 한국정밀공학회지
• /
• 제25권11호
• /
• pp.83-89
• /
• 2008

The Effect of Space Velocity(SV) on NOx conversion rate was performed to develop NOx reduction after-treatment system. SV is calculated from engine exhaust gas volume and SCR catalyst volume. Found the Urea injection duty of maximum efficiency for NOx conversion if increase SV, NOx Conversion rate is down. Especially, when SV is more than $110,000h^{-1}$, NOx conversion rate decrease suddenly. Same case, if SV is lower than $40,000h^{-1}$, NOx conversion rate is down. Also, the characterization of Urea-SCR system was performed. Three candidate injectors for injecting Urea were tested in terms of 속 injection rate and NOx reduction rate. The performances of SCR catalytic converter on temperature were investigated. The performance of Urea-SCR system was estimated in the NEDC test cycle with and without EGR. It was found that nozzle type injector had high NOx conversion rate. SCR catalytic converter had the highest efficiency at the temperature of $350^{\circ}C$. EGR+Urea-SCR system achieved NOx reduction efficiency of 73% through the NEDC test cycle.

• 대한기계학회논문집B
• /
• 제41권4호
• /
• pp.269-275
• /
• 2017

LNT(Lean $NO_X$ Trap), LNC(Lean $NO_X$ Catalyst), SCR(Selective Catalytic Reduction)과 같은 $NO_X$ 저감기술은 상용차뿐만이 아닌 승용차량 성능향상을 위해 지속적으로 개발이 진행되고 있다. 특히 Urea-SCR 시스템은 연료손실 없이 이론상 100%에 가깝게 $NO_X$를 저감하는 가장 효과적인 기술로 환원반응으로 배기가스를 $N_2$와 $H_2O$로 배출하기 위해 환원제인 요소수를 분사해야한다. 하지만 엔진에서와는 달리 실제차량에서의 적용은 SCR 효율이 떨어지게 된다. 따라서 실제차량에서의 SCR 효율을 극대화하는 기술 개발이 요구되고 있는 실정이다. 본 연구에서는, Post EURO-6 배기가스 규제에 대응하기 위한 디젤승용차량에서의 Urea-SCR의 $NO_X$ 저감 성능에 의한 저감효율의 극대화를 목적으로 실차용 Urea-SCR 시스템 위한 기초자료로 제시하고자 한다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제31권3호
• /
• pp.235-242
• /
• 2007

This paper discusses dynamic characteristics of a urea-SCR (Selective Catalytic Reduction) system. The urea flow rate to improve NOx conversion efficiency is generally determined by parameters such as catalyst temperature and space velocity. The urea-SCR system was tested in the various engine operating conditions governing the raw NOx emission levels, space velocity. and SCR catalyst temperature. These experiments include cold-transients to determine catalyst light-off temperature and urea flow rate transients. Likewise. ammonia storage dynamics was also investigated. The cold-transient results indicate the light-off temperature of the catalysts used in these experiments was $200-220^{\circ}C$. The ammonia storage and urea flow rate transients all indicate very slow dynamics (on the order of seconds) which presents control challenges for mobile applications. The results presented in this paper should provide an excellent starting point in developing a functional in-vehicle urea-SCR system.

• 에너지공학
• /
• 제24권4호
• /
• pp.24-32
• /
• 2015

국내외적으로 디젤엔진에 대한 배출가스 규제가 강화되고 있고 다양한 방식의 엔진연소 및 후처리 시스템에 대한 연구가 진행되고 있다. 질소산화물(NOx)의 제거방법으로는 HC-SCR, LNT, Urea-SCR 등이 있으며, Urea-SCR은 높은 변환 효율 및 연비특성으로 향후 NOx의 저감을 위한 유력한 기술로 많은 기술개발이 진행되고 있다. 본 연구에서는 요소함량의 변화에 따른 요소수의 물리적/화학적 특성을 조사하고 배출가스의 특성을 분석하였다. 요소함량의 증가에 따른 요소수의 뷰렛, 알데히드, 인산염 함량은 증가하였으며, 배출가스 중 일산화탄소(CO), 탄화수소(HC) 및 입자상물질(PM)의 배출량 변화는 미미하였다. 질소산화물(NOx)의 배출량은 요소함량이 증가함에 따라 감소하였으며, 30.0 wt%이상의 요소수에서는 질소산화물의 저감효율이 80 %이상을 나타내었다.

• 한국자동차공학회논문집
• /
• 제20권1호
• /
• pp.95-105
• /
• 2012

The selective catalytic reduction (SCR) system is a highly-effective aftertreatment device for NOx reduction of diesel engines. Generally, the ammonia ($NH_3$) was generated from reaction mechanism of SCR in the SCR system using the liquid urea as the reluctant. Therefore, the precise urea dosing control is a very important key for NOx and $NH_3$ slip reduction in the SCR system. This paper investigated NOx and $NH_3$ emission characteristics of urea-SCR dosing system based on model-based control algorithm in order to reduce NOx. In the map-based control algorithm, target amount of urea solution was determined by mass flow rate of exhaust gas obtained from engine rpm, torque and $O_2$ for feed-back control NOx concentration should be measured by NOx sensor. Moreover, this algorithm can not estimate $NH_3$ absorbed on the catalyst. Hence, the urea injection can be too rich or too lean. In this study, the model-based control algorithm was developed and evaluated on the numerical model describing physical and chemical phenomena in SCR system. One channel thermo-fluid model coupled with finely tuned chemical reaction model was applied to this control algorithm. The vehicle test was carried out by using map-based and model-based control algorithms in the NEDC mode in order to evaluate the performance of the model based control algorithm.

• 한국자동차공학회논문집
• /
• 제18권6호
• /
• pp.76-83
• /
• 2010

Recently, as the current and future emission regulations go stringent, the research of NOx reduction has become a subject of increasing interest and attention in diesel engine. Selective Catalytic Reduction (SCR) is one of the effective technology to reduce NOx emission from diesel engine. Especially, Urea-SCR that uses urea as a reductant is becoming increasingly popular as a cost effective way of reducing NOx emissions from heavy duty vehicles. In this research, we designed urea injector and DCU (Dosing Control Unit) specially developed for controlling the Urea-SCR process onboard vehicles. As passenger and commercial diesel engine experiment, we grasped characteristics of NOx emission and SCR catalyst temperature level in advance. As a result, highest NOx emission level was shown in condition of low engine speed and high load. On the other hand, SCR catalyst temperature was highest at high engine speed and load. On the basis of these result, we conducted the NOx reduction test at steady engine operating conditions using the urea injector and DCU. It was shown that 74% NOx conversion efficiency on the average and 97% NOx conversion efficiency was obtained at high SCR catalyst temperature.